JBL GO 2 Manual
- June 2, 2024
- JBL
Table of Contents
User Manuals
JBL HARMAN GO 2 USER MANUAL
Quick start Guide
What’s in the box
Buttons
connection
Bluetooth
- Bluetooth connection
2.Music control
Speakerphone
LED indication
Warning
JBL GO 2 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL GO 2 is waterproof, please remove all
cable connections and tightly close the cap; exposing the JBL GO 2 to liquids
without doing so may result in permanent damage to the speaker. And do not
expose JBL GO 2 to water while charging, as doing so may result in permanent
damage to the speaker or power source. IPX7 waterproof is defined as the
speaker can be immersed in water up to lm for up to 30 minutes.
If the speaker will not be used for a long period of time, please recharge the
battery at least once every 3 months. Battery life will vary due to usage
patterns and environmental conditions.
Quick start Guide
EN
- Bluetooth version: 4.1
- Bluetooth Profile: A2DP v1.2 AVRCP v1.5 HFP v1,5, HSP v1.2
- Transducer: 1 x 40mm
- Rated power: 3.1W RMS
- Frequency response: 180Hz – 20kHz
- Signal-to-noise ratio: 80dB
- Battery type: Lithium-ion polymer (3.7V, 730mAh)
- Battery charge time: 2.5Hours
- Music playing time: SHours
- Bluetooth transmitter power: 0-4dBm
- Bluetooth transmitter frequency range: 2402-2480MHz
- Bluetooth transmitter modulation: GFSIVIX)PSK/8DPSK
- Dimensions: 71.2 x 86.0 x 31.6 (mm
- Weight: 184g
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license. Other trademarks and
trade names are those of their respective owners.
Read More About This Manual & Download PDF:
JBL GO 2 Manual – Optimized PDF
JBL GO 2 Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>