Merax WF309375 Dining Table Set Instruction Manual
- June 1, 2024
- merax
Table of Contents
Merax WF309375 Dining Table Set
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small part that may have come loose inside the carton during shipment.
PARTS LIST
HARDWARE LIST
TOOLS REQUIRED (Not provided)
Installation Instructions
- Step 1: Slide Table Leg 1 (2), Table Leg 2 (3) and Table Leg 3 (4) into place and attach to Table Top (1) using Flat washer (C), Spring Washer (B) and JCBB Screw (A). Tighten JCBB Screw (A) with Allen Key M5 (I). Next, place Top Support (13) to bottom Table Top (1) at the marked place and secure with Csk Screw (K) with a screwdriver.
- Step 2: Screw Cam lock Dowel (E) to Bottom Panel (5) and Insert Wood Dowel (F) to Bottom Panel (5).
- Step 3: Assembly Center Panel (6) to Bottom Panel (5) and secure using Cam Lock (D). Tighten with Screwdriver.
- Step 4: Screw Cam Lock Dowel (E) to Top Panel (7).
- Step 5: Assembly Top Panel (7) to Center Panel (6) and secure using Cam Lock (D). Tighten with Screwdriver.
- Step 6: Screw Cam lock Dowel (E) and insert Wood Dowel (F) to Side Panel R (8) and Side Panel L (9).
- Step 7: Assembly Bottom Panel (5) and Top Panel (7) to Side Panel R (8) and secure using Cam Lock (D). Tighten with Screwdriver.
- Step 8: Slide Back Panel (12) into the place between Bottom Panel (5) and Top Panel (7).
- Step 9: Assembly Side Panel L (9) to Top Panel (7) and Bottom Panel (5) and insert Wood Dowel (F) and secure using Cam Lock (D). Tighten with Screwdriver.
- Step 10: Turn the table and box shelf upside down and slide the shelf box between Table Leg 2 (3) and Table Leg 3 (4). Attach to side panel L (9) and side Panel R (8) to both leg using JCBC Screw (G) and tighten with Allen Key M4 (J) .
- Step 11: Insert Shelf Pin (H) to Side panel R (8), Side Panel L (9) and Center Panel (6).
- Step 12: Carefully slide Shelf Panel R (10) to shelf box.
- Step 13: Carefully slide Shelf Panel L (11) to shelf box.
- Step 14: Fully Setup.
PART LIST
ASSEMBLY INSTRUCTIONS
- Step 1: Insert Wood Dowel (B) to Back Leg (I) and Use Allen Key (E) to secure Side Rail (2) to Back Leg (1) with Jebe Screw (A) and Bend Washer (D).
- Step 2: Insert Side Strecher (3) to Back Leg (I).
- Step 3: Put Wood Dowel (B) to Side Rail (2) and attach Front Leg (4) to Side Rail (2).
- Step 4: Secure Side Rail (2) to Front Leg (4) using Allen Key (E), Bend Washer (D) and Jebc Screw (A).
- Step 5: Secure Side Strecher (3) to Front Leg (4) and Back Leg (I) using Csk Screw (C).
- Step 6: Secure Front Leg (4) and Side Rail (2) to Seat (5) using Csk Screw (C).
- Step 7: Fully setup.
MADE IN MALAYSIA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>