SENNEISER RMS 1 Over Ear Headphone Instruction Manual

: June 5, 2024
: SENNEISER

Table of Contents

SENNHEISER RMS 1 Over-Ear Headphone
SPECIFICATIONS
OPERATION
Setup
LED operation indication
Important safety instructions
Manufacturer declarations
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SENNHEISER RMS 1 Over-Ear Headphone

SPECIFICATIONS

Dimensions 33.9 x 19 x 55.4 mm
Weight 26 g

OPERATION

Overview 1. Mic button
2. Status LED
3. 3.5 mm jack plug
4. MZQ 2002 cable clip

Setup

LED operation indication

SK 300 G3 Mode	Mic button 1	Function	LED 2
Disabled	Disabled	Disabled
AF On/Off	A Press

B Press again

| Audio signal is muted

Audio signal is activated

| off

on

RF On/Off| A Press

B Press again

| RF signal is muted

RF signal is activated

| off

on

If you program the “Push To Talk” mode, the SK is muted

Important safety instructions

Read these safety instructions and instructions for the product.
Keep these safety instructions and instructions for the product. Always include all instructions when passing the product on to third parties.
Always include this manual when passing the product on to third parties.
Only use attachments, accessories and spare parts specified by the manufacturer.
Do not attempt to open the product housing on your own. The warranty is voided for products opened by the custo-mer..
Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, liquid has been spilled or objects have fallen into the product, when the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
Use the product only under the conditions of use listed in the specifications.
Do not operate the product if it was damaged during transportation.
Always run cables so that no one can trip over them.
Keep the product and its connections away from liquids and electrically conductive objects that are not neces-sary for operating the product.
. Do not use any solvents or aggressive cleaning agents to clean the product.
Caution: Very high signal levels can damage your hearing and your loudspeakers. Reduce the volume on the con-nected audio devices before switching on the product; this will also help prevent acoustic feedback.

Intended use
The product is designed for indoor use only. The product can be used for commercial purposes. It is considered improper use when the product is used for any application not named in the corresponding instruction manual. Sennheiser does not accept liability for damage arising from im-proper use or misuse of this product and its attachments/accessories.

Manufacturer declarations

Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.

FOR AUSTRALIA ONLY
Sennheiser goods come with guarantees that cannot be exclud-ed under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any liability of Sennheiser which is imposed by law, or limits or modifies any remedy available to the consumer which is granted by law. To make a claim under this warranty, contact Sennheiser Technical Services and Spare Parts Sales c/o Linfox, Gate 3, 1 Fox Lane, Erskine Park, 2759, NSW Australia

Phone: (02) 9910 6700
email: au-service@sennheiser.com
All expenses of claiming the warranty will be borne by the person making the claim.The Sennheiser International Warranty is provided by Sennheiser Australia Pty Ltd (ABN 68 165 388 312), The Zenith, Tower A, L14, 821 Pacific Highway Chatswood NSW 2067, Australia. In compliance with the following requirements

Notes on disposal
The symbol of the crossed-out dumpster on the product, the (rechargeable) battery (if applicable) and/or the packaging indi-cates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their service life. For the packaging, follow the regulations in your country for separating waste. Improper disposal of packag- ing materials can be harmful to your health and the environment. The separate collection of waste electrical and electronic equip-ment, (rechargeable) batteries (if applicable) and packaging is intended to promote reuse and recycling and to prevent negative impacts on public health and the environment, for example due to hazardous substances contained in these products. At the end of their service life, recycle electrical and electronic equipment and (rechargeable) batteries so that their materials can be reused and to prevent environmental pollution.

If (rechargeable) batteries can be removed without destroying them, you are obliged to dispose of them separately (see the product’s operating instructions for information on how to re-move the batteries safely). Be especially careful when handling (rechargeable) batteries containing lithium, as these pose special hazards, such as the risk of fire and/or health risks if button cells are swallowed. Reduce battery waste as much as possible by us-ing longer-life batteries or rechargeable batteries. Further information on the recycling of these products can be obtained from your municipal administration, from the munici-pal collection points, or from your Sennheiser partner. You may also be able to return electrical or electronic equipment to your distributor, if they are legally required to do so. By disposing of your batteries properly, you are helping to protect public health and the environment.
UK Declaration of conformity