ASUS GT-AX6000 Dual-Band WiFi 6 Gaming Router User Guide

ASUS GT-AX6000 Dual-Band WiFi 6 Gaming Router

Presentation of the material

I/O Ports Overview

LED Indicator Overviews

Features

DC power adapter

• DC output: 19V (2.37A)
• DC output: 19.5V (2.31A)

Operating temperature

• 0-40°C
• Stockage
• 0-70PC

Operating humidity

• 50-90 %
• Stockage
• 20-90%

Configuration steps with single router

Prepare your modem

1. Unplug the power cable/DSL modem If your modem has a backup battery, remove it.
2. Connect your modem to the 2.5G/1G WAN port of the router using the cable network provided.
3. Turn on the modem. Plug the modem into an electrical outlet and turn it on.
4. Check the indicator lights on your modem to make sure the connection is established.
5. If you use DSL to access to the Internet, you will need the username and password provided by your provider internet access (FAl) for configure your router.

Install your router

1. Connect the AC adapter to the power port (DCIN) and press on the power switch.
2. The Power LED lights up when the hardware is ready.

Via application

1. App On iOS or Android, open the store apps, search for ASUS Router and download the application.
2. App On i0S or Android, tap Settings > Wi-Fi, then connect to the network named with the default SSID displayed on the label on the back of the router. You can also scan the QR code located on the label for you connect to the default SSID.
3. XX comes with both last digits of the address MAC. You can find them on the label located from your router.
4. App Launch the ASUS Router app and follow the instructions for completing the setup.
5. Reset and Login Instructions.

Or via a web browser

1. Wired Connect your computer to the LAN port of the router using an additional network cable.
2. Wi-Fi Connect to the named network with the default SSD displayed on the label on the back of the router “ASUS XX.
3. [Wired/Wi-Fi] Open an internet browser. You will automatically be redirected to the ASUS Setup Wizard. In the case Otherwise, go to http://router.asus.com

Follow the instructions for perform the setup

Find ASUS Device: http://router.asus.com

FREQUENTLY ASKED QUESTIONS

1. Where can I get more information about the Wi-Fi router?
2. Online FAQ site: https://lrog.asus.com/networkinglrog-rapture-gt-ax6000-model/helpdesk
3. Driver and firmware update site: https://rog.asus.com/networking/rog-rapture-gt-ax6000-model/helpdesk
4. download Customer Service: See the Global Call Centers section of this guide.
5. You can view the user manual online at: https://rog.asus.com/networking/rog-rapture-gt-ax6000-model/helpdesk-Manual

Networks Global Hotline Information

NOTES

• UK support e-mail: network-support-uk@asus.com
• For more information, visit the ASUS support site at: https://www.asus.com/support

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location

• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 29cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada’s REL

(Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

This radio transmitter [3568A-RTAX5600] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.

References

• Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
• Radio equipment list (REL)
• ROG Rapture GT-AX6000 | Gaming networking｜ROG - Republic of Gamers｜ROG Global
• ROG Rapture GT-AX6000 | Gaming networking｜ROG - Republic of Gamers｜ROG Global
• ROG Rapture GT-AX6000 | Gaming networking｜ROG - Republic of Gamers｜ROG Global
• Official Support | ASUS Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>