WARNING:

DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT
FITTED WITH AN AIRBAG.

Thank you for purchasing a Group 0+ car seat. If this seat does not give you full
satisfaction, if you would like to change an accessory or obtain any help with regard
to this product, you can contact our customer services department.

SAFETY INSTRUCTIONS

WARNING:

Read these instructions carefully before use and keep this guide in case you need to refer to it in the future. Failure to follow these instructions may affect your child’s safety. To avoid any risk of falling, ensure that the handle of your Group 0+ is correctly locked and that your child’s safety harness is always fastened. Only install your Group 0+ seat on a forward facing seat fitted with a 3 point safety belt (1).

DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT FITTED WITH AN AIRBAG.

• Rigid elements and plastic parts of the child restraint device must be positioned and installed so that they do not, under normal vehicle usage conditions, become jammed under a moveable seat or in the vehicle door.
• Keep all straps used to attach the restraint device to the vehicle taut, and adjust the straps used to restrain the child. It is also important that the the straps are not twisted.
• Replace the device when it has been subjected to violent stresses in an accident.
• It is dangerous to modify or add to the device in any way without approval of the competent authority. It is also imperative to follow meticulously the instructions provided by the manufacturer concerning installation of the child restraint device.
• Keep the seat sheltered from sunlight, so that the child cannot get burned.
• Do not leave children unsupervised while in a child restraint device.
• Make sure that luggage and other objects likely to cause injuries to the occupant of the seat if impact occurs are firmly secured.
• Do not use the child restraint device without the seat cover.
• Do not replace the seat cover with a cover other than the one recommended by the manufacturer, as it directly influences the behaviour of the restraint device.
• If you are in any doubt about installation and proper use of your seat, please contact the manufacturer of the child restraint device.
• Install your child restraint system at the seating positions arranged in the ‘Universal’ category in the users’ manual, using the primary path of the belt.
• Do not use load-bearing contact points other than those described in the instructions and marked on the restraint system.
• Always give preference to rear seats, even if the highway code allows installation at the front.
• Always make sure that the car seatbelt is fastened.
• Always check that there is no food debris or other such matter in the buckle.
• In winter take care not to secure the child in with clothes that are too bulky.

YOUR GROUP 0+ (2)

1. Shell
2. Cover
3. Shoulder strap
4. Ergonomic handle
5. Sun canopy
6. Support pillow
7. Belt pad
8. Lap belt guide (x2)
9. Harness buckle
10. Harness release button
11. Crotch strap
12. Adjustment strap
13. Diagonal belt guide

IN-CAR INSTALLATION

WARNING

Do not install your Group 0+ seat on the front seat of a vehicle fitted with an AIRBAG. Always position your Group 0+ seat facing rearwards.

Place the child seat on the front or back seat of your vehicle, always facing rearwards, with the handle in the vertical position (3).
Buckle the belt (4).
Pull out the seat belt and pass the lap section through the side guides (5) (6). Pull and pass the diagonal section of the belt behind the car seat, and slide it into the guide at the back of the shell (7) (8). Ensure that the belt is not twisted and stretch it as tightly as possible (9).

ADJUSTMENT OF THE SAFETY HARNESS

The car seat harness must be adjusted to the size of your child. The shoulder harnesses can be adjusted to three heights, and they must be passed through the slots closest to your child’s shoulders.
Pull the shoulder belts through the slots in the shell and cover (10) (11) (12). Place the shoulder belts back, at the required height and use the same slots in both the shell and the cover .

• Loosen the harness: Press on the adjuster positioned between the legs at the front of the
  car seat, and pull on the two shoulder harnesses simultaneously (13).

• Tighten the harness: Pull on the adjustment strap at the front of the car seat; it is not necessary to press on the adjuster (14).

A properly adjusted harness actively contributes to the best possible protection for your baby. You must not be able to pass more than the thickness of a finger between the harness and the child

INSTALLAING THE CHILD IN THE CAR SEAT

Open the harness buckle by pressing on the red button in the centre of the buckle (15). Install your child in the car seat, ensuring that his/her back rests correctly against the back of the car seat.

Bring together the two ends of the shoulder harnesses and close the harness buckle (16). Pull on the harness adjustment strap so that the shoulder harnesses are tightened correctly against your child.

ADJUSTMENT OF THE  ERGONOMIC HANDLE

The car seat handle has 4 positions. To move from one position to another, press the buttons on both sides of the handle at the same time (17):

• Position 1: use in the car, for rocking and for carrying (18).
• Position 2: use for rocking (19).
• Position 3: use for storage (20).
• Position 4: use as a recliner in the fixed position (21).

WARNING WHEN USING AS A RECLINER

Ensure that all the locking devices are engaged before use. It is dangerous to put this recliner on a surface above the ground.
Not recommended for children who can sit up unaided (aged around 9 months, or from around 9 kg). Never leave your child in the recliner unsupervised.

STORAGE OF THE USER GUIDE

Store this instruction manual between the shell and the cover of the Group 0+ car seat (22).

MAINTENANCE ADVICE

All the fabric parts are removable. In case of light staining, clean using a sponge dampened with soapy water or wash by hand at 30° in soapy water. Never use bleach, do not iron, do not machine wash, do not tumble dry.

NOTICE

• This is a ‘Universal’ Child restraint. It is approved to Regulation N° 44/04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats.
• A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a ‘Universal’ child restraint for this age group.
• This child restraint has been classified as ‘Universal’ under more stringent conditions than those which applied to earlier designs wich do not carry this notice.
• Only suitable if the vehicle is fitted with a type approved 3 point static or retractor safety belt in compliance with standard UN/ECE 16 or other equivalent standards.

Z.I. de Montbertrand – Rue du Claret
38230 Charvieu – Chavagneux
FRANCE
www.nania.com

References

• Groupe TeamTex | Fabricant français de sièges auto pour enfant

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>