MUST EP1800 Portable Power Station User Guide

June 4, 2024
Must

**MUST EP1800 Portable Power Station User Guide

**

PRODUCT DISPLAY

  1. LCD Screen

  2. Light

  3. DC Switch

  4. Mains Power Button

  5. Light Switch

  6. USB Switch

  7. USB-A Output Ports

  8. USB-C Output Ports

  9. AC Switch

  10. AC Output Ports

  11. AC Charging Port

  12. Solar/Car Charging Input Port

  13. OVERLOAD PROTECTION

  14. Battery Pack Interface

  15. Main Engine Icon(M)

  16. Mains Charging

  17. Power Percentage

  18. Total Input Power

  19. Power Level Indicator

  20. XT60 Input Port

  21. Bluetooth

  22. WIFI

  23. UPS

  24. Extra Battery Pack (S1、S2)

  25. AC Output Port

  26. LED Light

  27. Total Output Power

  28. USB-A

  29. USB-C

  30. Cigar Lighter(12V) Output Port

  31. Fan Status

  32. High/Low Temperature

  33. Charge/Discharge Time

  34. Ventilation and heat dissipation ports.

Attention: Items should not be placed within 30cm to cover the heat dissipation port during charging and discharging use.

DC/AC LOAD

**Three Charging Modes

**

Connect Extra Battery Pack

Note: The extra battery pack needs to be purchased separately. A power station can be only connected with up to two extra battery packs.

Specification

  • Product Name: EP1800
  • Capacity: 1536Wh
  • AC Output: 1800W
  • AC Charging: Mains Power Input, 1500W max
  • MPPT Input: 11.5V-90V 20A 1200W
  • USB-C Output: (PD 100W) x1
  • USB-C Output: (PD 20W) x1
  • USB-A Output: QC3.0 18W Max x2
  • Car Charging Output: 12V/10A
  • Battery Cycle: >4000
  • Operating Temperature: -10~40°C

Troubleshooting Table

Phenomenon Reason Approach
The above output icon flashes, buzz. Output exceeds standard, short circuit
  1. Disconnect the device and restart the product.
  2. Replace different electrical equipment to test the machine.

Temperature warning icon flashes and beeps| The temperature of the product is too high or too low| Remove the device and turn the power OFF Wait for the device to reach the appropriate temperature.
The mains power connection logo flashes. Can not be charged| Poor charging cable connection| Check the connection status of the cable and the power supply of the power supply

Precautions For Use

  • It is recommended to use or store this product in an environment of 15°C- 30°C, Keep away from water, heat sources, and other metal objects.
  • If long-term storage is required, please charge and discharge this product once every 3 months. (Discharge to 30%, then charge to 50%).
  • For safety reasons, do not store this product for a long time at temperatures above 45°C or In environments below-10°C.
  • In order to extend the service life of the battery, it is recommended to operate at 20°C-30°C environment to use this product.
  • If it is not used for a long time, please charge it to 50% before storing it. In case of insufficient battery Long term storage under normal conditions may damage the battery core.
  • Be sure not to disassemble or modify this product, as it may cause mal- functions, and fire occurs.
  • Please use our company’s genuine accessories for accessories. Defects caused by using non-genuine products are not covered by the warranty.
  • Please discard or recycle this product according to the methods stipulated by local laws.

Step 01

BrightEMS

**Step 02

** Add Device

Step 03

Search By Bluetooth

Connecting To Wi-Fi

Connect The Network

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals