DELTACO QI-1032 Fast Wireless Charger User Manual
- October 30, 2023
- DELTACO
Table of Contents
A NORDIC BRAND
QI-1032
FAST WIRELESS CHARGER
User Manual
Safety instructions
- Keep the wireless charger away and protected from water and other liquids.
- To clean the charger use a dry cloth and make sure it is not connected to a power supply.
- Environment temperature should be: -20°C to +45°C. The following situations can cause failures like: high temperature/no or slow charging:
- The connected adapter or USB port does not have enough power output.
- The charging cable it is not compatible with the power adapter’s output.
- The phone case is too thick, recommended phone case thickness is 2-3mm.
- There is metal or a magnet on the back of the phone or phone case.
- The phone is not placed at the center of the wireless charger.
- The phone does not support Qi wireless charging.
Compatible devices
For 10W fast wireless charging:
QC2.0/3.0 adapter or original adapter with 9V output is required, otherwise it
will give 5W power.
For 7.5W fast wireless charging:
QC2.0/3.0 adapter and newest iOS system required, otherwise it will give 5W
power.
For 5W wireless charging:
Compatible with all devices with Qi charging built-in or with an accessory/add
on (Qi wireless receiver).
How to use
- Insert the USB connector of the charging cable into a power adapter. The LED will flash for a second to indicate: Powered on.
- Put your phone on the wireless charger to charge.
LED status
- When connected the LED flashes red and blue.
- The LED is lit red. It indicates standby mode.
- The LED is lit blue. It indicates charging.
- The LED is lit purple (red and blue) when fully charged.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
Address:| SweDeltaco AB
Glasfibergatan 8
125 45 Älvsjö
Sweden
---|---
Product(s) of declaration;
Type:| DELTACO QI wireless charger
Item number(s):| QI-1032
The product(s) of the declaration (mentioned above) is (are) in conformity
with the relevant community harmonization legislations;
RoHS Directive 2011/65/EU
RED Directive 2014/53/EU
And are in conformity with the following harmonized standards or directives;
| RoHS: | EN 63000:2018 |
|---|---|
| RED: | EN 60950-1:2006 + A2:2013 |
EN 62311:2008
EN 55032:2015 EN 55035:2017
ETSI EN 301489-1 V2.2.0 ETSI EN 301489-3 V2.1.1
ETSI EN 300417 V1.1.1
Name:| Thomas Bergkvist
Position:| Quality Compliance Manager
Legal signature for and on behalf of SweDeltaco AB:
www.deltaco.se
This document is only valid with all associated page
of DOC v20190904
SweDeltaco AB
Glasfibergatan 8 | 125 45 Älvsjö | Sweden
kemikaliearbete@deltaco.se | +46 (0) 8
555 762 00
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>