CRUX SWRFD-60L Wiring Interface Module User Manual

June 4, 2024
CRUX

INTERFACING SOLUTIONS SWRFD-60L
Radio Replacement with SWC + Aux Input Retention
for FORD, LINCOLN & MERCURY Vehicles
User Manual

PRODUCT FEATURES:

  • Retains factory features in select FORD, LINCOLN, and MERCURY vehicles while functioning with an aftermarket radio.
  • Pre-programmed to retain factory Steering Wheel Controls (on vehicles without Sync).
  • iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine, and JVC radios.
  • Retains factory Aux-Input and Subwoofer (if equipped).
  • EIA color-coded wiring for easy installation.

PARTS INCLUDED:

| | |
---|---|---|---
SWRFD-60L MODULE| SWRFD-60L HARNESS| Antenna Adapter| SWC CABLE

INSTALLATION DIAGRAM:

NOTES:

  1. Only supports analog Steering Wheel Control type.
  2. Use part number SWRFD-60 for CAN-Bus Steering Wheel Control.
  3. The output signal stated above may not cover all Years/Models.
  4. Does not retain SYNC.
  5. Not compatible with factory-installed Sony systems and THX systems with amplifier.

ANALOG CONNECTION:
HOW TO DETERMINE IF THE VEHICLE HAS ANALOG SWC:

Analog Steering Wheel Control (SWC) signal vehicles will have wires populated and line up to the PINK and BLACK wire on the 24-Pin Crux connector.
If one wire is missing then you will need to use Crux part number SWRFD-60.

**DIP SWITCH SETTINGS:

**

AFTERMARKET RADIO DIP SWITCH SETTINGS:

RADIO BRAND: DIP: 1 2 3 4
Atoto, Dual, Farenheit, Jensen, Pioneer OFF OFF ON ON
Power Acoustik, Soundstream OFF OFF ON ON
Blaupunkt, Most off-brand Radios OFF OFF ON ON
Alpine OFF OFF OFF OFF
Clarion OFF ON ON OFF
Kenwood OFF ON ON ON
JVC OFF ON OFF ON
Boss, Old Sony OFF ON OFF OFF
New Sony OFF OFF ON OFF

SWC MODULE

NOTE: For Auto, Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most off-brand radios, check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.

FORD STEERING WHEEL CONTROL DIP SWITCH SETTING:

| DIP:| 5| 6| 7| 8
---|---|---|---|---|---
Ford| OFF| OFF| OFF| OFF

SWRFD-60L
SWC MODULE

3.5MM SWC CABLE
Plug in the 3.5MM to 4-Pin SWC cable to the SWC module.
NOTE: Insulate the Blue/Yellow wire or 3.5mm plug if not being used.
For aftermarket radios that have wires for SWC connections, cut off the 3.5mm plug on the Crux SWC Cable and connect the SWC wires as follows:

Note that there are some radios that only have SWC1 and SWC2, in this case, “shield” does not need to be connected.

VEHICLE APPLICATIONS:

FORD

|

MERCURY

---|---
2004-2006| Crown Victoria| 2003-2005| Grand Marquis
2007-2010| Edge| 2006-2010| Mariner
2008-2012| Escape| 2006-2011| Milan
2004-2010| Expedition| 2005-2007| Montego
2004-2010| Explorer| 2004-2007| Monterey
2004-2012| F-150| 2006-2010| Mountaineer
2004-2012| F-250| 2008-2009| Sable
2004-2012| F-350|

LINCOLN

2004-2012| F-450| 2003-2005| Aviator
2004-2012| F-550| 2004-2006| LS
2005-2007| Five Hundred| 2006-2008| Mark LT
2009-2012| Flex| 2009-2010| MKS
2004-2011| Focus| 2010-2011| MKT
2004-2007| Freestar| 2006-2011| MKX
2005-2007| Freestyle| 2006-2011| MKZ
2006-2012| Fusion| 2007-2011| Navigator
2004-2012| Mustang| 2004-2010| Town Car
2008-2010| Taurus| 2006-2006| Zephyr
2004-2005| Thunderbird

Compatible Ford SWC Types:

| | |
---|---|---|---
Type 1
4-Button| Type 2
4-Button| Type 3
5-Button| Type 4
6-Button

NOTE:
Steering Wheel Controls are NOT retained in vehicles with Sync.

http://www.cruxinterfacing.com
Crux Interfacing Solutions
• Chatsworth, CA 91311

• phone:818-609-9299
• fax: 818-996-8188
www.cruxinterfacing.com
rev.040121

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals