Sharper Image Portable TV / Digital Media Player User Manual

Item No. 206668

USER GUIDE
Thank you for purchasing the Sharper Image Portable TV and Digital Multimedia Player. Please read
this guide carefully and store it for future reference.

Before Your Start

Please take note of the following before you start.

WARNING

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

• The mains plug is used to disconnect the device from power. The mains plug must remain readily accessible and able to disconnect completely from the mains.

• The apparatus should not be exposed to dripping or splashing liquids. No objects filled with liquids, such as vases, shall be placed on the apparatus.

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as direct sunshine, the interior of a parked car, fire or the like.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
  Storage

• Keep this product away from extremely hot or cold places. This storage temperature range of this device is 20°C to 60°C (-4°F to 140°F); the operating temperature range of this device -5°C to 40°C (23°F to 104°F).

• Do not use this product in a damp environment (e.g., in or near bathtubs, wash basins, kitchens, basements, swimming pools, or similar places).

• Do not expose your TV set to high humidity, dust or smoke (including auto exhaust).

• Do not throw or drop this product.

• Do not subject this device to strong vibrations or impact. If using the device in a car, rough roads will shorten the life of your device.

• Do not puncture or abrade the device, or otherwise subject it to strong forces.

Maintenance

• Disconnect power and all cables from this device before cleaning it.
• Use a soft cloth to wipe the screen, enclosure, and keys. If necessary, use a cloth lightly moistened with water to wipe the device. Do not use rough or abrasive materials to wipe the device (e.g., a polishing cloth).
• Do not clean the device with astringents, propellants, or cleaning agents (including alcohol and benzene)

WARNING

• Do not use this device while operating a car or other motorized vehicle. Obey all local and federal regulations when using this device. There may be specific laws in your area to prevent distracted driving.
• For your safety and the safety of others, do not turn the TV on or watch TV programs while driving.

Notice

• The panel used in this television contains millions of thin film transistors that have been manufactured using a high-technology process to deliver a crisp, clear, and detailed picture. Occasionally, a few of these transistors may become stuck or non-active; please note that this does not affect the performance of the television. These light or dark spots are within the normal operating tolerances of the unit; do not attempt to fix the screen.
• This unit is controlled by microcomputer. If it should freeze, please restart it.
• If the TV behaves abnormally, turn it off immediately and please contact us or the retailer. This device contains many finely tuned electronic components but has no user serviceable parts inside. Disassembly or alteration may result in damage or serious injury.

In the Box

Please take a moment to make sure that you have everything in the list below.

• Portable TV
• Stand
• AC power adapter
• DC car power cord
• Antenna extension adapter
• External antenna
• A/V cable
• Remote control
• User manual

At a Glance

Main Unit

Remote Control
Power        Power Switching Key. Turn the TV on or off.
ZOOM     Picture modes
FREEZE  Temporarily pause the video.
MUTE      Enable/disable the sound output.
Channel Keys  Use the number keypad to change the
Return       Go to the last viewed channel.
SOURCE  Change the active input source mode (TV, AV,
MEDIA)
INFO        View program information.
Up/Down  Browse up/down in menu lists.
Left/Right  Browse left/right or adjust an option in menu
lists.

EXIT        Exit the system menu.

AUDIO    Change the default audio language.

CC           Change the closed-caption display modes

EPG        If available, view program guide informa-
tion from over-the-air ATSC TV broadcasts.

P.MODE  change the picture preset mode.

TTS        Voice prompt function On/Off

CH.LIST  View all the available channels

FAV.LIST    View the channels in your favorites list.

SLEEP       Set a sleep timer (max 240 minutes

The following keys only work when playing music/vid-
eos in CARD or USB mode.

REP     Change the repeat mode.

Basic Operation

Connect the Power Supply
Use the supplied power adapter to connect the DC In-
put jack [20] on the TV to a power supply. The AC power adapter works with AC 100-240 Voutlets; the DC car adapter works with the power socket found in most
motor vehicles.

To adjust the volume when playing an MP3
key on the
TV to hide the system menu, then press
VOL or VOL to adjust the volume. To
return to the system menu, press OK

.

Connect the Antenna

Use the supplied external antenna for improved TV reception. Connect one end of the antenna extension
adapter to the Antenna Input jack [15] of the TV. Con-
nect the other end of the adapter to the supplied ex-
ternal antenna.

Connect an External A/V player

The TV can accept composite video and audio signals
from external players (e.g., DVD player). Using the
supplied A/V cable, plug the side with the 1/8” jack
into the AV IN [17] connector of the TV. Connect the
yellow RCA plug to the composite video out jack of the external player; connect the white and red RCA plugs to the L/R audio out jacks of the external
player, respectively.

Setting the Input Source

Set the input source to choose which connection is ac-
tive and displayed on the TV screen.
Press MODE [5] to access the input source menu, then
press CH or CH [8, 9] to change the input source.
Adjusting the Volume

•  Use the VOL and VOL keys [11, 12] to increase or decrease the volume level, respectively.
• Using the Number Keypad

Use the number keypad

(0-9) on the remote to tune di-

rectly to a channel or to input a value when prompted
on a menu or option screen.
To tune to channel 15-1, for instance:

1. Press the “1” key, then press the “5” key.
2. Press the “–/-” key.
3. Press the ENTER key.

To go to track 15, for instance:

1. Press the “1” key, then press the “5” key.
2. Press the ENTER key.

TV Menu Operation
Press the MENU key to access the menu list and then
press the RIGHT arrow key to enter the list. Press the
CH /CH arrow keys to browse menu options; press
the VOL /VOL arrow keys to adjust the selected menu
change.
To exit the menu, press the MENU key to back out of all
menu options. Press OK [4] to confirm the selection.
Press the MUTE [2] key to disable sound output
completely. Press the MUTE key again to restore
sound output.

Channel

1. Air/Cable: Set to Air if you are using an antenna like the ones provided to receive
   over-the-air TV broadcasts. Set to cable if you are connecting to a Cable TV system.signal and saves them to the channel list. Note: use this

2. Auto Scan feature whenever you move the TV to a different geographic location.

3. Favorite: Add channels to the Favorites list. Press / and / to browsethe channellist, then press ENTERto mark/unmark a channel as a Favorite.

4. Show/Hide: Choose whether a channel will be select- able when tuning with the CH+/CH- keys. Press / and / to browse the channel list, then press ENTER to mark/unmark a channel as hidden.You can still tune to a hidden channel directly with the numeric keypad.

5. Software Update (USB): Used to perform software updates via USB.

6. DTV Signal: Displays the signal quality of the cur- rent channel.

Picture

1. Picture mode: Select a picture preset that looks
   best (Standard, Soft, user, and Dynamic).

2. Color Temperature: Press “OK” then the Left/Right
   arrow keys to adjust color to Warm, User or Cold.

3. Aspect Ratio: Adjust the screen width by pressing
   “OK” then UP/DOWN arrows to select Auto, 4:3, 16:9,
   Zoom1, Zoom2 and Panorma.

4. Noise Reduction: Press “OK” then the Up/Down
   arrow keys to select, “close, low, middle, or high.”

Sound

1. Sound mode: Set a preset equalizer to match the
   type of program you are watching from; standard,
   music, movie, sports, and user setting.

2. Balance: Press “OK” then the Left/Right arrow
   keys to adjust the audio level from -50 to 50.

3. Auto Volume: Press the “OK” key to enter the
   menu and select Open or Close to set Auto Vol.

4. Surround Mode: Press “OK” then the Up/Down
   arrow keys to select, “open or close surround.”

5. Audio Only: Press the “OK” key to enter the menu
   to select, “close the image signal.” Only audio will
   be heard as the image will disappear.

Time

1. Clock: Press the “OK” key to enter the menu then
   the Up/Down to select; then press the Left/Right
   keys to adjust the current date and time.

2. Off Time: Press the “OK” key to enter the menu
   then Left/Right arrow keys to set a day and time
   to auto shut off the TV.

3.  On Time: Press the “OK” key to enter the menu
   then Left/Right arrow keys to set a day and time
   to auto turn on the TV.

4. Sleep Timer: Set a timer. the TV will turn off
   automatically at the end of the timer.

5. Auto Sync: Set the system time to match the time
   carried by the antenna signal (cable or air).This
   option is not adjustable.TheTV must be connected
   to an antenna or cable system for Auto Sync to work.

6. Time Zone: Set the time zone adjustment to match
   your location.

Option

1. OSD Language: Set the display language of the
   onscreen menus.

2. Closed Caption: When closed caption is availabefor a TV program, a synchronized transcript of theprogram can be displayed on screen.

• Select Off to never display the closed caption information.
• Select On to always display the closed caption information.
• Select CC on Mute to only display the closed caption information when MUTE is enabled.

1. Setup Wizard: An on-screen guide that will help
   you get your TV up and running. Set the menu
   language, time zone, DST, and time format. Then,
   it scans all the channels to find all stations within
   broadcast range.

2. Restore Factory Default: Return all options to their
   factory setting

3. TTS (Text to Speech): Converts normal language
   text to speech.

Lock
Use the remote control to enter the default password
(0000)to access the Lock options.
1. Lock System: Enter the default password of (0000)
to access the Lock Options to enable or disable.
2. Set Password: Set a new password. WHen you
change the password, write it down and store it
in a safe place. Resetting the factory options will
not reset the password.

3. Input Block: Completely block the TV mode or the
AV modes.

4. US: Prevent programs from being viewed based on
US TV or MP AA rating  guidelines.
5. Canada: Prevent programs from being viewed
based on Canadian English or French guidelines.

6. Reset RRT: Refresh the Rating Region Table if you

are having problems with the US or Canada rating
guidelines.

7.Unrated: Enable or disable the ability to watch un-
rated program

Multimedia Interface
Make sure your USB drive is in the USB Slot on the TV. From the input Menu, select MEDIA. Press
Enter to access either Photo/Music/Movie/ or Text icon.
Photo Playback
Insert your USB drive in the USB Slot on the TV. Press

Support format as follow:
Multimedia Support file Photo jpg
Music MP3

the Left/Right arrow keys to select Photo and press Enter. Press to start slide show.
Press or to display the previous and next photo. Press return to quit.
Music Playback
Insert your USB drive in the USB Slot on the TV. Press the Left/Right arrow keys to select Music
and press Enter. Press to play music.
Press or to play the previous and next track. Press return to quit.
Movie Playback
Insert your USB drive in the USB Slot on the TV. Press the Left/Right arrow keys to select Movie
and press Enter. Press to play movie.
Press or to display the last chapter and next chapter. Press return to quit.

H.264,HEVC(H.265)FLV,MKV

Specification
Screen type 9” TFT LCD
Screen resolution 800 x 480
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Removable Memory Support
Playable Media Formats
HDTV signal support Input Connections

Output Connections Speaker Output Power Power

Memory CARD USB
MP3, JPEG, MPEG, XVID, AVC, MP4, H.264, HEVC(H.265), FLV, MKV, TXT
ATSC
AV IN Composite audio/video (3.5mm) AV OUT Composite audio/video (3.5mm)
Headphone (3.5 mm)
0.8 W x 2 (1.6 W total)
Rechargeable lithium polymer bat- tery (3.7 V, 2200 mAh)
AC 100-240 V power adapter DC car power cord

CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of this device may void the
authority granted by the FCC to operate the equipment.

WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. For Customer Service, please call +1 877-210-3449.

The SHARPER IMAGE® name and logo are registered trademarks. ©Sharper Image.

All Rights Reserved.

Portable Tv And Digital Multimedia playerManual Optimized

Portable Tv And Digital Multimedia playerManual Original

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>