HunterDouglas Architectural RB BASICS Rollers Shades 5 Inch Fascia Skyline Clutch Installation Guide
- September 11, 2024
- HunterDouglas Architectural
Table of Contents
HunterDouglas Architectural RB BASICS Rollers Shades 5 Inch Fascia
Skyline Clutch
Product Information
Specifications:
- Product: RB Basics Roller Shades 5 Fascia – Skyline Clutch | Dual
- Mounting Surface Requirement: Minimum 1 1/4″ height
- Child Safety: Ensure cords are out of children’s reach to prevent strangulation
Product Usage Instructions
- Install the Brackets
- Outside Mount (OB): Secure each bracket with two screws. Ensure all brackets are level.
- Inside Mount (IB): Install each bracket with two screws through the side or top. Ensure brackets are leveled and aligned.
- Install the Shade
- Attach Chain Diverter: Push hooks through the bracket and pull down.
- Attach Top Roller Assembly: Secure the top roller assembly by aligning hooks with slots and gently pulling down on the clutch until locked.
- Pull Chain Through Diverter: Drop the chain through the diverter and pull all of the chain through.
- Attach Bottom Roller Assembly: Secure the bottom roller assembly by aligning hooks with slots and gently pulling down on the clutch until locked.
- Install the Fascia
- Attach Fascia Panels: Mount the short side of the fascia to the top of the bracket, align the hook, and rotate down over the face of the bracket system.
- Attach Bracket Covers: Snap the bracket covers into the fascia bracket.
- Child Safety Reminder: Always keep cords out of children’s reach to prevent accidents. Follow safety guidelines to avoid any risks.
Frequently Asked Questions (FAQ)
-
Q: How do I ensure the proper operation of the shades?
A: Make sure the mounting surface is level, brackets are aligned, and the shades are securely attached as per installation instructions. -
Q: What should I do to prevent cord-related accidents?
A: Keep cords out of children’s reach, do not tie cords together, and ensure cords do not twist or create loops to prevent strangulation hazards.
Important:
Make sure the mounting surface is level. Brackets must be in line and level
for shade to operate properly. Shim brackets if necessary.
INSTALLATION INSTRUCTIONS
Install the Brackets
Outside Mount (OB)
Inside Mount (IB)
- Inside Mount (IB), Install each bracket with two screws either through the side or up through the top. Make sure all brackets are leveled and aligned.
- Outside Mount (OB), Secure each bracket with two screws. Make sure all brackets are level. Minimum 1 1/4” mounting surface height requirement.
Install the Shade
- Attach the Chain Diverter, Push hooks through the bracket, and pull down
- Attach Top Roller Assembly Pin First, Place the spring-loaded pin end into the round hole of the bracket. Once the 2 hooks are through the slots, gently pull down on the clutch until the hooks have locked securely to the bracket. The bottom of the clutch should point straight down.
- Pull Chain Through Diverter, Drop a loop of chain through the diverter and pull all of the chain through
- Attach Bottom Roller Assembly Pin First, Place the spring-loaded pin end into the round hole of the bracket. Once the 2 hooks are through the slots, gently pull down on the clutch until the hooks have locked securely to the bracket. The bottom of the clutch should point straight down.
Install the Fascia
- Attach the Fascia Panels, Flip the fascia so that the short side will mount to the top of the bracket. Align the hook to the bracket and rotate down over the face of the bracket system. Snap into the locking position.
- Attach Bracket Covers, Snap the bracket covers into the fascia
Child Safety
Young children can STRANGLE in cord loops and the loop above the cord stops. They can also wrap cords around their necks and STRANGLE.
- Always keep cords out of children’s reach.
- Move cribs, playpens, and other furniture away from cords. Children can climb furniture to get to cords.
- Do not tie cords together.
- Make sure cords do not twist together and create a loop.
WARNING
Window Blind Cord Strangulation Risk
Window blinds with a damaged or loose tension device or retractable cord that
fails to fully retract pose a strangulation risk to children. To avoid this
potential strangulation risk, consider purchasing cordless products or
products with inaccessible cords.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>