VISUAL COMFORT KW 3612 Armato Small Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT KW 3612 Armato Small Table Lamp
Product Information
- Product Name: Armato Small Table Lamp
- Item Number: KW 3612
- Available Options: Metal shade or Linen shade
- Bulb: Not included
- Approved for use in the United States (UL Listed)
Assembly Instructions – Metal Shade Option
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Remove the socket ring (E) from the socket cup (F).
- Install the harp (D) to the socket cup (F) and secure it with the socket ring (E).
- Remove the finial (A) from the harp (D).
- Remove the shade (C) and diffuser (B) from their packaging.
- Install the shade (C) and diffuser (B) onto the harp (D) using the finial (A).
- Note: If there is additional packaging inside the shade and diffuser, carefully cut it off to avoid damages.
- Install a light bulb into the socket.
- Remove the protective cover (G) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Assembly Instructions – Linen Shade Option
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Remove the socket ring (E) from the socket cup (F).
- Install the harp (D) to the socket cup (F) and secure it with the socket ring (E).
- Remove the finial (A) from the harp (D).
- Remove the shade (C) from its packaging.
- Install the shade (C) onto the harp (D) using the finial (A).
- Note: If there is additional packaging inside the shade, carefully cut it off to avoid damages.
- Install a light bulb into the socket.
- Remove the protective cover (G) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Care Instructions
- Clean the lamp only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents for cleaning.
Armato Small Table Lamp
- Item # KW 3612
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
- Scissors
ASSEMBLY INSTRUCTIONS
Metal shade option
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove socket ring (E) from socket cup (F).
-
Install harp (D) to socket cup (F) and secure with socket ring (E).
-
Remove finial (A) from harp (D).
-
Remove shade (C) and diffuser (B) from packaging and install to harp (D) using finial (A).
NOTE: If shade and diffuser has additional packaging, carefully cut off from interior of shade and diffuser to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (G) from plug.
-
Plug into electrical outlet and test the fixture.
Linen shade option
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove socket ring (E) from socket cup (F).
-
Install harp (D) to socket cup (F) and secure with socket ring (E).
-
Remove finial (A) from harp (D).
-
Remove shade (C) from packaging and install to harp (D) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (G) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>