JUNG 2502 Blinds Actuator Reghe Datasheet
- May 15, 2024
- JUNG
Table of Contents
Product data sheet
Blinds actuator, 2-gang AC
110-230 V, 1-gang DC 12-48 V
2502 Blinds Actuator Reghe
Reference number
2502 REGHE
KNX blinds actuator, 2-gang AC 110 – 230 V, 1-gang DC 12 – 48 V
rail mounting device, 4 rail units with manual electronic operation and LED
status indication
Only with the ETS 3.0d version or later versions the full functionality will
be available.
ETS product family: Shutter
Product type: Shutter
Intended use
- Switching of electrically driven blinds, shutters, awnings and similar hangings for AC 110-230 V mains voltage or DC 12-48 V extra-low voltage.
- Mounting on DIN rail in distribution box
Product characteristics
- Suitable for 110 … 230 V AC motors and 12 … 48 V DC motors
- Automatic operation time detection for 230 V motors can be set
- Slat position directly controllable
- Acknowledgement of travelling state and slat position in bus and manual mode
- Scene function
- Top and bottom forced position via higher-level controller
- Sun protection function
Technical data
| KNX medium: | TP 256 |
|---|---|
| Outputs: | 2 channels AC 110 … 230 V, 1 channel DC 12 … 48 V |
| Power supply mains: | AC 110 V (−10 %) … 240 V (+10 %) |
| Mains frequency: | 50/60 Hz |
Connection
Connection mode:| screw terminals
single wire:| 1 x 0.5 … 4 mm²
stranded without ferrule:| 1 x 0.5 … 4 mm²
stranded with ferrule:| 1 x 0.5 … 2.5 mm²
Breaking capacity AC1:| 6 A (230 V)
Switching current DC 12/24 V:| 6:00 AM
Switching current DC 48 V:| 3:00 AM
Max. blind/shutter running time:| 20 min
Power loss:| max. 4.5 W
Ambient temperature:| −5 … +45 °C
Storing temperature:| −25 … +70 °C
Approvals:| VDE
ALBRECHT JUNG GMBH & CO. KG VolmestraBe 1
58579 Schalksmuhle
Telefon+ 49(0)2355/80 60
Telefax +49 (0) 23 55/80 6189
E-Mail[email protected]
07.12.2022