TECHly IPW-12DC1A2 Switching Power Supply Instruction Manual

October 30, 2023
TECHly

SWITCHING POWER SUPPLY

IPW-12DC1A2 Switching Power Supply

Dear Customer, thanks for choosing a Techly product.
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

 SAFETY INSTRUCTIONS

  • Your product is not a toy and is not meant for children, because it contains small parts which can be swallowed and can injure when used inappropriately!
  • Please install the system and devices attached to it in a way that persons cannot be injured, or objects not be damaged for example by dropping or stumbling.
  • Please remove the packing materials, because children may cut themselves on them while playing. Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.
  • Avoid places with high temperatures, or humidity, or places which might come into contact with water. Do not install the product close to openings of air conditioners, or at places with an excessive amount of dust or smoke.
  • Do not install the product at places subject to vibration, or oscillation
  • Do not modify and alter the product and any accessories! Do not use any damaged parts.
  • Keep enough space around all devices for a good ventilation and free motion and to avoid damages.
  • The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use.
  • Voltage-free only when the plug is pulled.
  • In case of emergency, during thunderstorms and after use, pull the product on its plug housing!
  • Do not open the housing.
  • Do not let the product unattended in use.
  • Compare the specifications of product, power supply and peripherals. These must be identical.

INTENDED USE
We do not permit using the device in other ways like described in this user’s manual. Use the product only in dry interior rooms. Not attending to these regulations and safety instruction might cause fatal accidents, injuries, and damages to persons and property. The manufacturer supplier assumes no liability for damages caused by failure to comply with the intended use.

DESCRIPTIONS AND FUNCTION

CAUTION: Compare voltage, mains voltage, frequency and polarity of product, connected devise and mains. Do not overload the product and attend to its name plate.
These products are PSUs for charging and operation of IT and office equipment by DC connection. They convert mains voltage into low voltage and provide short circuit, overload and over-current protection.

SPECIFICATIONS

Input Voltage 110V-240V, 50-60HZ
Output 12V 1.5A
Power 18W
DC connector 5.52.510MM
Output Current 1.5A
Standby power consumption 0.1W
Average  active efficiency 85%
Efficiency at low load (10%) 84%

CONNECTING AND OPERATING

  1. Connect IT or office equipment to the power supply by DC connection.
  2. Plug the PSU into a well reachable and free mains socket. Remove the unit from mains socket when not in use.

In compliance with EU Directive WEEE this product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products in compliance with WEEE directive, otherwise contaminative and hazardous substances can pollute the environment.
With the CE sign, Techly ® ensures that the product is conformed to the basic European standards and directives.
The full text of the EU Declaration of Conformity is available on the WWW.TECHLY.COM website in the product page.

WWW.TECHLY.COM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals