TORIN ATRM01101R BIG RED 1100 LBs Motorcycle Lift Jack Owner’s Manual
- June 1, 2024
- Torin
Table of Contents
TORIN ATRM01101R BIG RED 1100 LBs Motorcycle Lift Jack
Product Information
Specifications
- Model: 1100 trJRA
- Product: Motorcycle Cycle Scissor Jack
- Manufacturer: TarOiRo, INC.
Product Usage Instructions
Assembly
Follow the assembly instructions provided in the owner’s manual to properly set up the motorcycle cycle scissor jack.
Lifting Procedure
- Place the jack under the designated lift points on the motorcycle frame.
- Ensure the jack is stable and on a flat surface.
- Slowly pump the jack handle to raise the motorcycle to the desired height.
Lowering Procedure
- Gently turn the release valve counterclockwise to lower the motorcycle back down.
- Always ensure a safe descent by monitoring the lowering process.
FAQ
- Q: How much weight can this scissor jack support?
- A: The 1100 trJRA motorcycle cycle scissor jack is designed to support up to 1100 lbs.
- Q: Can this jack be used for other types of vehicles?
- A: It is recommended to only use this scissor jack for motorcycles as it is specifically designed for that purpose.
SPECIFICATIONS
- Capacity: 1100LBS
- Lifting Range: 3-15/16 inch ~ 13-3/4 inch
- Table Dimensions: 14-15/16-inch x 9-1/16 inch
WARNING!
- The maximum load is 1100 LBS (500 kg). DO NOT exceed this rated capacity.
- Use this lift for second-lift purposes only. DO NOT use it for any other purpose it is not designed to perform.
- Keep children and unauthorized persons away from the work area.
- Wear ANSI-approval safety goggles when operating the lift.
- Before using, lubricate the screw and the nuts with grease to make the lift flexible and antifriction.
- Always keep your hands and feet away from the working area.
- DO NOT allow untrained persons to operate the lift.
- DO NOT make any modifications to this lift.
- DO NOT expose the lift to the rain or snow.
- Ensure you read, understand and apply the safety instructions and warnings before use. Failure to heed these instructions may result in property damage and/or personal injury.
OPERATION
- Rotate the screw with a ratchet wrench to adjust the height of the platform.
- Adjust the platform to the appropriate height and place the lift on the bottom of the motorcycle. Make sure that the centre of the load aligns with the pivot, and keep the load stable and safe.
- When all the above is done, lift the motorcycle to an appropriate height.
- Tighten the motorcycle with other tools to keep it stable.
- After repairing, rotate the ratchet wrench slowly and gently to lower the platform until it departs from a pivot, and then take the lift away.
ASSEMBLY DIAGRAM
CONTACT
TORIN INC
- Ontario, CA 91761
- FOR CUSTOMER SERVICE
- PARA EL SERVICIO PARA EL
- www.torin-usa.com/support
- Made in China / Hecho en China
- www.torin-usa.com
Read User Manual Online (PDF format)
Loading......