DEITY BF1 Butterfly Antenna User Manual
- June 2, 2024
- DEITY
Table of Contents
DEITY BF1 Butterfly Antenna
Specifications
- BF1 Antenna Quantity: 2
- Antenna Pouch Quantity: 1
- Antenna Clamp Mount Quantity: 2
- BNC – BNC Cable Quantity: 2
- BNC – SMA-M Cable Quantity: 2
Product Usage Instructions
Setup Instructions:
- Screw the supplied clamp mount to the BF1 antenna.
- Connect the BNC Cable to the antenna, and the other end to your receiver/antenna distribution.
- Fix the clamp mounts to your recorder bag, and secure it in a stable position.
Antenna Bar Setup:
- Remove the clamp from the mount, and screw the mount to the antenna bar.
- Turn on your receiver and test the signal strength.
- Test the reception with various distances and locations.
- Optimize the antenna angle for optimal signal reception based on environment and requirements.
FAQ
- Q: How many BF1 antennas are included in the package?
- A: The package includes 2 BF1 antennas.
- Q: How should I test the signal strength of the receiver?
- A: Turn on your receiver and observe the signal strength indicator on the device. Ensure to test the reception at various distances and locations for accurate results.
- Q: Can I adjust the antenna angle for better reception?
- A: Yes, you can optimize the antenna angle based on your environment and signal requirements to achieve optimal reception.
Product Description
The BF1 antenna is an antenna specially designed for UHF wireless systems. It has excellent signal reception and transmission capabilities and is especially suitable for professional wireless recording applications. Its bandwidth covers 470MHz-1GHz and adopts vertical polarization mode, which can show superior performance in today’s complex RF environment. The antenna is made of composite fiberglass material, which is lightweight and strong.
Features
- Broadband gain antenna, 1/4 thread port
- Average gain 2.2dBi, omnidirectional passive
- Filter covers 470~1GHz
- Made of composite fiberglass, IP67
Packing List
Usage
- Setup
- Screw the supplied clamp mount to the BF1 antenna.
- Connect the BNC Cable to the antenna, and the other end to your receiver/antenna distribution.
- Fix the clamp mounts to your recorder bag, and secure it in a stable position.
- Screw the supplied clamp mount to the BF1 antenna.
Antenna Bar Setup
- Remove the clamp from the mount, and screw the mount to the antenna bar.
Turn on and test
- Turn on your receiver and test the signal strength.
- Test the reception with various distances and locations.
Adjustment and optimization
- Optimize the antenna angle for optimal signal reception based on environment and requirements.
- If you encounter signal interference, try moving the location or changing the channel.
Specifications
Polar Patterns and Polarization
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>