merax 29547484 Baby Playpen Game Fence Instruction Manual
- June 13, 2024
- merax
Table of Contents
merax 29547484 Baby Playpen Game Fence
Product Information
- Product Name: Baby Playpen Game Fence
- SKU/Item No.: YYP2042YYP2032
- Suitable Age: 6 Months and above
- Standard: EN71.ASTM963
- Materials: Premium HDPE
Warning
WARNING: CHOKING HAZARD—The Toy Is To Be Assembled By An Adult.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE:
- This product comes with instruction manual, please refer to and operate strictly according to the instruction manual .
- The best choice is to use the assembly indoors and avoid collisions .Check before each use that the playpen is correctly assembled
- Adult supervision is required to avoid collision and fall
- Always provide the supervision necessary for the continued safety of your child,When use for playing,Never leave child unattended .
- When child is able to pull to standing position, remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
- Never use this product if there are any loose or missing fasteners, loose joints, broken parts. Check before assembly and periodically during use.
- Discontinue use of the product when child is able to climb out .
- Once any more doubts or questions,please contact manufacturer or distributor listed on warning label sewed on this product
Product Description
- Product Name: Baby Playpen Game Fence.
- Suitable Age: 6 Months above
- Materials: Premium HDPE
- Standard: EN71.ASTM963
- Using For: Bedroom, Sitting Room, Playhouse. Outdoor with solid ground
Tips
- Make sure that the playpen is not placed on rough surface.
- Check if there is dirt on the suction cup, remove dirt with a cloth or water.
- (Recommended) if the suction cap becomes no adhesive after long term use, immerse it into warm water for 30minutes, then install it back after it cools down.
- Clean the suction caps on a regular basis (ex. once per month) to ensure their adhesiveness.
Notes
- This product is only for adult to assemble.
- Place it on a flat and clean floor.
- Use under adult supervision and climbing is prohibited.
- Keep away from fire and power supply.Do not put the product close to sharp objects, keep away from fire.
- Make sure of a wide open site for installation.
- Put the product in a well-lit room.Do not put this product in water or near water seepage.
- Can not be used upside down.
- Check all the parts are well connected before use.
- Packing materials are non-toys, please keep them properly.
- Clean the product regularly with sponge, soapy water or other non-corrosive products ensuring a healthy environment for baby.
- Recommended for 6 months – 72months.
- Please clean and hygiene the products before you use it .
- This product is only a safety aid and cannot replace adult supervision.
- After installation, check frequently to ensure proper installation and work normally.
- Do not wipe the product with corrosive chemicals.
Baby Playpen Installation
Components List
INSTALLATION STEPS
- On the upper part, Use Holder & Screw Cap (4) to connect and fix the panels, Be careful not to tighten it at this time.
- For the bottom part, Insert the Anti-slip Block (5) at the bottom of each panel. Use the Suction Cup (6) to connect and fix the panels.
- Connect all the panels as shown in the steps 1-2, choose a smooth, flat and clean ground to place the panels, adjust the desired shape, and tighten the top screw button.
- Install the Basketball Hoop (7) on the Baffle (8) and fix with screw cap (9). And install the basketball pole on the panels. Finished.
Swing Installation
Components List
INSTALLATION STEPS
- Install the Swing seats with safety Guards as above. Install the Panel and step.
- Then pass the rod through the hole of the swing to fix the position of the swing, and then fix the position locator on the other side to the metal rod.
- Attach the Steel Rod with Connector and tighten it with Metal Screw.
- Connect the Metal rod to the main fence panel with screw nuts, turn to tight. Connect the bottom rod and fence, tighten them with screws.
- Install the suction cups on the bottom rod. Tighten the swing and baby playpen with screws.
Slide Installation
Components List
INSTALLATION STEPS
-
Joint the top part of slide guard fence to the Main fence, A to A, B to B. Please find the main position, then the slide is moveable.
-
Use square plastic screw and nuts to joint two slide fence together.
-
Use metal screw to joint two pieces body slide and slide head into one piece, the connection position is on the underneath of slide.
-
Insert the 5 small size nuts, 1 middle size nut and 1 square size nut of slide into the side fence, use the nuts fasten tight. Please note there are 6 points to fasten.
-
Insert the big nuts of step panel into the main fence.
Attention: The smallest step on the top, then the middle step and large step. -
Connect the other side in same way above. Please check if the slide assembled sturdy before use it. Max Load 50kg.
- SKU: 29547484
- Item No./ Artikel Nr.: YYP2042 YYP2032
- Test Request/ Testanfrage: EN71 ASTM963
- Test Request Date/ Testanfrage Datum: 07-May-2021, 22-Apr-2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>