XDcuff Clips Stretcher Integrated Limb Restraint System User Guide
- June 4, 2024
- XDcuff
Table of Contents
Clips
PRODUCT REF 114 FOR STRYKER® STRETCHERS
USER GUIDE
XDcuff®Clips (FIG 1) are reusable restraint anchors designed to rapidly accept soft wrist and ankle cuffs.
Though they are meant to be permanently attached to the stretcher, Clips can
also be moved to connect to other structures, if needed.
The attached female buckle allows for connecting cuffs. Hook-and-loop
fasteners assure the anchor is not lost when static.
Anchoring positions should be determined by your lead medical authority or
where you typically anchor limb restraints. These positions are
recommendations that do not interfere with the stretcher’s daily operation and
are preferred anchoring positions for health care workers.
LOCATIONS AND INSTALLATION
-
Left Wrist Position – Loop the anchor around the chosen structure and feed the female buckle through the formed loop (FIG 2). Pull the strap through until the hook-and-loop fasteners connect (FIG 3). This left wrist position is located on the foot left section of the stretcher, near the patient’s left knee (FIG 3). If further immobility of the left wrist is desired, feed the male buckle and strap through the XPS® or armrest before connecting to the Clip (FIG 4).
-
Right Wrist Position – The right wrist position is located at the bottom of the head lift section of the stretcher, on the patient’s left side (FIG 5). When using this position, the cuff strap and buckle must be fed through the hole in the skin of the stretcher (FIG 6) and then attached to the Clip (FIG 7).
-
Right Ankle Position
This is located on the upper lift bar, towards the patient’s right foot. Do not place an anchor on lift bar grips. -
Left Ankle Position
This position is located on the upper lift bar, towards the patient’s left foot.
DEPLOYMENT
It is preferable to store ankle and wrist cuffs in the headrest storage pouch so the provider will have immediate access, if separated from the ambulance (FIG 7). Remove the cuffs from the pouch, attach them to the patient’s limb and clip the male buckle into the XDcuff®Clips female buckle (FIG 8). Clips can also be used with backboards, scoop stretchers, and stair chairs (FIG 9).
CLEANING AND MANAGEMENT
Bleach as directed or clean with alcohol-based wipes.
XDcuff®Clips are made with impermeable webbing and extremely resistant to
breakdown. Inspect the 450 LB rated buckles for cracks for damage before use.
Ensure Clips are positioned so as to not interfere with the daily operation of
the stretcher. Additional Clips can be added to the stretcher for multiple
connection points. Follow the documents included with the cuffs for more
information.
Dispose of Clips after five years of purchase.
For helpful videos or to download this document, please visit our website
listed below.
www.xdcuff.com
P. 386-275-8361
E. [email protected]
PATENT PENDING