TOURATECH 01-050-6077-0 Zega Evo Topcase 38 Litres with Rapid Trap Instruction Manual
- June 4, 2024
- Touratech
Table of Contents
NEW IDEAS FOR MOTORBIKES
October 2021 by:
Touratech GmbH, Germany
We recommend having the accessory parts fitted by a specialist workshop.
| Caution
---|---
| Note
| Warning
| Liquid
| Torque
| Template
| 2 Persons
| Original motorcycle part
These instructions are written based on our current state of knowledge.
Information is provided without any guarantee as to its accuracy. Subject to
technical modifications
The order of assembly steps must be followed Touratech accepts no liability
for incorrectly fitted parts and resulting material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as EC/ECE Directives and applicable laws in your country. If parts are
fitted which require inspection and/or approval after fitting, take your
vehicle to a testing station immediately and have the vehicle papers updated
Check and if necessary tighten all bolted connections after S0 km Standard
tightening torques in Nm for bolted connections with strength class 8.8. For
special tightening torques refer to your special alist workshop!
Please take into account that fitting panniers, crash bars, foot peg lowering
kits (rider and pillion), Kickstand enlargement plate, front spoilers, and
engine guards may restrict the bike’s lean angle!
lf modifications are made to the fairing, stem, handlebar, fairing parts, etc.
to ensure that electrical wiring, brake lines, accelerator, and clutch cables
are refitted correctly. Check clearance, on both sides with full steering
lock. Always disconnect the battery when working on the electrics!
We recommend cutting protective film to size and applying it to impact areas
that are likely to be chipped by stones.
Work on the brake system and suspension should always be carried out by a
specialist workshop.
The maximum load on luggage racks is 5kg! Luggage racks ZegaPr TC is 10 kg!
ff other original accessories or aftermarket accessories are used, ensure
clearance, and fitment, and do not come into contact with other parts!
Apply conventional lubricant to stainless steel bolts prior to assembly.
pp fitting instructions also can be downloaded from the Touratech webshop
Mounting instructions
01-050-6066/6076/6067/6077-0 ZEGA Eva Topcase mit Rapid-Trap
@ November 2021 by: Touratech GmbH, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>