somfy 1 And 5 Channel Ysia Zigbee Controls User Manual
- June 5, 2024
- somfy
Table of Contents
- somfy 1 And 5 Channel Ysia Zigbee Controls
- PRODUCTS MAIN FUNCTIONALITIES
- COMPATIBLE END PRODUCTS
- BENEFITS FOR PROFESSIONALS
- TECHNICAL SPECIFICATIONS
- BUTTONS & INDICIATOR GUIDE FOR END USERS
- BUTTONS & INDICIATORS FOR INSTALLERS
- BATTERY INSTALLATION & REPLACEMENT
- YSIA FACTORY RESET INSTRUCTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
somfy 1 And 5 Channel Ysia Zigbee Controls
The simple, elegant, versatile control for Zigbee equipment. Works as a direct control or as part of a connected TaHoma switch solution.
PRODUCTS MAIN FUNCTIONALITIES
COMPATIBLE END PRODUCTS
BENEFITS FOR PROFESSIONALS
Convenience
- Compatible with a wide range of Somfy Zigbee 3.0 equipment and Zigbee 3.0 partnering products.
- Control one individual or one group of motorised Zigbee products per channel.
Easy Installation
- Sleek, modern look; adding a touch of elegance to every décor.
- LED feedback for easy troubleshooting and installation.
Easy programming and adjustment with TaHoma® pro
- Simple, error free programming and pairing through TaHoma Pro application.
BENEFITS FOR END USERS
Convenient and smart
- Effortlessly controls your motorized Zigbee 3.0 products
- MY Button saves a favorite position for quick and easy access.
- Comes with a discreet wall mount (White)
- Available in 1 and 5-channel options
- Compatible with TaHoma switch
- Seamlessly works in either a standalone or TaHoma solution set up.
- LED Information feedback. Emits a visual LED signal to confirm the order has been sent.
- Battery level feedback of Zigbee Ysia controls can be viewed within the TaHoma by Somfy application only.
DIMENSIONS OF CONTROL
- L1 135mm
- L2 42mm
- L3 13mm
DIMENSIONS OF WALL MOUNT
- L1 58mm
- L2 24mm
- L3 5.5mm
BOX INCLUSIONS
- 1 x Ysia Zigbee remote
- 1 x User guide
- 1 x Wall mount
- 2 x Screws and anchors
- 2 x AAA Batteries
TECHNICAL SPECIFICATIONS
- Radio Protocol
- Zigbee 3.0
- Frequency
- 2.4GHz
- IP Rating
- IP20 Indoor use only
- Radio Range
- 7m [in room: extendable with Zigbee repeaters]
- Battery Type
- 2 x AAA batteries
- Battery Lifetime
- 4 Years (based on 10 commands per day)
- Working Temperature
- 0°C to 48 48°C
ITEM NUMBERS
- Ysia 1 Channel Pure
- 1871153
- Ysia 5 Channel Pure
- 1871154
- 5 pack Wall Supports (Spare part)
- 9028373
BUTTONS & INDICIATOR GUIDE FOR END USERS
ELEMENT FUNCTION
| 1 | UP Button | Up directional button |
|---|
2
|
MY Button
| • “my” favourite position: Press button twice
• STOP command: Press button once.
3| DOWN Button| Down Directional button
4| LED Indicator| Indicates Channel Selection
5| Channel Selector Button| Select channel to operate
6| Programming Button| Initiates Zigbee programming
7| QR Code| To pair transmitter with the Zigbee network
BUTTONS & INDICIATORS FOR INSTALLERS
BATTERY INSTALLATION & REPLACEMENT
- PRESS down on the top middle of the battery cover below the channel selector button.
- SLIDE the battery cover down to remove
- FOLLOW product markings for battery orientation
- INSERT batteries into the correct positions
- SLIDE the battery cover back into position
YSIA FACTORY RESET INSTRUCTIONS
Once the Ysia control is factory reset is complete; the remote settings cannot be recovered.
-
PRESS & HOLD The programming button on the remote until the LED blinks RED 3 times. NOTE the process takes approximately 15 seconds.
RELEASE the programming button and confirm the long blinking AMBER LED. -
The remote is now in programming mode for 3 minutes.
Version 1: May 2024 SOMFY Pty Limited ABN 77 003 917 244 20/38 46 South St, Rydalmere NSW 2116 T +61 (0)2 8845 7200 somfy.au@somfy.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>