SONY CFI-ZCS2 PlayStation 5 Console Covers Instruction Manual
- June 4, 2024
- Sony
Table of Contents
PlayStation®5 Console Covers
Instruction Manual
Health and Safety
Before using this product, carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference. Parents or guardians of children should read this manual for safe use.
Warning
YOUNG CHILDREN INJURIES
Keep the product out of the reach of young children. Young children may
swallow small parts which may inflict injury or cause an accident or a
malfunction.
Precautions
Set up and handling
- After you have turned off your PlayStation®5 console and unplugged the AC power cord and cables, wait for your console to cool down before removing and attaching the covers. The main unit of your PS5® console may still be hot immediately after use, and continued handling of your console may cause burns.
- Be careful not to pinch your fingers in the gaps between parts, and not to hurt your hands and fingers on the corner of parts.
- Do not use your PS5 console without the covers. Doing so may cause fire, electrical shock, injury, or malfunction. It may also cause the main unit of your console to overheat.
- Do not place heavy items on the product, throw or drop the product, or otherwise expose it to strong physical impact.
Care and cleaning
Follow the precautions below to help prevent the product exterior from deteriorating or discoloring.
- Do not apply volatile substances such as insecticide.
- Do not allow rubber or vinyl materials to be in prolonged contact with the product.
- Do not use thinner, benzine, or alcohol. Avoid using wipes, chemically-treated cloths, and other products that contain such substances.
- Wipe with a soft, dry cloth.
Remove and attach covers
Place your console on a soft cloth spread over a flat surface before removing
or attaching the covers.
Illustrations show the console with disc drive installed.
-
Each cover has different shapes.
To ensure you attach the cover in the correct position, use the marks on the inside of the cover as a guide (see the illustration on the right). -
All covers can be removed and attached in the same way.
-
Go to the control center and select Power > Turn Off PS5.
The screen goes blank, the power indicator flashes white, and then turns off. -
Remove the AC power cord and cables, and then wait for the PS5 console to cool down.
The main unit of your console is hot immediately after use. -
Place the console with the bottom facing up and the front side facing you, and then remove the feet.
-
Remove the cover.
Slightly lift the cover away from the console to detach its clips and remove it.
-
Attach the cover.
Align the cover’s clips with the corresponding holes on the console and push in until you hear a “click”.
-
Attach the feet, connect the AC power cord and cables, and then turn on the power.
End of life product recycling
The product is made of many materials that may be recycled. Follow local regulations when disposing of this product.
CFI-ZCS2
Design and specifications are subject to change without notice.
, “PlayStation” and “PS5” are registered trademarks or trademarks of Sony
Interactive Entertainment Inc.
“SONY” and are registered trademarks or trademarks of Sony Group Corporation.
Sony Interactive Entertainment
© 2023 Sony Interactive Entertainment Inc.
Printed in China