logitech G304 SE Lightspeed Wireless Gaming Mouse User Guide
- June 3, 2024
- Logitech
Table of Contents
logitech G304 SE Lightspeed Wireless Gaming Mouse
SETUP INSTRUCTIONS
- Remove the battery cover by pressing the top of the cover and pulling it downwards
- Remove the receiver
- Insert the battery
- Close the battery cover
- Make sure the mouse is turned on via the switch at the bottom of the mouse
- Download the G HUB software
logitechG.com/GHUB logitechG.com/support
FULLY PROGRAMMABLE BUTTONS
- Left (Button 1)
- Right (Button 2)
- Wheel click (Button 3)
- Forward (Button 4)
- Back (Button 5)
- DPI cycle (Button 6)
- On/Off switch (bottom of the mouse, not programmable)
LED INDICATOR
Battery life
Flashing red: battery <15%
DPI
- Yellow: step 1 – 400 DPI
- White: step 2 – 800 DPI (default)
- Orange: step 3 – 1600 DPI
- Magenta: step 4 – 3200 DPI
- Blue: step 5 – 6400 DPI (Step 5 can be activated via software only)
Mode
- Cyan: performance mode (default)
- Green: endurance mode (can be activated via software only).
Tips:
- Activating endurance mode will degrade tracking performance but improve battery life.
G HUB SOFTWARE
You can customize the onboard profile settings using the G HUB. These settings
include button programming, report rate, performance/endurance modes, and
tracking behavior.
G304 SE / G305 SE allows up to 5 DPI settings. By default, G304 SE / G305 SE
has the following settings:
- DPI: 400/800/1600/3200
- Report rate: 1ms
- Performance mode
© 2022 Logitech. Logitech, Logitech G, and the Logitech and Logitech G logos are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. WEB-621-002181 002
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>