TECHly 8059018365818 1X2 HDMI Splitter User Manual
- June 10, 2024
- TECHly
Table of Contents
TECHly 8059018365818 1X2 HDMI Splitter
Dear customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SAFETY NOTES
- In order to avoid fire, electric shock or product damage, please keep the product away from rain, moisture or any other liquid.
- All parts should keep away from shaking sharply, no collision, knocking, or falling down to avoid damage.
- When you unplug the power adapter, please extract the plug gently without pulling the cable.
- Please power off when it’s not in use and unplug the power adapter if does not in use this product for long time.
- Don not open the housing or modify the module.
- Working power is 5V/1A. Please use only the power supply provided in the package, if you need to use the power from thirty part check the power adapter parameters before you change it.
- Please keep the user manual for future reference.
INTRODUCTION
This 1×2 HDMI splitter distributes 1 HDMI source like STB, DVD, Blu Ray players or PS3 etc…to 2 HDMI displays HD simultaneously. It can support 3D HDMI end 4Kx2K HDMI signal. It offer HD video solution fr STB, DVD and HD appliances, for digital signage, shopping mall, data control centers, conference room presentation, education and training centers, corporation show rooms and exhibition.
BOX CONTENT
- 4Kx2K 1×2 HDMI Splitter
- DC5V/1A Power adapter
- User’s manual
CONNECTION AND OPERATION
Connect the input source and output display to the HDMI splitter.
- Please refer to the connection image. Connect the DC 5V power supply to the splitter. Please kindly note that the power supply with higher voltage may damage the splitter. When the input source and output displays are connected and turned on, the corresponding LED will light on.
- Attention : in order to protect the splitter and your devices, please make sure the splitter is powered off before you attach in or extract video source and displays. Please insert and extract HDMI cables gently.
PANEL DESCRIPTION
Front:
-
Power LED
-
Power supply socket
-
HDMI Input
-
LED of HDMI Input
-
HDMI 1 Output
-
LED of HDMI 1 Output
-
LED of HDMI 2 Output
-
HDMI 2 Output
FEATURES
- Input Video Signal 0.5 – 1.0 volts p-p
- Input DDC Signal 5 volts p-p (TTL)
- HDMI Resolution 480p/576p/720p/1080i/1080p, 3D (1080p/24Hz), 4Kx2K
- Bandwidth: fina a 297 MHz
- EDID Duration 4 secondi
- HDMI max cable length supported 10 m input and 10 m output
- Power Supply DC 5V 1A
FAQ
Q : The splitter doesn’t appear to be functioning
A : Firstly, check if the LED lights, if the power supply is in good
condition and well connected. Secondly, make sure all cables are in good
condition and well connected. Thirdly, make sure the lenght of the cables is
within the maximum supported length of this splitter. Lastly, please try to
connect the input source to the display directly to see if the display
normally.
Q : If the maximum resolution the two display supported is not the same,
what resolution will be displayed?
A : The soliiter will display at the lower one to both display.
INTENDED USE
We do not permit using the device in other ways like described in this user’s manual. Use the product only in dry interior rooms. Not attending to these regulations and safety instruction might cause fatal accidents, injuries, and damages to persons and property. The manufacturer/supplier assumes no liability for damages caused by failure to comply with the intended use.
CAUTION : To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance :
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty :
No guarantee or liability can be accepted for any changes and modifications of
the product or damage caused due to incorrect use of this product.
In compliance with EU Directive WEEE this product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products in compliance with WEEE directive, otherwise contaminative and hazardous substances can pollute the environment. With the CE sign, Techly® ensures that the product is conformed to the basic European standards and directives. CE declaration is available on web site at the product page.