ONBALANCE Champion Digital Mini Scale User Guide
- June 17, 2024
- ONBALANCE
Table of Contents
ONBALANCE Champion Digital Mini Scale
Thanks for purchasing the CHAMPION Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.
What’s In The Box
Key Descriptions
- – Turns the scale ON or OFF.
- M – Changes the mode/weighing unit.
- ZIT – Zeroes the scale. Also subtracts the weight of an empty container (see Tare Function).
- Enters calibration mode. See Calibration.
Weighing Your First Item
- Press the ON/OFF key to turn the scale on.
- Place the item on the centre of the weighing platform. You can press the MODE key to convert between weighing units.
- The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ON/OFF key to turn the scale off.
Auto-Off
By default, the scale will auto-off after 180 seconds of inactivity. To change
or disable the auto-off timer:
- Turn the scale off and hold down the MODE key, at the same time quickly press ON/OFF key 4/5 times until 180 is displayed, release the buttons.
- Press the MODE key to cycle through your choices of 0/60/120/180 seconds. Then press ON/OFF to confirm.
- The display shows ‘PASS’.
Things To Avoid
Tare Function
The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.
- Place an empty tray or container on the platform and wait for the stability indicator.
- Press the TARE key to subtract the container’s weight.
- Add items to the container to see their weight on the display.
NOTE: available The weight capacity of the and will container leave a will negative subtract value from on the display once the weight is removed. Press TARE again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most users won’t need to
calibrate their scale for a long time. You should check your scale’s accuracy
periodically using the included calibration weight and perform calibration if
necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with weights printed on the side are
not suitable for checking accuracy as these values are approximate and don’t
include the container weight (Net Weight).
Calibration
Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.
- Prepare the calibration weight.
- Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
- Press to turn the scale on and wait for the scale to stabilise.
- Press the key. The display will show ‘CAL’.
- Make sure nothing is on the platform then press to confirm the zero point.
- The display will then flash the required calibration weight.
- Place the required calibration weight on the centre of the platform.
- The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
SPECIFICATION
For more information, including weighing tips and support, scan this code with your smartphone
Or visit us online at www.obscales.com/support/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>