JBL OR300 Manual
- June 2, 2024
- JBL
Table of Contents
**OR300
**
Quick Start Guide
1. What’s in the box
OR300 Headphones
Carrying case
Warranty card, Warning card, QSG
2. Installation
A. To attach the audio arm
-
Locate the screw on the inside of the strap that is used to attach the OR300 headphone.
-
Place the head of the audio arm into the screw and hold it in place.
-
Insert the audio tool* into the slot of the screw.
-
Turn the audio tool clockwise (to the right) to tighten the screw until it is secure.
*Note: The Audio Tool is a small black tool included in the Oculus Rift accessories box. A flathead screwdriver can also be used instead.
B. How to adjust
-
Adjust by sliding up and down.
-
Adjust by moving the headphone on its axes.
-
Adjust by moving it right and left.
C. To remove the audio arm
-
Insert the audio tool* into the slot of the screw.
-
Turn the audio tool counter clockwise (to the left) to loosen the screw.
- • Driver:40mm dynamic driver
- Impedance:32Ω
- Sensitivity:99dbSPL @1k Hz 1mW
- Frequency response:10-20kHz
JBL OR300 Manual – Optimized PDF
JBL OR300 Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>