KYMQ-21C Electric USB Salt and Pepper Grinder Sets User Manual
- June 14, 2024
- KYMQ
Table of Contents
KYMQ-21C Electric USB Salt and Pepper Grinder Sets User Manual
BEFORE USING FOR THE FIRST TIME
To ensure safety and maintain the high quality of the product, we recommend that you read and follow the instructions carefully.
-
Do not immerse the appliance in water or any other liquid to avoid harm to human or the product.
Use for pepper and salt only, please do not use for others purposes. -
Do not force the grinder to tighten or twist it or attempt to speed up the mechanism.
-
Keep body parts (e.g. finger) and utensils away from the grinding head to avoid damage. Please hold the grinder tightly when using.
-
Keep this product away from children.
-
Do not dismantle the product by yourself, or otherwise warranty will be invalid.
-
Keep away from flammable, explosive gas, high temperature.
PRODUCT DESCRIPTION
- Indicator Light
- On/Off Button
- Container
- Container Cover
- Charging & Storage Base
- Light
- Adjuster
- Type-C Charging Cable
HOW TO CHARGE
- Connect the Type-C charging cable with an adapter, plug the adapter into an electric socket, then connect the charging cable to the Type-C interface at the back of the base.
- When charging, the indicator light lights up red, indicating it is charging normally.
- The indicator light lights up white when the battery is fully charged.
- It takes about 2.5 hours to fully charge the battery.
CAUTIONS
- This is a lithium-battery rechargeable product. When not in use, it is recommended to charge every three months to ensure service life of the battery.
- Adapter is not included with this product. Charge only with UL/GS or equivalent safety approved adapters with output voltage of 5V=
HOW TO USE
Hold the grinder tightly, and switch the container cover to open according to
the indication icons. Put pepper or salt into the container, then restore and
lock the cover.
**
Open
Switch the cover Trom to
Close
Switch the cover tromo**
Rotate the adjuster to adjust the coarseness according to personal preference.
Press and hold the on/off button to grind, release the button to stop.
-
“This product adopts an adjustment knob. The adjuster could be rotated for multiple circles between the finest and the coarsest grinding.
-
Adjust to Fine: Rotate the adjuster from “COARSE” to “FINE”. Continue to rotate for a few circles until the desired fineness is achieved.
-
Adjust to Coarse: Rotate the adjuster from “FINE” to “COARSE”. If the adjuster loosens, it could be caused by some pepper grains stuck in the burr. Start the product to rotate for 1 second, then the burr will be loosened and you can continue to adjust. This is a normal situation of ceramic burr and will not affect its normal use.
-
“If the adjuster falls off, please assemble the components in the orders shown below
-
“With seasonings in the container, please do not turn the grinder upside down for a long time in case grains of seasonings might get into the battery compartment and cause battery corrosion
TROUBLESHOOTING
If the grinder does not work or stops during grinding
- Please charge it before use. (Note: It is not recommended to use the product while charging.)
- Please adjust the adjuster with counter-clockwise direction.
If the above operations are all correct and the grinder still works abnormally, please contact the vendor for maintenance service