merax 826-AI Teddy Velvet Dressing Chair Instruction Manual
- June 4, 2024
- merax
Table of Contents
merax 826-AI Teddy Velvet Dressing Chair
Components
Part | Description | Quantity |
---|---|---|
Ax1 | Seat cushion | 1 |
Bx1 | Back cushion | 1 |
Cx1 | Left armrest | 1 |
Dx1 | Right armrest | 1 |
Ex2 | Armrest brackets | 2 |
Fx2 | Washers | 2 |
H1x8 | Screws for base attachment | 8 |
H2x4 | Short screws for seat attachment | 4 |
H3x8 | Long screws for armrest attachment | 8 |
H4x8 | Washers for armrest attachment | 8 |
H5x1 | Hex key | 1 |
PARTS AND HARDWARE LIST
Assembly Steps
- Attach the left (C) and right (D) armrests to the seat cushion (A) using the long screws (H3) and armrest brackets (E). Tighten with the hex key (H5).
- Attach the back cushion (B) to the seat cushion (A) with the washers (F), making sure the brackets (E) are aligned with the holes in the back cushion. Secure with screws (H4) and tighten using the hex key (H1).
- Adjust the height of the feet at the front by using the hex key (H5) to turn the short screws (H2).
- The final illustration shows the fully assembled chair.
Attention
The height of the feet is in front.
FAQ
What tools are needed for assembly?
A hex key (H5) is provided and is the only tool required for assembly.
How many people are recommended for assembly?
The instructions do not specify, but it is generally recommended to have at least one other person to help hold pieces in place during assembly.
Can the armrests be adjusted after assembly?
Yes, the armrests can be adjusted by loosening the long screws (H3) with the hex key (H5), repositioning, and then re-tightening.
What should I do if there are missing parts or the holes do not align?
Contact the manufacturer or the store where the chair was purchased for support and replacement parts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>