reolink 2310B Video Doorbell User Guide
- June 4, 2024
- reolink
Table of Contents
reolink 2310B Video Doorbell
Specifications
- Item No.: D340 P/D340W
- Model : Reolink Video Doorbell WiFi
- Version : 58.03.001.0426A
- Manufacturer : Reolink Tech
- Website : https://reolink.com
Product Information What’s in the Box
- Doorbell
- Chime
- Corner Wedge Mounting Plate
- Mounting Extension Cable
- Jumper Cable
- Hole Template
- Ethernet Cable
- Power Adapter*
- Power Extension Cable*
- Pack of Screws
- Quick Start Guide Cable*
Doorbell Introduction
Video Doorbell PoE:
- Built-in Mic
- Lens
- Infrared Light
- Daylight Sensor
- Status LED Button
- microSD Card Slot
- PoE Port
- Reset Button
- Wiring Screws
Video Doorbell WiFi:
- Built-in Mic
- Lens
- Infrared Light
- Daylight Sensor
- Status LED Button
- microSD Card Slot
- LAN Port
- Reset Button
- Wiring Screws
Product Usage Instructions
Set up the Doorbell
Set up the Doorbell on Phone:
-
Step 1: Scan to download the Reolink App from the App Store or Google Play Store.
NOTE : If the Reolink App is already existed, please check if it is the newest; if no, please update it. -
Step 2: Power on the video doorbell. For PoE Version, connect to a PoE Switch/Injector or Reolink PoE NVR. For WiFi Version, connect the power adapter.
NOTE : The Reolink NVR should be upgraded to the latest firmware version .
WiFi
Version: Connect the Y-shape plugs to the screws on the back of the
doorbell, then power it on with the power adapter.
NOTE : It is recommended to setup the
Internet before the installation. Make sure the Y-shape plugs are separate
from each other. -
Step 3: Launch the Reolink App, scan the QR code on the doorbell, and follow onscreen instructions to finish the setup.
Set up the Doorbell on PC (Optional):
- Step 1: Download and install the Reolink Client from the website.
- Step 2: Power on the video doorbell.
- Step 3: Launch the Reolink Client, input UID number of the doorbell to add it.
- Step 4: Follow onscreen instructions to complete setup.
Install the Doorbell
For PoE Version:
- Step 1: Put mounting hole template on the wall and drill holes.
- Step 2: Install mounting plate using provided screws.
- Step 3: Run Ethernet cable through plate and wall hole to connect to doorbell, then attach doorbell to plate.
- Step 4: Power doorbell by connecting other end of Ethernet cable to PoE device.
For WiFi Version:
- Step 1: Put mounting hole template on the wall and drill holes.
- Step 2: Install mounting plate using provided screws.
- Step 3: Run the power adapter through plate and wall hole to connect to doorbell, then attach doorbell to plate.
NOTE : Reolink Video Doorbell PoE&WiFi can also be powered by the existing doorbell wiring system. In such case, you are required to first bypass the existing mechanical chime with the jumper cable to get sufficient power. Without sufficient power, the doorbell may restart and has an unstable connection, and the mechanical chime may vibrate and generate noise. If the wire is not long enough, use the extension cable, as shown below. After the installation, the existing mechanical chime will not ring anymore. Use the extension cable to extend the length of the existing power cable for the doorbell, as shown below.
Install a Wedge (Optional)
If you need to adjust the angle of the doorbell, you can use the wedge
provided. (The Reolink Video Doorbell PoE is taken as an example)
-
Step 1
Put the mounting hole template on the wall and drill holes as shown. -
Step 2
Install the wedge using the screws provided through the two holes. Ensure that the notched side of the wedge is facing outside. -
Step 3
Screw the mounting plate to the wedge. -
Step 4
Run the Ethernet cable through the wedge and mounting plate, and attach the doorbell to the plate.
Remove the Doorbell
If you want to remove the doorbell from the mounting plate, you may use the reset needle to poke the bottom.
What’s in the Box
NOTE : The Reolink Video Doorbell PoE doesn’t come with a power adapter and power extension cable.
Doorbell Introduction
Specification
- Field of View:
- Black Version: 135° Horizontal, 100° Vertical, 180° Diagonal
- White Version: 100° Horizontal, 135° Vertical, 180° Diagonal
- Dimension : 133 x 48 x 23mm
- Weight : 96g
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, mau causel harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Simplified EU Declaration of Conformity
Reolink declares that the WiFi camera is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU, the PoE
camera is in compliance with Directive 2014/30/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes. throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more: https://reolink.com/warranty-and-return/.
NOTE : We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings before returning it.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements. The
device can be used in mobile exposure conditions. The min separation distance
is 20cm. 5150-5250 MHz indoor use only.
OPERATING FREQUENCY (For WiFi Version) (the maximum transmitted power)
- 2.4 GHz EIRP<18dBm
- 5 GHz EIRP<17dBm
- 5.8GHz EIRP<14dBm
- 915MHz EIRP<14dbm
The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/ LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/UK(NI)
Technical Support
If you need any technical help, please visit our official support site and
contact our support team before returning the products:
https://support.reolink.com.
FAQ
Q: Does the Reolink Video Doorbell PoE come with a power adapter?
A: No, the Reolink Video Doorbell PoE does not come with a power adapter and
power extension cable.
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center