hama 00185868 Malta Wall Clock User Manual
- June 1, 2024
- Hama
Table of Contents
hama 00185868 Malta Wall Clock
Specifications
- Product : Wall Clock Wanduhr
- Model Number: 00 185868
- Origin: Malta
- Languages: GB, D, F, E, NL, S, RUS
- Power Supply: 1.5V, 1 x AA battery Measuring Range for Temperature Measuring Range for Humidity
Operating instruction
Explanation of Warning Symbols and Notes
-
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks. -
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- 1 wall clock with analogue time, temperature and hygrometer display
- 1 AA battery
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not operate the product outside the power limits given in the specifications.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Keep this product, as all electrical products, out of the reach of children!
- Use the item only in moderate climatic conditions
Batteries
Warning – Batteries
- When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Only use batteries that match the specified type. Keep the instructions for the correct choice of batteries included with the operating instructions of devices safe for future reference.
- Before you insert the batteries, clean the battery contacts and the polarity contacts.
- Do not allow children to change batteries without supervision.
- Replace all the batteries in a set at the same time.
- Do not mix old and new batteries or batteries of different types or from different manufacturers.
- Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not burn batteries or heat them up.
- Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
- Remove spent batteries from the product and dispose of them without delay.
- Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
- Ensure that batteries with damaged housings do not come into contact with water.
- Keep batteries out of the reach of children.
Getting Started
Inserting the battery
Remove the safety film if necessary as well as the contact breaker and insert
the batteries with the correct polarity. The clock is ready for operation.
Replacing the battery
- Remove and dispose of any used batteries. Insert the new battery (AA).
- Ensure that the polarity of the battery corresponds to the symbols in the battery compartment
Installation
You can mount the wall clock on a wall using the opening on the back.
Warning – Mounting Note
- Before mounting the clock, ensure that the chosen wall is suitable for the weight to be mounted, and make sure that there are no electrical wires, water, gas or other lines at the installation site on the wall.
- Purchase special fastening materials from specialised dealers.
- Do not mount the product above locations where persons might linger.
Operation
- Once the battery has been inserted properly, the clock will automatically start running.
- Use the setting wheel on the back of the clock to set the time.
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes
Technical Data
CONTACT
- Service & Support
- www.hama.com
- +49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.