BOYO VTC73AHD 7 Monitor and Heavy Duty AHD Camera User Manual

: June 1, 2024
: BOYO

BOYO VTC73AHD 7 Monitor and Heavy Duty AHD Camera User Manual

Please read the instructional complete before use and keep it for future reference.

Product Features

7” 1080P AHD Monitoring Systems
Monitor
- 7” TFT LCD monitor
- 1280 x 960 high-resolution 16:9 wide-screen format
- 2 Channel AHD inputs
- Compatible with 720P, 960P and 1080P Video
Camera
- Rugged Design for Commercial Vehicle Use
- High Resolution: 1280 x 960 effective pixels
- Video Streaming: 1080P @ 25fps
- 2.8mm Lens with Built-in IR Cut Filter
- Waterproofed (IP68 Rating)

Before Installation

Please check contents.
Perform bench test. Ensure the product is working before installation by connecting a camera and a monitor to 12VDC.
Perform pre-install test, before mounting the monitor and the camera. In very rare instances, a running engine causes interference, resulting in image freezing and jerky object movements. In such situation, the monitor and the camera need to be moved and positioned at various places to determine the best performance position

Wiring & Pin configuration

Instruction

Camera connector pin-out – need to be considered when adding a second camera
Instruction

Monitor Assembly

Operation

Buttons

1.| | Power|
---|---|---|---
2.| | MODE| Switch AHD1 / AHD2
3.| | Increase|
4.| | MENU| Enter menu
5.| | Decrease|
6.| | Brightness Mode| User, Day, Night 1, Night 2, Night 3
7.| | Rotating| Flip display
8.| | Remote Sensor|

Button Operation

1.		Enter / Exit menuScroll through ‘IMAGE’, ‘VOICE’,’SYSTEM’ and ‘FUNCTION’
2.		Enter settings
3.		Move to the next setting
4.
Change value: increase or decrease

IMAGE menu

Display

settings

Brightness
Contrast,
Saturation
RESET :the monitor to the factory default settings.

VOICE menu

VOLUMN :change speaker volume

SYSTEM menu

LANGUAGE change the user language
SLEEP screen saver mode when there is no video signal
ACC-TIME
FLIPS flip display horizontally and vertically

FUNCTION menu

GUIDELINES
ON the guideline is displayed when triggered
OFF do not display guidelines

Camera & Monitor Specifications

Camera

Image Sensors: 1/2.7″
Power supply : DC 12 V
Resolution : 1280×960 ( 1080P)
Video input format:1080P HD 25fps Ntsc
Lux:0.01 LUX,0LUX IR On(18 IR)
Lens:2.8MM
ICR IR Cut Filter Built-in
System:Ntsc
View angle:120 Degree
Ip Rating:IP67,IP68
Operating Temperature(°F):-4-167
Storage Temperature(°F):-22-185

Monitor

7″ TFT LCD Panel (diagonal length)
Resolutions:1280×960(RGB)
Aspect Ratio: 16:9 image
2 Ways Channel AHO Inputs
Video input format:720P & 960P & 1080P HD 25/30 fps NTSC
With guide lines
Rear view delay (0-1 SS selection)
AHD1/AHD2 Mirror Image adjusted independently
PAL/NTSC auto-switching
Power supply: DC 12V-24V
Removable sunshade
Built-in Speaker
Remote control,OSD menu
Adjustable contrast,color and brightness

WARRANTY INFORMATION

This one-year limited warranty is given to the end-user or the retail purchaser (referred to this warranty as “Original Purchaser”) that it will be free from defects in material and workmanship for a period of one year from the date of the purchase of the new product (excluding accessory items such as power cords, cradle, memory card, adaptor, and cables). This limited warranty does not cover any physical damage to, or misuse of, this product, damage caused by improper installation; improper use; misuse; neglect; repair of cracked, scratched, broken or modified cosmetics; or parts that have been altered or removed; damages done by another device used with this product resulting from use of non BOYO®- brand parts

For warranty information: https://[www.visiontechamerica.com](http://www.visiontechamerica.com)/get- warranty
For technical support: Call: 888-941-3060
Email: [email protected]
Visit: www.VisionTechAmerica.com

Before operating the Monitor, please read this manual thoroughly and retain it for future reference.

MONITOR SPARE PARTS

Product Parts

SPECIFICATIONS

” TFT LCD Panel (diagonal length)
esolutions: 1280×960 (RGB)
Aspect Ratio: 16:9 image
2 Ways Channel AHD Inputs
Video input format: 720P & 960P & 1080P HD 25/30 fps NTSC
With guide lines
Rear view delay (0~15S selection)
AHD1/AHD2 Mirror Image adjusted independently
PAL/NTSC auto-switching
Power supply : DC 12V-24V
Removable sunshade
Built-in Speaker
Remote control, OSD menu
Adjustable contrast, color and brightness

CONNECTION

Product Parts

MONITOR

Power
2.AHD1/AHD Switch
Increase setting
Menu
Decrease setting
Brightness mode
Rotating
Remote window

REMOTE CONTROL

Power
AHD1/AHD2 Switch
Increase Setting
Menu
Decrease Setting
Mode selection

CAMERA

SPECIFICATIONS

AHD Camera
Image Sensors: 1/2.7″
Power supply: DC 12 V
Resolution: 1280×960 (1080P)
Video input format: 1080P HD 25fps Ntsc
Lux:0.01LUX , 0LUX IR On (18 IR)
Lens: 2.8MM
ICR IR Cut Filter Built -in System:Ntsc
View angle: 120 Degree
Ip Rating: IP67, IP68
Operating Temperature ( °F):-4~167
Storage Temperature (°F):- 22~185

PACKAGING LIST

SN	NAMES	QUANTITY
1	AHD Monitor	1
2	Remote controller	1
3	User’s Manual	1
4	Power Cable	1
5	Sun shade	1
6	Screw	4
7	U-bracket	1
8	Stand (Optional)	1
9	AHD camera	1
10	Camera AccessoriesRelevant accessory counts including its screws.	1

1 YEAR LIMITED WARRANTY

This limited warranty is given to the end-user or the retail purchaser (referred to this warranty as “Original Purchaser”) that it will be free from defects in mate- rial and workmanship for a period of one year from the date of the purchase of the new product (excluding accessory items such as power cords, cradle, memory card, adaptor and cables) . A copy of the original proof of purchase and this warranty card with RMA number given by Vision Tech America, Inc . is required to receive warranty service. In the unlikely event that the new product should fail due to defect in material or workmanship, Vision Tech America, Inc . will repair or replace with new or refurbished product, where each party will be responsible for one-way shipping for the lower 48 states customers only . For International and U.S customers residing in Hawaii , Alaska and Puerto Rico, customer is responsible for freight charges incurred both ways. This limited warranty does not cover any physical damage to this product, damage caused by improper installation; improper use; misuse; neglect; repair of cracked, scratched, broken or modified cosmetics; or parts that have been altered or removed; damages done by another device used with this product resulting from use of non BOYO®- brand parts. This warranty is VOID if you purchased this product as used, floor model sample, or refurbished ; if the product has been altered or modi- fied in any way (including but not limited to attempted repair without authoriza- tion from BOYO~- Vision Tech America, Inc . and/or alteration/removal of the serial number). This limited warranty does not cover the vehicle of any damages or liabilities in which this product is installed or being installed . This product does not guarantee avoidance of vehicle collision or accident. If you are having trouble with the product, please contact our technical support at 888-941-300S or email: info@visiontechamerica .com with your questions or comments. If your product is eligible to receive warranty, request for warranty service online by visiting http ://visiontechamerica .com/site/get-warranty/
This warranty is invalid if the factory applied serial number has been altered or removed from the Product.
IMPORTANT : TO SEND DEFECTIVE PRODUCT FOR WARRANTY SERVICE, YOU MUST RECEIVE RMA (RETURN MATERIAL AUTHORIZATION) AND INCLUDE ORIGINAL PROOF OF PURCHASE AND THIS WARRANTY CARD WITH THE SHIPMENT .
VISION TECH AMERICA CUSTOMER SERVICE CENTER
888-941 -300S or visit www.visiontechamerica .com
For an accessory or part not available from your authorized dealer, call For U.S. 888-941-300S I International 714-446-&543