BACKYARD PRO LPG36RD 36 Inch Roll Dome Griddle Propane Grill Instructions
- June 4, 2024
- BACKYARD PRO
Table of Contents
Roll Dome and Griddle
INSTRUCTIONS
Please follow the below steps to safely install the Roll Dome and Griddle attachment with your Backyard Pro Liquid Propane Grill.
TOOLS NEEDED:
Wrench Flathead Screw Driver
| (1) x1 | (2) x2 | (3) x1 | (4) x1 |
|---|---|---|---|
| (5) x1 | (6) x1 | (7) x1 | |
| A M8 x 8 (x2) | B x2 | C M10 (x2) | D M8 (x2) |
| --- | --- | --- | --- |
| E M8 x 20 (x2) | F M10 (x2) | G x2 | H M6 x 16 (x26) |
Note: Depending on your assortment of accessories you may have additional hardware.
STEP 1
Screw the connector plates onto the body.
STEP 2
The griddle plate assembly is placed on the outside of the connector plates.
STEP 3
Lock the griddle plate assembly to the connector plates with screws.
STEP 4
Install grill roll dome handle (4) to the roll dome (5) using Screw-A (2PCS)
and Washer-H (2PCS).
STEP 5
Secure roll dome (5) using Bolt-B (2 PCS).
STEP 6
Lock the lid in place by inserting the stepped screw through the outside of
the hinge hole as shown. Use nut to tighten.
STEP 7
Place a cotter pin through the small hole in the stepped screw to secure it in
place.
STEP 8
Open the lid halfway and pass the screw from the inside of the splashguard to
the outside, then lock it with two nuts. This prevents the lid from opening at
too wide an angle. Complete for both sides.
STEP 9
If using a second roll dome, install the left side panel (1) and the right
side panel (2) to the ventilation panel (3) using Screw-A (6PCS).
STEP 10
Attach the roll dome to the frame and place on the desired grilling space.
STEP 12
The accessories are now fully assembled.