macaio NEO STEAM 1000 Professional Fog Machine User Manual
- June 1, 2024
- Macaio
Table of Contents
macaio NEO STEAM 1000 Professional Fog Machine
Specifications
- Model: STEAM 1000
- Type: Professional Fog Machine
- Heater Wattage: 1000 watts
- Control : Manual and DMX
- Features: LCD screen, Compact design
Product Usage Instructions
Continuous Smoke Operation
To start continuous smoking, press the Start/Pause button. Press the same button again to stop smoking. During continuous smoking, use the Up and Down keys to adjust the smoke volume between 5-100.
Timing Smoke Operation
When the machine is READY, press the Up/On button to start timing smoking. The display will show the duration/interval countdown. Press the Down/Off button to stop timing smoking. You can switch to continuous smoking during timing smoking by pressing the Start/Pause button.
DMX Operation
DMX control takes priority over remotes and built-in control. When a valid DMX signal is received, the machine is controlled by the DMX controller. Press Up and Down to adjust the DMX Address. The Start/Pause button serves as a manual smoking switch in the DMX state.
FAQ
- What should I do if the machine displays a fault warning?
- If the machine displays a fault warning such as ‘OVERHEAT !!!’, ‘NO HEATING’, or ‘NO FLUID’, follow the instructions provided in the manual. For example, for ‘NO FLUID’, add fog liquid to the tank and press the Start/Pause button to reset.
OVERVIEW
STEAM 1000
PROFESSIONAL FOG MACHINE
THE STEAM 1000 is a compact fog machine with a robust and modern design. It
has a 1000-watt heater that allows it to start generating fog within three
minutes of turning it on. To facilitate manual control, it has an LCD screen.
It can also be controlled by DMX.
specifications
Effects
- Output: 7000 (ft3/min)
- Consumption: 150 ml/min.
- Tank capacity: 3 liter
Control
- DMX Channels: 1CH
- DMX Modes: 1
- DMX Connectors : 3 pin 3 & 5 PIN XLR
- Primary/Secondary: NO
- On Board Control: Continuous fogging /Timing fogging
- Stand Alone: YES
- Display: LCD
- First Warm Up Time: 335s
- Max Continuous Output Duration: 28s
- No or Low Fluid Warning: NO
- Other Warnings: Overheat & No heating Warning
- Operate with exterior controller: YES
- Remote controller connectors: 1/4” JACK
- Manual fogging: YES
- Self-clean Function: NO
Power
- Input/Variable/Switchable: 230V or 240V
- Hz: 50 or 60Hz
- Heater Power Storage: 1000W
- Consumption: 1020W
- Fuse or No Fuse breaker: NFB10A (230V)
- Cable / Plug Type: HO3VV-F3G,0.75 m2 + powerCON
- Approvals: ETL,CE, FDA, etc.
Fixture
- IP Rating: N/A
- Cooling: fan, air, cool, etc.
- Max Ambient Temperature (Ta): 40°C
- Surface Temperature of the body (Tc): 60°C
- Hanging Bracket: YES
- Handle: NO
- Tank: 3L
- LED under Tank: NO
Dimensions
- Size (LxWxH): 339×29 – 5x338mm
- Weight: 7kg
Accessories (Included)
- Controller: NOC
- (Long press Up/Down button to change the value continuously and fast.
- Set values are automatically saved.
CONTINUOUS SMOKE OPERATION
Press the “Start/Pause” button to start continuous smoking, and then press the “Start/Pause” button again to stop smoking.
During continuous smoking, the icon content is displayed. At this time, can also press the Up and Down keys to continuously adjust the smok ve volume (5-100).
TIMING SMOKE OPERATION
When the machine is “READY”, press the “Up/On” button to start timing smoking.
- The picture on the right shows the timing smoking start, with the D and I numbers jumping in turn, displaying the duration/interval countdown. Press the “Down / Off” button to stop timing smoking.
- Pressing the “Start/Pause” button during timing smoking can also activate continuous smoking, the icon content is displayed. Press the “Start/Pause” button again to stop continuous smoking and return to the timing smoking state.
DMX OPERATION
The DMX c ontrol takes priority over the remotes and built-in control. When the machine r eceives a valid DMX signal, it is controlled by the DMX controller and ignores the remotes and built-in control, the icon screen is displayed
V represents the smoke volume controlled by DMX. In this state, you can still press the Up and Down to adjust the DMX Address.
DMX CHART
In the DMX state, the “Start/Pause” button serves as a manual smoking switch and pressing and holding this button sprays smoke at the maximum output; After releasing the “Start/Pause” button, stop manual smoking and return to the control state of the DMX
FAULT WARNING
Flashing to display the following warning icons
- Indicates that the heater temperature is too high or the temperature sensing wire is disconnected.
- Indicators that the machine cannot heat up.
- Indicators that the fog liquid is used up or cannot be extracted. Add f og liquid to the tank and press the “Start/Pause” button to reset
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>