TECHly HDMI-KVM223 HDMI KVM Extender Over Network Cable User Manual

HDMI-KVM223 HDMI KVM Extender Over Network Cable
User Manualhttps://www.techly.com/intracomsearch/search/search?sku=8059018364125

P/N: IDATA HDMI-KVM223
8059018364125

HDMI KVM EXTENDER OVER NETWORK CABLE

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTION

INTENDED USE
We do not permit using the device in other ways like described in this user’s manual. Use the product only in dry interior rooms. Not attending to these regulations and safety instruction might cause fatal accidents, injuries, and damages to persons and property. The manufacturer/supplier assumes no liability for damages caused by failure to comply with the intended use.

To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture.

• Your product is not a toy and is not meant for children, because it contains small parts which can be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be injured, or objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them while playing. Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which might come into contact with water. Do not install the product close to openings of air conditioners, or at places with an excessive amount of dust or smoke. Keeps distance from flammable and explosive devices.
• Do not install the product at places subject to vibration, or oscillation
• Do not modify and alter the product and any accessories! Do not use any damaged parts.
• Keep enough space around all devices for a good ventilation and free motion and to avoid damages.
• Please distinguish the transmitter and receiver before installation.
• Do not disassemble the machine to repair the product during the working process to avoid electric shock.
• Please cut off the power before installation. Live installation may damage the equipment.
• Use a 5V/1A DC adapter only. Make sure the specification matched if using 3rd party DC adapters.

Maintenance: clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty: no guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product.

INTRODUCTION

This HDMI Extender includes a transmitter unit and a receiver unit, allows the HDMI signal to be transmitted up to 70 meters at 1080p resolution using a Cat6/6A/7 network cable. It adopts a point-to-point connection configuration, supports KVM remote control and management and 3.5 mm stereo audio output. It is perfect for outdoor advertising, monitor system, home entertainment, conference, etc.

FEATURES

1. Zero latency
2. Support up to 1080p@60Hz resolution
3. Supports Cat6/6A/7 network cables, the transmission distance is up to 70 meters
4. Support KVM remote control and management
5. Support 1080p HDR10, YUV4:4:4
6. Support EDID passthrough
7. Transmitter supports HDMI loop-out
8. Receiver supports 3.5 mm stereo audio output
9. Audio formats supported: PCM, LPCM, DTS HD, DTS Audio
10. Automatically adjusts parameters to match different network cables and achieve the best display performance
11. Lightning Protection, Surge Protection, ESD Protection

PACKAGE CONTENTS

• 1x Transmitter Unit
• 1x Receiver Unit
• 2x DC5V/1A
• 1x User Manual
• 1x USB Cable

NSTALLATION REQUIREMENTS

1. HDMI source device (compute graphics card, DVD, PS4, HD monitoring equipment etc.)
2. HDMI display device like SDTV, HDTV, projector with HDMI port
3. UTP/STP CAT6/6A/7 cable. Follow standard IEEE-568B. It is recommended to select a network cable with less loss and crosstalk.

INTERFACES

1. Transmitter

light is off
b) Connect to the host computer, the indicator light is always on
c) The mouse and keyboard work normally, and the signal transmission indicator flashes
5| Power/Signal indicator| a) When power is on and no HDMI signal is transmitted, the indicator flashes
b) When power is on and HDMI signal is transmitted, the indicator is always on
6| DC 5V input| Connect to the 5V1A DC power adapter
7| HDMI output| Connect to a local HDMI display device
8| HDMI input| Connect to a HDMI source device

2. Receiver

light is off
b) Connect to the host computer, the indicator light is always on
c) The mouse and keyboard work normally, and the signal transmission indicator flashes
5| Power/Signal indicator| a) When power is on and no HDMI signal is transmitted, the indicator flashes
b) When power is on and HDMI signal is transmitted, the indicator is always on
6| DC 5V input| Connect to the 5V1A DC power adapter
7| 3.5mm L/R out| Connect headphones or power amplifiers to output stereo audio
8| HDMI output| Connect to a HDMI source device

INSTALLATION PROCEDURES

1. Connections

Note: When using the 3.5mm stereo audio jack, please switch the audio output format of the signal source to PCM format.
The network cable should follow the standard of IEEE-568B. It is recommended to select a network cable with less loss and crosstalk.

1. Orange/white

2. Orange

3. Green/white

4. Blue

5. Blue/white

6. Green

7. Brown/white

8. Brown

2. Connection Instruction

1. Connect the source device to the HDMI in port of the transmitter with an HDMI cable, and connect the HDMI out port of the receiver to the display device with another HDMI cable
2. Connect the CAT out port of the transmitter and the CAT in port of the receiver via a network cable (CAT6/6A/7)
3. If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter
4. Plug the power supply into the device to get started

[NOTE]: It is recommended to use a length range within 2-70m network cable. If the cable is too short, there may be no display output because the signal is too strong. If the cable is too long, the output may be with poor quality.

FAQ

Q: There is no output on screen when all connections are correct?****

– A: 1) Please make sure the HDMI cables support the resolution of the output signal from the source device.
– 2) Please check and make sure the network cable insert to the RJ45 port well.
– 3) Restart the transmitter or receiver by pressing the reset button

Q: Black screen appears on the display/monitor?****

– A: 1) Check if the length of the cable is within the specified range.
– 2) Reset the transmitter to re-built the connection.

Q: The display shows unusual color or no sound?****

– A: 1) Reset the transmitter or receiver to re-built the connection.
– 2) Check if the HDMI cables are connected well.
– 3) Reconnect the network cable.

SPECIFICATIONS

Items………………………………………………….. Specification

1680×1050, 1920×1080, 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/25/30/50/60Hz
Supports audio formats| PCM, LPCM, DTS HD, DTS Audio
Input and output TMDS signal| 0.7~1.2Vp-p(TMDS)
Input and output DDC signal| 5Vp-p(TTL)
Input cable length| ≤8m (AWG24)
Output cable length| ≤8m (AWG24)
Transmission Distance| CAT6/6A/7| ≤70m
**Protection Level| ** Electrostatic protection of the whole machine| Implementation of the standard: IEC61000- 4-2 1a Contact discharge level 4 (8KV) 1b Air discharge level 4 (15KV)

Operating Environment

| Working temperature| -20~60°C
Storage temperature| -30~70°G
Humidity (no condensation)| 0~90%RH

Body Properties

| Dimension| 75.0(L) x 85.0(W) x 20.0(H) mm
Material| Aluminium alloy material + crystal panel
Treatment Process| Grit blast
Color| Black
Weight| TX: 180h RX: 180g

In compliance with EU Directive WEEE this product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products in compliance with WEEE directive, otherwise contaminative and hazardous substances can pollute the environment
**** With the CE sign, Techly® ensures that the product is conformed to the basic European standards and directives.

All rights reserved. All trademarks and trade names are those of their respective owners.
TECHLY® – Viale Europa 33 – 33077 Sacile (PN) – Italy
WWW.TECHLY.COM

References

• TV Brackets, Audio Video HDMI, Networking | TECHLY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>