TECHly PD140W USB Charger Owner’s Manual
- June 16, 2024
- TECHly
Table of Contents
The Modern IT brand
USB CHARGER 140W
USB CHARGER 140W
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTION
INTENDED USE
We do not permit using the device in other ways like described in this user’s
manual. Use the product only in dry interior rooms. Not attending to these
regulations and safety instruction might cause fatal accidents, injuries, and
damages to persons and property. The manufacturer/supplier assumes no
liability for damages caused by failure to comply with the intended use.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur.
Do not expose the product to water or moisture.
- Do not open the device.
- Do not hold the device under water.
- Keep the device away from children.
- The socket which the charger is operated bust be freely accessible.
- Disconnect electronic devices from the power when not using them for longer time.
- Do not use the device when it has visible defects.
- No commitment for any damage at misuse.
CHARGING DEVICE
- Connect your device to the charger by using a suitable cable.
- Plug the charger into a properly installed and easily accessible main socket.
- Disconnect the device from the charger when you want to interrupt charging or when the device is fully charged.
- Then disconnect the charger from the mains connection.
*Always disconnect the charger from the mains before cleaning and when not in use for long time.
TECHNICAL SPECIFICATIONS
| Input | AC 110-240V 50/60Hz | Level Efficiency | VI |
|---|
USB-C™ 1 Output/
SB-C™ 2 Output| 5V3A, 9V3A, 12V3A, 15V3A, 20V5A, 28V5A
(PD140W Max)| Operating Temperature| 0°C-25°C
USB-C™ 3 Output| 5V3A, 9V3A, 12V2.5A, 15V2A, 20V1.5A
(PD30W Max)| Relative Humidity| 5% ~ 90%
USB-A Output| 5V/3A, 9V/3A, 12V/2.5A (QC30W Max)| Protections| overcurrent,
overvoltage,
overtemperature, short circuit
Compatibility| Smartphone / Tablet / Tablet PC / Power banks and other devices
Combined Output| USB-C1+C2: PD65W+PD65W (130W)
•USB-C1/C2+USB-A: 100W+30W (130W)
USB-C1/C2+USB-C3: 100W+30W (130W)
• USB-C1+C2+C3/USB-A: 65W+30W+30W (125W)
USB-C3+USB-A: 20W
• USB-C1/C2+(USB-C3+USB-A): 100W+(20W) (120W)
USB-C1+C2+(C3+USB-A): 65W+30W+(20W) (115W)
Maintenance: clean only with a dry cloth. Do not use cleaning solvents or
abrasives.
Warranty: no guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect use of this
product.
With the CE sign, Techly® ensures that the product is conformed to the
basic European standards and directives.
In compliance with EU Directive WEEE this product is marked with this
symbol. It means that used electrical and electronic products should not be
mixed with general household waste. There is a separate collections system for
these products in compliance with WEEE directive, otherwise contaminative and
hazardous substances can pollute the environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>