BOYO VTX400D AHD Wireless Transmitter and Receiver User Manual
- June 3, 2024
- BOYO
Table of Contents
BOYO VTX400D AHD Wireless Transmitter and Receiver
Please read the instructional complete before use and keep it for future reference.
Product Features
- 2.4GHz Wireless Transmitter and Receiver Module
- Turns any camera and 1080P AHD monitor into a wireless system
- Transmitter support all AHD/CVI/TVI/CVBS cameras at 1080P/720P/D1/CIF resolutions and NTSC/PAL compatible
- Receiver support 1080P AHD monitor
- Sturdy design for commercial vehicle applications. IP68 Rated
- Reliable wireless operational range up to 1640ft
- Easy one-button pairing
Content
Before Installation
- Please check the contents.
- Perform bench test. Ensure the product is working before installation by connecting a camera + TX and a monitor + RX to 12VDC.
- Perform a pre-install test, before mounting the monitor and the camera. In very rare instances, a running engine causes interference, resulting in image freezing and jerky object movements. In such a situation, the monitor and the camera need to be moved and positioned at various places to determine the best performance position.
Operation
VTX400D is a plug-n-play solution. No settings required.
Pairing:
If you see, “LOST LINK”, the TX and RX modules needs to be paired to restore
the link. The TX and RX are paired from the factory and the system should work
when power is connected to TX and RX.
IF “LOST LINK” is displayed on the monitor,
- Check if power is connected to TX module. If power is connected to TX, a red light should be on.
- If the red light is on, need to power.
- Pairing:
Press buttons on both modules until red lights are flashing on both modules. When the connection is made, green lights come on the modules and the camera will be displayed on the module.
TX, RX and Wireless Specifications
| TX | RX | |
|---|---|---|
| Video Compatibility | AHD/TVI/CVI/CVBS 1080P/720P/D1/CIF |
NTSC/PAL
| 1080P AHD
Video Connector| RCA (F)| RCA (F)
Operating Voltage| DC12V ~ DC24V
Current Consumption| 140mA (Typical) @ 12V
Storage temperature| -30℃ ~ 80℃
Working temperature| -20℃ ~ 70℃
Operating Humidity| 85% RH
Wireless Specification
Operating frequency| 2.4GHz~2.4835GHz
Output Power| 24±1dBm Max. Power Setting
Modulation Type| 16QAM/QPSK/BPSK
RX Sensitivity| 78dBm(Typ.)@12MHz,16QAM BER<1E-3
86dBm(Typ.)@12MHz QPSK BER<1E-3
RF Bit Rate| 4MHz BER<1E-3
Spread Spectrum| FHSS (Adaptive frequency hopping)
Operating Distance| Up To 1650ft (Open Line of Sight)
WARRANTY INFORMATION
This one-year limited warranty is given to the end-user or the retail
purchaser (referred to this warranty as “Original Purchaser”) that it will be
free from defects in material and workmanship for a period of one year from
the date of the purchase of the new product (excluding accessory items such as
power cords, cradle, memory card, adaptor, and cables). This limited warranty
does not cover any physical damage to, or misuse of, this product, damage
caused by improper installation; improper use; misuse; neglect; repair of
cracked, scratched, broken or modified cosmetics; or parts that have been
altered or removed; damages done by another device used with this product
resulting from use of non BOYO®- brand parts. This warranty is VOID if you
purchased this product as used, floor model sample, or refurbished; if the
product has been altered or modified in any way (including but not limited to
attempted repair without authorization from BOYO®- Vision Tech America, Inc.
and/or alteration/removal of the serial number).
For warranty information: https://www.visiontechamerica.com/get-warranty
For technical support: Call:
888-941-3060
Email: info@visiontechamerica.com
Visit: www.VisionTechAmerica.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>