KYOCERA MA2000W Multifunctional Monochrome Laser Printer User Guide

June 3, 2024
Kyocera

KYOCERA MA2000W Multifunctional Monochrome Laser Printer User Guide

Before setting up printer you first must, download the Mac Driver from Kyocera.info and run the installer. This will install all software required.

Installations

Step 1
If your router supports WPS, you can configure network connection using the WPS push button on your router. Check your router manual to WPS support.

  1. Turn on the computer.

  2. Press Wireless Network on the operation panel of the machine. The wireless network indicator flashes.

  3. Press the WPS button on the router.
    Installations

  4. The network between this machine and the router is being configured. If the network connection between this machine and the router completes, Wireless Network will light up.

  5. Print a Status page.

    • Press and hold the Mode Select key for 3 seconds.
    • The attention light will start flashing and status page will be printed.
      Installations

Step 2

  1. Select the Apple icon and then System Preferences

  2. Select Printers and scanners

  3. Select the “+” to add a new printer.

  4. Select the center tab (IP) enter the IP address listed on the status page printed from Step 1. Select LPD. Select drop down next to “Use” press Select Software.

  5. Scroll to printer and select ok.

  6. Press Add

Support

  1. To Register your Product, go to:
    https://www.kyoceradocumentsolutions.us/en/support/register

  2. For additional Information, please go to the URL for the Product Support Page.
    www.kyoceradocumentsolutions.us/en/products/mfp/MA2000W
    https://www.kyoceradocumentsolutions.us/en/products/printers/P2000W

  3. Speak to a Technical Representative Call 1-800-255-6482

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals