Audio-Technica ATH-CKR55BTBL Bluetooth Wireless Headphones Owner’s Manual
- June 4, 2024
- Audio-Technica
Table of Contents
Audio-Technica ATH-CKR55BTBL Bluetooth Wireless Headphones
Specification
-
Dynamic Driver type 10.7 mm in diameter and frequency 5 to 35,000 Hz in response 103 dB/mW is the sensitivity.
-
16 ohms for impedance
-
DC battery Rechargeable lithium polymer battery, voltage 3.7
-
7 hours of continuous use from the battery (200 hours standby)
-
Around three hours for charging
-
A 30 cm (11.8″) USB charging cable, ear tips in sizes XS through L, a secure-fit battery clip, and a protective pouch are provided as extras.
-
Product Dimensions 7 x 2 x 5 inches
-
Item Weight 5.4 ounces
-
Item model number ATH-CKR55BTBL
-
Batteries**** 1 Lithium Polymer batteries required
-
Color Blue
-
Connectivity Technology Bluetooth
-
Form Factor In-Ear
What’s in the box
- Headphones, silicone ear tips (XS/S/M/L)
- Secure-fit clip, 30 cm (11.8″)
- USB charging cable and protective pouch
Description
As a result of the ATH-newly CKR55BT’s created 10. With the aid of 7 mm drivers and Bluetooth wireless technology, which gives you access to the premium aptX and AAC codecs, you can enjoy robust, full-range audio everywhere you go. The headphones also have an in-line microphone, controls, and amplifier to improve the depth and resolution of the audio as well as the ability to control the playback of music and videos on compatible smartphones and other devices. Brass stabilizers that have been machined out of them provide for crisper mid- and high-frequency reproduction. The in-line mic and controls on the ATH-neckband CKR55BTs are conveniently placed for easy access, and the battery case is located on the upper back where, if preferred, it can be clipped to your shirt collar. A protective sleeve, a USB charging cord of 30 cm (11. 8″), and four sets of interchangeable ear tips in the sizes XS, S, M, and L are also included. black (ATH-CKR55BTBK) and blue (ATH-CKR55BTB) (ATH-CKR55BTBL). *The Bluetooth word mark and logos are held by Bluetooth SIG, and Audio-Technica Corporation only uses them in accordance with a license. The proprietors of other trademarks and trade names should be contacted. Condenser type, -44 dB (1V/Pa, 1 kHz) sensitivity, 100–10,000 Hz frequency response, and omnidirectional polar pattern are all characteristics of the microphone.
About this item
Bluetooth wireless technology with an integrated microphone and controls for taking and terminating calls, adjusting music and video playback, and adjusting Bluetooth wireless device volume compact, newly created 10. Outstanding, full-range wireless audio is produced by 7 mm drivers. for a sound field with increased depth and improved resolution across the frequency range, an integrated amplifier On a full charge, the internal lithium polymer battery offers seven hours of continuous use (200 hours of standby). Stabilizers made of machined brass reduce vibration for smoother mid and high- frequency sound. The little housings are created to suit ears of all sizes comfortably. aptX and AAC codecs are compatible with high-quality audio and fast response times Bluetooth is a connectivity technology.
FAQ’s
Can Bluetooth headphones be connected to an Audio-Technica device?
You may pair your wireless headphones with common Bluetooth transmitters like cellphones, computers, and even the AT-LP60-BT wireless turntables from Audio- Technica.
Does Audio-Technica make quality headphones?
A well-known company with headphones at more reasonable prices is Audio- Technica. They frequently have less-than-ideal builds, despite producing sounds that can compete with higher-end models. When compared to other companies offering comparable functionality, their noise-cancelling series also falls short.
Is Audio-Technica water resistant?
These headphones provide utterly unstoppable and reliable performance even during your arduous workouts because they are IPX5-rated, sweat-resistant, and waterproof. The battery life on these in-ear headphones is up to 6 hours, and they feature Bluetooth 5.0 technology. For quick connections, they also maintain notes of prior device pairings.
Have Audio-Technica headphones a microphone?
All Audio-Technica M-Series Headphones, including the ATH-M50x, are without an in-line microphone or controller, which is unfortunate.
Can Bluetooth headphones be used with record players?
Connecting Bluetooth headphones and speakers
For instance, with the AT-LP60XBT from Audio-Technica and the PS-LX310BT from
Sony, you just need to pair the turntable with your audio device and you’re
ready to play. Every record player with Bluetooth built-in also has a phono
preamp built-in.
Is Audio-Technica ATH-CKR55BTBL wireless?
The ATH-CKR55BTBL utilizes Bluetooth wireless technology to provide the acclaimed M50x sound characteristic of a wireless, on-the-go design. It also features 45 mm, large-aperture drivers, with rare-earth magnets and copper- clad aluminum wire voice coils.
Are wireless headphones the same as Bluetooth?
The method of connecting the headphones to a media player is the main distinction. Wireless headphones can communicate audio signals via radio waves, infrared, internal memory, or KleerNet, as opposed to Bluetooth headphones, which do so using short-range radio waves.
What are the disadvantages of Bluetooth headsets?
Not Nearly As Reliable As Wired Headphones for Audio Transmission.
Weight: Compared to Regular Headphones, Bluetooth Headphones Have More
Components.
Battery Life: Chargers for headphones are not always available and are
required.
Compatibility – Devices Must Share The Same Codecs and Bluetooth Profiles and
Be Bluetooth-enabled.
How do Bluetooth wireless headphones work?
Wireless headphones function by radio or infrared signal pairing with the device you want to use. To facilitate connections for users, Bluetooth technology is used by many gadgets. Bluetooth-enabled devices may communicate and share data across incredibly short distances utilizing radio signals.
How do I connect wireless headphones to my phone?
Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name
How do I connect my wireless headphones to my Android phone?
1. Open the settings first.
2. Then select Connections.
3. Next, select Bluetooth.
4. Next, select Scan from the screen’s top-right menu.
5. Next, hold down the power button on your headphones for a few seconds.
6. Locate your headphones, then tap them.
Why doesn’t my phone recognize my earbuds?
Check the Bluetooth settings: Tap Connected devices > Connection options > Bluetooth after opening Settings. Unpair any Bluetooth audio devices that are already paired with your phone or turn the Bluetooth switch to Off. To test whether your headphones are functional, connect them to the audio jack and play something.
How do type C headphones work with Android?
Your phone should be connected to your USB-C earbuds. Setup first: Tap Finish setup if you receive a notice that reads “Pixel USB-C earbuds connected.” Press and hold the Home button if you don’t see any notifications. Then click Complete headphone setup. Observe the directions on the screen.
If my headphones are Bluetooth, how can I know?
You should confirm that Bluetooth is turned on under the Bluetooth menu. Then, press the Bluetooth pairing button on your headphones or earphones. If you’re unsure which button that is, check your handbook to see if the power button also serves as the Bluetooth button or if there is a separate Bluetooth button.
Why won’t my Bluetooth headphones and phone pair?
Your Bluetooth devices may not be in pairing mode or be in close proximity if they aren’t connecting. If you keep having problems with your Bluetooth connection, try rebooting your devices or letting your phone or tablet “forget” the connection.
Why won’t my Bluetooth devices find me?
Your phone may not be “discoverable” even if Bluetooth is enabled. Therefore, a Bluetooth device that you haven’t yet associated with is unable to view your phone. Open the primary Bluetooth settings to make it visible to other devices. As long as you are on that screen, Android phones continue to be discoverable.