Panasonic ACJ9TGWW23B WWAN Module Adapter User Manual
- June 6, 2024
- Panasonic
Table of Contents
Panasonic ACJ9TGWW23B WWAN Module Adapter User Manual
GENERAL
This device is the WWAN module adapter, WCDMA/LTE with Carrier Aggregation (CA)
Integration to the end product
- Insert WW23B module into M.2 card connector.
- Secure the end of product using the screw.
- Insert Antenna unit into Antenna connectors of WW23B module.
Technical Specification
Regulatory Information
RF Exposure Compliance information
The WW23B module will have been granted modular approval for mobile
applications. Integrators may use the WW23B module in their final products
without additional FCC / ISED (Innovation, Science and Economic Development
Canada) certification if they meet the following conditions. Otherwise,
additional FCC / ISED approvals must be obtained.
- At least 20 cm separation distance between the antenna and the user’s body must be maintained at all times.
- To comply with FCC / ISED regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the limits stipulated in Table 1.
Table 1 Antenna Gain Specifications
a. Important: Airborne operations in LTE Band 48 are prohibited.
A label must be affixed to the outside of the end product into which the WW23B
module is incorporated, with a statement similar to the following:
– This device contains FCC ID: ACJ9TGWW23B, IC: 216H-CFWW23B.
Instructions to OEM Integrators
A user manual with the end product must clearly indicate the operating
requirements and conditions that must be observed to ensure compliance with
current FCC/ISED RF exposure guidelines.
The end product with an embedded WW23B module may also need to pass the FCC
Part 15 unintentional emission testing requirements and be properly authorized
per FCC Part 15.
If this module is intended for use in a portable device, integrators are
responsible for separate evaluation and/or approval to satisfy FCC/ISED RF
Exposure requirements.
If other radio devices are to be integrated with this module, an additional
evaluation and authorization for FCC/ISED may be required. Integrators are
responsible for such additional evaluation and authorization for FCC/ISED.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>