Epilady Absolute Laser Hair Removal Epilaser User Manual

USER MANUAL

Epilady Absolute Laser Hair Removal Epilaser (Model EP-720-04)

SAFETY CHART : CHECK IF YOU CAN SAFELY USE THIS LASER

Check your Skin Tone

• Use this laser. The Epilaser Absolute is intended for use only on Type I (white) to Type IV (light brown) skin tones.

IMPORTANT: DO NOT use the Absolute if your treatment area skin tone matches Type V (medium brown) or Type VI (dark brown/black). Dark skin may absorb too much laser light, which can injure the skin.

Check your Hair Color

• The Epilaser Absolute works best on naturally dark hair (black, dark brown, medium brown, or light brown).
• Absolute will operate, but will not be eective on white, gray, blonde, or red body hair.

WHERE YOU CAN AND CANNOT USE THIS LASER

WHERE TO USE THIS LASER

The Epilaser Absolute can be used on the following areas of the body:

• Women’s facial hair (cheeks and below)
• Underarms
• Hands and feet
• Bikini line
• Arms and legs*
• Back*

NOTE: Absolute works best with small areas of body hair growth (e.g., face). If used on larger areas (e.g., legs) the treatment time will be longer.

WHERE NOT TO USE THIS LASER

Epilaser Absolute is not safe for use on the following areas of the body:

• Eye areas (eyes, eyebrows, and eyelashes)
• Ears
• Nipples
• Genitals
• Anus

INTRODUCTION TO EPILASER ABSOLUTE & LASER HAIR REMOVAL

Congratulations on your new Epilaser Absolute!

The Epilady Epilaser Absolute gives you long-lasting hair removal results at home, unlike temporary solutions such as shaving and waxing. The Absolute works in the same way as professional laser hair removal. It treats the hair follicle, not just the hair, giving you permanent hair reduction after a series of treatments.

How does laser hair removal work?

• The Absolute emits a pulse of laser light, which heats the dark pigment inside the hair and deactivates the hair-producing follicle. This is what allows the Absolute to provide permanent results and is why it only works on naturally dark hair (black, dark brown, medium brown, or light brown). To be most eective, the Absolute needs to treat each hair follicle during its active growth period. Hair grows in cycles, so multiple treatments will be necessary.
• The main advantage of the Absolute system is that its beam size is only 1 mm² (0.04 inches²), thus only treating the area in immediate proximity to the hair follicle. This prevents exposing large areas of skin to unnecessary laser light, allowing you to focus eorts on the actual hairs and not the surrounding skin.
• The built-in searchlight illuminates the skin area, allowing you to choose the individual hair you intend to treat. By placing the Absolute on the skin, treatment is easy and convenient, and best of all, you can treat your skin in the comfort of your own home whenever you want.

How long should my hair be?

• Hairs must be visible at the time of treatment (as short as stubble to as long as 2mm (0.08 inches). Do not treat any hair longer than 2mm (0.08 inches). Any hair too long or thick will burn.

What does it feel like when I laser a hair?

• The sensation varies, depending on the person and the treatment area. You may feel nothing, or you may experience a warm, prickling sensation. Some users may experience mild redness that usually goes away within 24 hours.

How long should I treat the area(s) I want to laser

• For best results, treat every 2 weeks for up to 3 months or until you are satised with the amount of hair reduction.

Read these instructions before using

We recommend saving these instructions for future reference. Before you use your new Epilaser Absolute read this instruction manual to:

• Determine if the Absolute is safe for you to use (see page 1)
• Learn how to correctly use the Absolute (see pages 17-21).
• Review the contraindications (see page 8) and warnings and safety information (see page 9-10). This Warning Symbol appears next to information about possible safety risks.
• Read our Treatment Tips for best results (see page 20).

Who should I contact if I have questions or concerns?

• Please contact EpiladyUSA Customer Support at 713-666-4582 or email support@epiladyusa.net.

Epilaser Absolute Safety Features

• Laser Power Switch – To prevent accidental use the power switch at the bottom of the laser unit must be turned 1/4 of a turn to turn on the laser.
• Skin Contact Sensor – The laser treatment window must be in full contact with the skin in order for the laser to operate. It will deactivate the laser when not in full contact with the skin.
• Skin Tone Sensor – A built-in skin tone sensor will deactivate the laser when used with skin tones that are too dark and “Not Safe” (Types V and VI, see chart on page 1).

All 3 of these conditions must be met in order for the Absolute to operate.

EPILASER ABSOLUTE’S 3 SAFETY FEATURES

EPILASER ABSOLUTE INTENDED USE(INDICATIONS)

• Epilaser Absolute is an over-the-counter device intended for adjunctive use with shaving for hair removal sustained with periodic treatments. The Absolute is also intended for permanent reduction in hair regrowth dened as a long-term, stable reduction in hair counts following a treatment regime. Permanent hair reduction is dened as long term, stable reduction in the number of hairs regrowing when measured out to 6, 9, and 12 months after the completion of the treatment regimen.
• It is intended for use only on light to medium skin tones (see the Skin Tone Safety Chart on page 1) and naturally dark hair. The Absolute will operate, but will not be eective on white, gray, blonde, or red hair.

WHO SHOULD NOT USE THE EPILASER ABSOLUTE (CONTRAINDICATIONS)

• DO NOT use the Absolute if your skin tone matches one listed as “Not Safe” on the Skin Tone Safety Chart (see page 1). If you use the Absolute on medium brown, dark brown, or black skin tones—all indicated as “Not Safe” for treatment—the skin may absorb too much laser light, resulting in burning, discoloring, or scarring.

NOTE: The Absolute is equipped with a built-in skin sensor. If the sensor
determines that your skin tone is “Not Safe,” it will not give the treatment.

• DO NOT use the Absolute if you are under the age of 18. Do not use the Absolute on anyone else under the age of 18. The use of the Absolute on or by children under the age of 18 has not been studied and could result in serious injury.
• DO NOT use the Absolute if you have a lighter hair color, such as blonde, white, red, or gray. For the laser to work, you must have naturally dark hair in the area to be treated. Lighter hair pigments will not absorb enough of the laser’s energy to deactivate the hair follicle.

WARNINGS

DO NOT use the Epilaser Absolute on the following areas of your body:

• On or around the eyes, eyebrows, or eyelashes. Doing so may cause permanent eye injury. Anywhere on or around the forehead, temples, nostrils, ears, nipples,  genitals, or around the anus. These areas may have more sensitive skin, a darker skin tone, and/or a greater hair density, and using the Absolute there may cause skin injury.
• On parts of your skin that are darker than your usual skin tone: tattoos, dark brown or black spots (such as large freckles, birthmarks, or moles), tanned skin, or skin that is red or swollen. Dark skin may absorb too much laser light, which can injure the skin.
• On damaged skin including open wounds, cold sores, sunburns, or areas where you have had a skin peel or other skin resurfacing procedure within the last 6-8 weeks (check with your doctor). These conditions can make the skin more susceptible to injury.
• On any area where you may someday want your hair to grow back. The results may be permanent and irreversible.

DO NOT use the Epilaser Absolute if the Skin Tone Safety Chart shows

that your skin tone is identied as “Not Safe.”

• If you have African, Indian, Native American, or Pacic Island heritage, you may have a skin tone that is not suitable – be sure to check the Skin Tone Safety Chart on page 1. Darker skin tones may absorb too much laser light, which can injure the skin.
• Hair removal by laser can cause increased hair growth in some individuals. Based on currently available data, the highest risk groups for this response are females of Mediterranean, Middle Eastern, and South Asian heritage, treated on the face and neck.

DO NOT use the Epilaser Absolute if you are pregnant or breastfeeding.

• The Absolute has not been tested on pregnant women. Hormonal changes could increase skin sensitivity and the risk of skin injury.

DO NOT point the laser at your eyes.

The laser could cause permanent and irreversible damage.

DO NOT use the Absolute for any purpose other than hair removal.

DO NOT use the Absolute if it appears to be damaged. DO NOT attempt to open or repair the Absolute.

• These actions increase the risk of skin or eye injury. Please contact EpiladyUSA Customer Support for assistance if your Absolute appears to be damaged.

Always follow the basic safety precautions for electrical devices:

• DO NOT get the Absolute, the cable, or your power adaptor damp or wet.
• DO NOT use the Absolute while bathing or place it near a tub or a sink.
• DO NOT use a power adaptor with a damaged plug or cord.
• ALWAYS keep the cable away from heated surfaces. Failure to follow these precautions can cause electrocution or electric shock.

DO NOT drop the Absolute or any of its components, as this may damage the

device.

BENEFITS & RISKS

Benefits

When used as directed, the Epilaser Absolute is an over-the-counter device for personal use that provides permanent hair reduction. The results vary from person-to-person and depend on which body area is treated and how closely treatment instructions are followed.

Risks

It is important to use the Absolute properly. Make sure that you understand and follow all warnings and instructions. The skin tone sensor will not allow the laser to treat if you try to use the Absolute on skin tones designated as “Not Safe” (see page 1).
If you use the Absolute as directed, the risks are low.

• You may experience mild to moderate pain or discomfort during the initial treatments, with a reduction in sensitivity over time. This is normal. You may feel warmth, burning, tingling, or itching. If the pain is too intense or persists after a treatment, stop using the Absolute and check with your doctor before using it again.
• Your skin may become red directly following treatment or within 24 hours. This redness generally clears up within a few hours. See your doctor if the redness does not go away within 2-3 days.
• In rare cases, some users may see an increase in the number of hairs in the treated area after the initial treatment. If this increase persists over several treatments, stop using the Absolute and see your doctor.
• In rare cases, some users may experience skin-swelling, especially around the hair follicle. If the swelling doesn’t go away within 2-3 days, stop using the Absolute and see your doctor.
• In rare cases, temporary or permanent skin discoloration may occur. Because of the small treatment area (1 mm² (0.04 inches²) – about the size of a pencil tip), any discoloration will be in a very small spot, and will barely be noticeable. If your skin color changes, stop using the Absolute and see your doctor.
• In rare occasions, blisters may form on the treated area. This is very unlikely for people with a light or medium skin tone. If you develop a blister, stop using the Absolute and do not let the blister become infected. Consult your doctor if needed.

GETTING TO KNOW YOUR EPILASER ABSOLUTE

(A) Treatment Window: The end of the laser that must make contact with the skin and the area you wish to laser. When the laser is on you will see a white light shine from this end.

(B) Power Switch: Rotate 1/4 turn to turn the laser device on.

(C) Indicator Light: A light at the bottom of the laser that lets you know the status of the laser.

• Blinking red = Charging
• Orange = Charge complete
• Green = Laser turned

(D) Cap: Covers the laser when not in use.
(E) Charger Cable: This cable has 2 ends:

• USB end – connects to your USB-compatible charger (e.g. phone charger, computer).
• Pin plug end – connects to the laser.

EPILASER ABSOLUTE TREATMENT OVERVIEW

Before Your First Treatment

• Do not get a skin peel or other skin resurfacing procedure six weeks or less before your rst treatment.
• Fully charge the laser.
• Perform 3 spot tests on the area you want to treat at least 1 day before treatment (see page 15).

Between Treatments

• Continue your normal hair removal routine (e.g., epilation, waxing, shaving) since the laser treatment does not remove the hair immediately. This will not interfere with the laser’s functionality between treatments.

During Your First 3 Months

• After your rst treatment there will be no visible change to the hair. Laser hair removal does not cause hair to immediately fall out.
• The treated hair will eventfully fall out on its own. You may also remove the treated hair with tweezers after treatment, if desired.
• With additional treatments there will be a gradual reduction in the number of hairs. The hair that does regrow will also begin to lighten and become ner.

After Your First 3 Months

• Hair follicles that have been deactivated by the Epilaser Absolute will not grow back.
• Perform occasional touch-ups or additional treatments if necessary.
• For best results, treat every 1-2 weeks for 2 months or until you are satisfied with the amount of hair reduction.

SPOT TEST INSTRUCTIONS

• Before your rst full treatment, we recommend doing 3 spot tests with the Epilaser Absolute on the area(s) you plan to treat at least 1 day before.

Spot Test Instructions

• Prepare your skin (see page 17).
• Turn on the Absolute.
• Follow treatment instructions on pages 17-21 for treatment on one hair (rst laser pulse).
• Shift the laser over within the treatment area and test with a second laser pulse.
• Test up to 3 spots on the area you wish to treat.
• Wait 24 hours and examine the tested spots:
• If the skin appears normal, you may begin your rst treatment.

IMPORTANT: If you notice blistering, burns, changes in your skin tone, or any other side eects, DO NOT USE your Absolute. If needed, contact your doctor. If you are unsure about the outcome of the test, do not use your Absolute and contact Epilady USA Customer Support before continuing use.

CHARGING THE LASER

Before your rst treatment and between treatments, charge the laser.

• Connect the pin end of the charger cable to the laser.
• Connect the other end (USB) to your USB charger.
• The indicator light on the bottom of the laser will blink red while the laser is charging.
• The charge is complete when the light at the bottom of the laser turns orange. Once the laser is charged, unplug the charger cable. Do not leave it on the charger after charge is complete, as that will shorten the battery life.

CHARGING NOTES:

• The laser will begin to charge once connected to the charger.
• If you have not used the Absolute in several weeks, charge it.
• If you use the Absolute frequently, charge as needed.
• To prevent damage to your Absolute, use only the included
  power cable, and a phone-ready USB charger. If you lose the
  charger cable, please contact Epilady USA Customer Support.

EPILASER ABSOLUTE TREATMENT INSTRUCTIONS

NOTE: Before every treatment check the charge of your Epilaser Absolute. If you turn it on and the red light is on rather the green, connect it to the charger.

Prepare Your Skin

• Clean the treatment area. Remove all cosmetics, lotions, and
  creams that may block the laser light.

• Dry the treatment area.

Remove Cap from Laser

• Removethe protective cap from the laser.

3. Turn On Laser

• Rotate the bottom of the laser 1/4 turn. The indicator light at the bottom of the laser will turn green and an audible signal will emit to let you know the laser was turned on.
• Once the laser is on, thetreatment window will emit a white beam of light to let you know the Absolute is ready for use. This is not the laser beam. It is a light that allows you to see the skin. You can see this light reected o your hand if you put the hand near the treatment window.
  NOTE: If not used for 2 minutes the laser will automatically turn off.

4. Target and Treat Hair

• Press the treatment window fully against your skin on the area you want to treat. If the skin tone sensor detects that the skin is “Not Safe” the laser will not give the treatment.
• When you have good contact with the skin, hold the Absolute in place for two
  seconds. It will apply the laser treatment automatically. There is nothing to push, simply hold the device in place, ush against the skin.

Target and Treat Hair

• When the laser treats the area, the green indicator light will ash. You will be able to see this in the mirror you are using.
• If the Absolute is moved too soon, the indicator light will ash red and an audible signal will sound, indicating that the treatment was not applied.
• If this happens, simply reposition the device, hold against the skin, and count to 2.

NOTE the following when treating a hair:

• The laser will emit only one pulse, then will need to be lifted from the skin and
  repositioned. It will not apply more than one pulse if not moved from the skin.

• After treatment, the hair will still be visible on the skin.

5. Reposition and Repeat for Next Hair

• After treating one hair, shift and reposition the treatment window in the area until you have located another hair you want to treat. Follow step 4 (see page 19) for each hair you wish to treat.

Treatment Tips

• Using the Absolute correctly takes some practice. At rst, it may take some time to correctly target and treat the individual hairs. It may help to use two hands, or to rest your elbow on a at surface (table, counter, etc.) for increased stability. Once you have developed your skills, treatment will become easier– and you will even have some fun!
• In order to help you to position the Absolute correctly on your face, you should use a mirror. Sitting across from the mirror will allow you to target the desired treatment area before you apply the Absolute to your skin.
• For best results, treat every 2 weeks for up to 3 months or until you see the desired results.

Will my hair fall out after treatment?

• Not immediately, but the treated hair will eventfully fall out on its own. You may also remove the treated hairs with tweezers or an epilator after treatment, if desired.

NOTE: Laser hair treatment does not immediately remove the treated hair(s). The intended result is that the hair follicle will be deactivated upon impact and will not grow a new hair.

6. Turn O the Absolute when Done with Treatment

• Twist the power switch at the bottom of the device 1/4 turn to the o position. The indicator light will turn o, and an audible signal will sound.

7. Remove Charger Cable

If for some reason you had the Absolute plugged in while using it (you should not), remove the cable and store it with the device.

8. Replace Cap

• Put the cap back on the end of the laser over the treatment window.

CARING FOR YOUR EPILASER ABSOLUTE

The Epilaser Absolute doesn’t require special care, but we do recommend that you keep it clean, especially the treatment window area.

Cleaning the Laser

• Turn OFF the Absolute and uplug the power adaptor from the device and the electrical outlet.
• Clean the device by gently wiping it with an alcohol wipe.
• Focus on the areas that have touched your skin, especially around the treatment window.
• Take care to avoid damaging the interior of the treatment window.

DO NOT clean any part of the Absolute kit with soap and water.

DO NOT insert anything into the treatment window opening or any other

part of the laser.

DO NOT get the Absolute or power adaptor and cable damp or wet.

If wet, do not use the Absolute or the power adaptor and cable. Performing a treatment with a wet Absolute (or component) can cause electrocution or electric shock. If any of the parts do accidentally get wet, allow wet parts to dry thoroughly before trying it again.

Recharge Every 3 Months for Long-Term Storage

If you do not plan on using your Epilaser Absolute for a long period of time, we recommend that you recharge the device every 3 months to maintain the life of the battery. Refer to the charging instructions in this manual for charging procedure.

Recycling/Disposal

The Epilaser Absolute contains three lasers, advanced circuitry, and rechargeable batteries. To recycle or dispose of these components, please follow your local regulations or contact EpiladyUSA Customer Support.

TROUBLESHOOTING

Please call EpiladyUSA Customer Support at 713-666-4582for additional help.

LIMITED WARRANTY

Warranty Limitations and Disclaimers

Epilady USA, Inc. makes every effort to ensure that its products are manufactured without any defects. However, in the rare event of a defect due to faulty workmanship or materials, we guarantee the repair or replacement of the product, or any part thereof, free of charge.

• This guarantee is granted to the original purchaser only and is valid for one year from the date of purchase. Proof of purchase must be presented for warranty service.
• This guarantee is not extended for any period during which the Epilaser Absolute (or any part thereof ) is in repair or if your Absolute is replaced by Epilady during the warranty period.
• This guarantee is only valid for products purchased from authorized retailers or directly from Epilady.
• This guarantee is only valid for products purchased in the United States of America and its territories.
• This guarantee does not apply if the product is altered, repaired, or otherwise tampered with by unauthorized persons. This guarantee does not apply if the product is used other than in accordance with the manufacturer’s instructions.
• This guarantee does not apply if the product is dropped or otherwise damaged by the user.

Service

DO NOT return your product to the seller if you need service.

If your Absolute needs service before the 1-year warranty period expires, contact EpiladyUSA Customer Support. We will issue you a Return Authorization (RA) number to send in your Absolute for repair/replacement.

Do not send in your absolute without obtaining an RA number first. It will not be serviced and may get lost.

• If we discover a defect covered by the warranty, our service department will determine the cause of the issue and repair/replace your product accordingly.
• If we find that the defect in your absolute is not covered under this limited warranty, we will notify you about the service alternatives that are available on a fee basis.
• If we find that your absolute is not defective, we will notify you and return your absolute to you.

All limited warranty services must be authorized and performed by EpiladyUSA, Inc.

TECHNICAL SPECIFICATIONS

• Laser Type: Diode laser

• Laser class: 1M

• Output wavelength: 808 +/- 20% nm
  24 J/cm2

• Power adaptor input: 100-240V, 50-60Hz, 0.5A

• Power adaptor output: 5.0V DC, 2.0A

• Battery life expectancy: Up to 1,000 charges

TREATMENT JOURNAL

Use the table below to keep track of your Absolute treatments.

EPILADY CUSTOMER SUPPORT

United States

713-666-4582
support@epiladyusa.net
www.epiladyusa.com

FCC Compliance Statement

This device complies with Part 18 of the FCC Rules & Regulations. Operation is subject to the following two conditions:

• This device may not cause harmful interference and
• This device must accept any interference received, including interference that may cause undesired operation.

Covered by one or more of the following patents:
U.S. patent No. 9,364,684 B2. Additional patents pending.

FDA 510K No. K170970

©EpiladyUSA, Inc. 5250 Gulfton Street, Suite 4B, Houston, TX 77081 USA

All rights reserved. Epilaser, Absolute, Epilady, and the Epilady logo are trademarks of EpiladyUSA, Inc.

Read More About This User Manuals…

Epilady-Absolute-Laser-Hair-Removal-Epilaser-Manual- Optimized.pdf

Epilady-Absolute-Laser-Hair-Removal-Epilaser-Manual- Orginal.pdf

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>