TOZO S2 Smart Watch User Manual

S2 Smart Watch User Manual

Turning Do-Not-Disturb ON OFF

You can control whether you receive alerts of notifications from your mobile device on your S2 Smartwatch. Click on the side button, scroll down to Settings, and then toggle on/off Do-Not-Disturb depending on your preference.

Setting-Up Notification

Go to your mobile device’s Settings and select Notifications. Scroll until you find TOZO-FIT, click and ensure that Allow Notifications is toggled on. (different phones have varying interfaces, but the principle should be similar)

Enabling Notifications

Ensure you’re allowing notifications on the TOZO-FIT app. Go to the Device tab and select Notifications. Toggle on Allow Notification on the apps you wish to accept alerts for

Notification Tips & Guide

Information on Notifications is available in the app. Go to your TOZO-FIT app, click on Device, then select Notifications. Select the “i” next to Allow Notification, which redirects you to tips and troubleshooting methods for regular occurrences.

Managing Screen-On Time

To manage the screen-on time on your S2 Smartwatch, click on the button located on the side, scroll down to Settings, select Brightness, then choose between 5-20 seconds for the screen to stay visible after use.

Controlling Brightness

To control the Brightness on your S2 Smartwatch, click on the button on the side, scroll down to Settings, select Brightness, then choose between levels 1-5 luminosity, with five being the brightest.

Monitoring Blood Oxygen (Sp02) Level

TOZO S2 Smartwatch can provide your Sp02 level by reading your pulse and calculating your heart rate. Ensure that your watchband is not too tight and keep your wrist at heart level. Press the side button, AI scroll to find Blood Oxygen, and give it a tap when you’re ready. Allow 10 seconds for the watch to get an accurate pulse reading. A 95-100% Sp02 fluctuation indicates a normal and healthy human body.

Selecting Metric System Preferences

You can change the metric system for your S2 Smartwatch through the TOZO-FIT app. First click on My, select Setting, and then Preferences. Here, you can choose which metric to display for each category.

Restoring Exercise Functions

You can restore exercise functions right in the TOZO-FIT app. First, select Device and click on More Settings. Then when you choose Training Mode, it will display every exercise functions we currently support, where you can restore the ones you removed.

Turning Off Reminders

You could control which reminders you’d like to receive using TOZO-FIT app. Go to Device and select Health Tracking to view the choices available. You’ll have to select or deselect the check sign”‘ to confirm your selection. These feature(s) will substantially impact the battery’s performance.

Setting-Up Alexa

To set up your Amazon Alexa, go on your TOZO-FIT app, select Device, How To Use, and then Amazon Alexa. This step-by-step guide will instruct you through the process and provide solutions to common issues you may encounter.

Reconnecting TOZO-FIT app

Use your TOZO-FIT app to reconnect your device to your S2 Smartwatch. Click the Device tab, select your Smartwatch on top, followed by Delete Device. Confirm your choice, then follow the prompt to connect your Smartwatch to your device again.

Restarting Bluetooth

To restart the Bluetooth connection between your device and your S2 Smartwatch, go to your Mobile Device’s Settings. Click on the Bluetooth tab, and then toggle it off. Wait one minute then turn it back on and try reconnecting again.

Re-establishing Bluetooth Connection

To re-establish the Bluetooth connection between your device and your Smartwatch, go to your Mobile Device’s Settings. Click on the Bluetooth tab, select TOZO S2 and confirm Forget Device. Proceed to follow the prompt to re- establish a new Bluetooth connection.

Performing Factory Reset

Factory Reset is done directly on your S2 Smartwatch. Press the side button, then scroll down to Settings, select Reset, and follow the prompts to complete the process. You’ll have to reconnect your Smartwatch to your device after the process is done.

Updating  Weather

Sync the data on your S2 Smartwatch to your Mobile Device by pressing the side button, scrolling to Weather, and following the prompts to complete the process.

Activating Sleep Monitor

Finding Sleep Monitor Tins & Guide

More information on sleep monitoring functions is available on the TOZO-FIT app. Boot up the app, select the My tab, click on Help, and then scroll down to the question, “How can I monitor my sleep?

Turning Wake Gesture On Off

To control the smartwatch wake gesture function, press the side button on the smartwatch, scroll down to Settings, and toggle on Wake Gesture. A shortcut to the control panel for the wake gesture would be to scroll up at the home screen on your smartwatch.

Switching Watch Dial Interface

Conveniently switch the watch dial interface for our Smartwatch directly on the S2. Press the side button, click Settings, and select Watch Faces. You can also press the dial interface for two seconds on Smartwatch’s home screen, and the interface will zoom out, allowing you to pick one of the dial interfaces

Recording Exercise Behaviors

Help your smartwatch learn your behaviors by practicing body movement in each “walking” and “running” exercise. You can do so by opening your TOZO-FIT app, clicking on the Exercise tab, and making your selection. . The more data your S2 Smartwatch gathers will effectively ensure a more , accurate step-odometer reading.

Swapping To / From Military Time

S2 Smartwatch can display both standard and military time, depending on your preference. You can make your selection through our TOZO-FIT app. Go to the “My” tab, select Settings, then Preferences, and scroll down to the bottom, where you’ll see your choice of 12-Hour System or 24-Hour System. Just one tap will be enough to confirm your selection.

Updating Daylight Savings Time

Daylight savings time will reflect on your smartwatch when you’ve made the update on the paired device. This procedure will update automatically, but you can manually synchronize the time once you’ve set daylight savings time on your mobile device. Go to the TOZO-FIT app homepage and “pull the home page down” to force the app to refresh. You should see a synchronizing status bar on the top left.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>