dji 964CPMA495 Mini 3 Pro Fly More Kit User Guide
- June 4, 2024
- DJi
Table of Contents
- dji 964CPMA495 Mini 3 Pro Fly More Kit
- dJI Mini 3 Pro Two-Way Charging Hub (Figure A)
- Specifications
- dJI Mini 3 Pro Propellers (Figure B)
- dJI Mini 3 Pro Intelligent Flight Battery
- Compliance Information
- WE ARE HERE FOR YOU
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
dji 964CPMA495 Mini 3 Pro Fly More Kit
Carefully read this entire document and all safe and lawful practices provided before use.
dJI Mini 3 Pro Two-Way Charging Hub (Figure A)
- Status LEDs: The status LEDs display battery levels for three seconds after the batteries are inserted into the charging hub The LEDs in an array blink successively during charging and change to solid green after the corresponding battery is fully charged.
- Function Button: Press to check the battery power level. When both the intelligent flight battery and an external device are connected for charging, the battery will be charged before the external device Press and hold the function button for two seconds to switch the charging priority
- Place the charging hub on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards.
- DO NOT attempt to touch the metal terminals on the hub. Clean the metal terminals with a clean, dry cloth 11 there is any noticeable buildup.
Visit https//www.dji.com/mmi-3-pro/downloads
and refer to the OJI™ Mini 3 Pro
User Manual for more information
Specifications
- Model Number CHX162-30
- Supported Charger USB Power Delivery charger
- Input (USB-C) 5 V::: 3 A. 9 V ::= 3 A, 12 V ::= 3 A
- Output (USS) 5V=2A
- Operating Temperature 5° to 40° C (41° to 104° F)
dJI Mini 3 Pro Propellers (Figure B)
- Mount the marked propellers to the marked motors and the unmarked propellers to the unmarked motors
- Use the screwdriver provided 1n the aircraft package to remove and install the screws Unsuitable screwdrivers may damage the screws.
- Use the new screws provided with the propellers when installing DO NOT reuse old screws.
- Use two propellers from the same package DO NOT mix with propellers from other packages.
dJI Mini 3 Pro Intelligent Flight Battery
Specifications
- Model Number BWX162-2453-7.38
- Capacity 2453mAh
- Max Charging Power 37W
- Battery Type U-1on
- Chemical System LiNiMnCoO2
- Charging Temperature 5″ to 40° C (41° to 104° F)
Compliance Information
FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: OJI Mini 3 Pro Two-Way Charging Hub
Model Number: CHX162-30
Responsible Party: OJI Technology, Inc.
Responsible Party Address: 201 S. Vict0<y Blvd., Burbank, CA 91502
Website: www.dj.com
We, OJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules Operation Is subject to the
following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void Ille user’s authority to operate the equipment CAN ICES-003 (8) I NMB-003(B)
EU Compliance Statement: SZ OJI TECHNOLOOY CO., LTD. hereby declares
Illa! this device (CHX162 ·30) is in compliance with the essential
requirements and other relevant
provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at
www.dji.com/eurocompliance EU contact
address: OJI GmbH, industries trace 12, 97618, Niederlauer, Germany
Compliance Statement SZ OJI TECHNOLOOY CO., LTD. hereby declares that this
device (CHX162 30) is in compliance with the essential requirements and other
relevant
proV1SIOOS of Electromagnetic Compatibility Regulations 2016.
A copy of the GB Declaration of Conformity is available online at
www.dji.com/eurocompliance
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the corm,una1
collecting point Vl8 private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
Similar collection points. With this little personal effort, you
contribute to recycle valuable raw materials and the treatment of toxic
Substances.
WE ARE HERE FOR YOU
References
- kgf.cm
- d11.com/euro
- Accueil du site www.dj
- Dow Jones – Business & Financial News, Analysis & Insight
- DJI - Official Website