Vari-Lite VL600 Acclaim CYC Full Color RGBL LED Cyclorama Fixture User Manual

Vari-Lite VL600 Acclaim CYC Full Color RGBL LED Cyclorama Fixture

Product Information

• Product Name: VL600 ACCLAIM CYC
• Manufacturer: Vari-Lite
• Model: VL600 ACCLAIM CYC
• Website: www.vari-lite.com

Specifications

• Maximum Height: 3.7m (12 ft)
• Power Source: AC
• Manufacturer’s Warranty: Refer to warranty documentation

Product Usage Instructions

Safety Warnings and Notices
Read the user manual completely before attempting to install, operate, or maintain the fixture. Only qualified personnel should perform the installation and operation of the fixture. Follow all safety instructions provided.

Caution Against Direct Sunlight Through Front Lens Assembly
The front lens assembly in Vari-Lite LLC luminaires is designed to focus light energy efficiently. Avoid direct sunlight through the front lens assembly to prevent damage.

Caution Against Powering Luminaires from Dimmer Circuits
Avoid powering any Vari-Lite LLC luminaire from a dimmer circuit, even in ‘NONDIM’ mode. Dimmer and non-dim modules are not suitable power sources and can lead to power issues, misoperation, and failure of the luminaire.

FAQ

• Q: Where can I find additional product documentation?
  A: Additional product documentation, including DMX maps, software, and photometric reports, can be downloaded from the manufacturer’s website.

• Q: What should I do if I encounter power problems with the luminaire?
  A: If you experience power problems, immediately disconnect the luminaire from the power source and contact technical support for assistance.

INTRODUCTION

OUR GOAL
We are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Vari-Lite customer.

• TECHNICAL SUPPORT
  Our Service and Support team is tasked with online and field support, repair, demo, commissioning, mainte-nance contracts, and technical training for fixtures and systems. In addition, this team plays a large role in Systems sales, responsible for administering final commissioning, record-keeping, and organizing services. Refer to the back cover of this User Manual for contacts in your region or visit www.vari-lite.com/support

• CUSTOMER SERVICE
  Customer Service is responsible for boxed goods and spare parts quotations, order entry and fulfilment, project delivery, lead times, and general account management. They also manage all after-sales warranty fulfilment, RGA, and repairs invoicing in tandem with our After Sales Service & Support team. Visit our website to find a customer service agent in your region.

• ADDITIONAL DOCUMENTATION
  Additional product documentation, including DMX maps, software, and photometric reports, are available for download on our website.
  For more information on installing DMX512 control systems, the following publication is available for purchase from the United States Institute for Theatre Technology (USITT), “Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition” (ISBN: 9780955703522).
  USITT Contact Information:

  • USITT
    315 South Crouse Avenue, Suite 200 Syracuse, New York 13210-1844

  • USA Phone: 800-938-7488 or +1-315-463-6463

  • Fax: 866-398-7488 or +1-315-463-6525

  • Website: www.usitt.org

ABOUT THIS DOCUMENT
Read all instructions before installing or using this product. Retain this User Manual for future reference. Additional product information and descriptions may be found on the product data sheet(s) which can be downloaded from the VariLite website at www.vari-lite.com. This User Manual provides necessary information regarding safety, installation, operation and routine mainte-nance for VL600 Acclaim Cyc. Familiarizing yourself with this information will help you to get the most out of your product.
WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.

SAFETY WARNINGS AND NOTICES

Read this user manual in full before attempting to install, operate or maintain the fixture to which it relates. This user manual is intended to provide general guidance to such suitably qualified personnel. Installation and opera-tion of the fixture are to be performed by qualified personnel only. When using electrical equipment, basic safety precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

• For indoor, dry location use only. Do not use outdoors unless fixture is suitably IP-rated.
• Use safety tether when mounting.
• Equipment should be mounted in locations and at heights where it will not be readily subjected to tampering by unauthorized personnel.
• Not for residential use. Do not use this equipment for other than intended use.
• Note distance requirement(s) from combustible materials or illuminated objects. Do not mount near gas or electric heaters.
• Install only in locations with adequate ventilation. Ensure sure that ventilation slots are not blocked.
• Ensure that the voltage and frequency of the power supply match the power requirements of the fixture.
• The fixture must be earthed/grounded to the appropriate conductor.
• Do not operate fixture outside the specified ambient temperature range.
• Do not connect the fixture to any dimmer pack.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition and void warranty.
• Refer service to qualified personnel. This fixture contains no user-serviceable parts.
• Prior to first use, carefully inspect fixture to ensure no damage has occurred during shipping.
• Materials used in the manufacturing process can cause strong odors when the product is new. These odors dissipate over time.
• Prior to each use, carefully inspect power cables and replace any damaged cables.
• Exterior surfaces of the luminaire will be hot during operation. Take appropriate precautions.
• Continuous use of the fixture may shorten the lifespan. Power down the fixture when not in use.
• Do not cycle power on and off repeatedly. Disconnect mains power if the fixture is not used for an extended period.
• Clean fixtures regularly, particularly when working in a dusty environment.
• Never touch power cables or wires while the fixture is powered on.
• Avoid entangling power wires with other cables.
• In the event of a serious operating problem, immediately discontinue using the fixture.
• It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example, by cracks or deep scratches.
• Original packing materials can be reused for transporting the fixture.
• Do not look directly at the LED light beam while the fixture is on.
• This is a Class A product. In a domestic environment this product may cause radio interference, in which case, the user may be required to take adequate measures.
• The light source contained in this luminaire shall only be replaced by the manufacturer or service agent or similarly qualified person.

SAVE THESE INSTRUCTIONS.

WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to use proper cable can result in damage to equipment or danger to personnel. Caution Against Direct Sunlight Through Front Lens Assembly

• CAUTION AGAINST DIRECT SUNLIGHT THROUGH FRONT LENS ASSEMBLY
  The design and nature of the front lens assembly in Vari-Lite LLC luminaires is to efficiently focus the light energy from the luminaire’s lamp for maximum light output.

  • When the front lens assembly is exposed to direct sunlight or intense light from neighbouring fixtures, the lens will collect and intensify this light and focus it back into the fixture. Intense sunlight or beams from other fixtures can cause damage to internal assemblies contained within the fixture.
  • When fixture is not in use and direct sunlight or other intense light is present, position luminaires so their front lens assembly it not directly exposed to the light source.

• CAUTION AGAINST POWERING LUMINAIRES FROM DIMMER CIRCUITS
  It is not recommended to power any Vari-Lite LLC luminaire from a dimmer – even in ‘NONDIM’ mode. Dimmer and non-dim modules are not suitable sources of power because their output modifies the AC waveform. This may work for a short time, but eventually results in power problems, luminaire misoperation and/or failure.

  • When using a power distribution rack, do not use dimmer or non-dim modules to power any Vari-Lite LLC luminaire. Damage to the luminaire can occur.
  • Using a dimmer or non-dim module to power your Vari-Lite LLC luminaire will void your luminaire’s warranty.

• CAUTION AGAINST THE USE OF THIRD-PARTY PARTS OR ACCESSORIES

  • Heat and heat distribution are important factors when operating Vari-Lite LLC luminaires. Vari-Lite LLC luminaires are designed to dissipate heat efficiently and safely. Any blockages or obstructions, such
    as aftermarket baffles, covers, enclosures, etc. can interrupt the luminaire’s ability to dissipate heat properly and can damage the luminaire.

  • Vari-Lite LLC cannot be responsible for issues arising from non-approved parts and accessories installed on or used with any Vari-Lite LLC product. Customers of such products should contact the manufacturer directly for assistance and support.

TRANSPORTING LUMINAIRES
When shipping or transporting luminaires, Vari-Lite LLC recommends that the luminaire(s) be sufficiently protected against any (including, but not limited to) shock, vibration, drops, jarring, exposure to the environment, etc.
Failure to sufficiently protect any Vari-Lite LLC luminaire during shipping or transportation will result in damage and void the luminaire’s warranty. Vari- Lite LLC will not be responsible for any shipping damage or breakage of any product under any circumstances. Vari-Lite LLC will not be responsible for any third-party case manufacturer’s cases.
NOTE: As with all automated luminaires, proper handling and suitable protective shipping cases should be used when transporting fixtures to reduce the risk of damage.
TRANSPORTATION AND SHIPPING CASE REQUIREMENTS
Cases to transport Vari-Lite LLC luminaires should meet the following loading requirements:

• Luminaire head, yoke, and enclosure sub-assemblies shall be equally supported and constrained where no one sub-assembly (head, yoke, or enclosure) fully supports the entire mass of the luminaire.
• The interior of the case shall be of high-quality and uniform-density foam. The foam shall be of the same type and density throughout as to equally and uniformly support loading at every contact surface.
• The case shall, when laid on any of its six (6) surfaces, maintain the loading requirements outlined above.
• All cases not meeting the aforementioned loading requirements, with wheels, shall have markings on the exterior of the case that the unit is to be transported on it wheels only (e.g. “Case must be transported and remain [at all times] on its wheels”).

COMPLIANCE NOTICE

• FCC DECLARATION OF CONFORMITY
  This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Vari-Lite system, service, and safety guidelines, may cause harmful interference to radio communications.
  As tested under this standard:

  • FCC 47CFR 15B clA*CEI
    Issued: 2009/10/01 Title 47 CFR Part 15 Subpart B Unintentional Radiators Class A Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

• EU DECLARATION OF CONFORMITY
  We, Vari-Lite LLC., 10911 Petal Street, Dallas, Texas 75238, declare under our responsibility for the products contained herein are in conformity with the essential requirements of the following European Directives and harmonized standards:
  Low Voltage Director (LVD), 2006/95/EC
  EN 60589-2-17:1984+A1:1987+A2:1990 used in conjunction with 60598-1:2008/A11:2009
  Electromagnetic Compatibility Directive (EMC), 2004//108/EC
  EN 55022:2010, EN55024:2010

HOW TO OBTAIN WARRANTY SERVICE
A copy of the Limited Warranty card was included in the shipping package for this product. To obtain warranty service, please contact customer service at 1-214-647-7880, or entertainment.service@signify.com and request a Return Material Authorization (RMA) for warranty service. You will need to provide the model and serial number of the item being returned, a description of the problem or failure and the name of the registered user or organization. If available, you should have your sales invoice to establish the date of sale as the beginning of the warranty period. Once you obtain the RMA, pack the unit in a secure shipping container or in its original packing box. Be sure to clearly indicate the RMA number on all packing lists, correspondence, and shipping labels. If available, please include a copy of your invoice (as proof of purchase) in the shipping container.

With the RMA number written legibly on or near the shipping address label, return the unit, freight prepaid, to:

• Vari-Lite LLC
• Attention: Warranty Service (RMA# ____) 10911 Petal Street
• Dallas, Texas 75238
• USA

As stated in the warranty, it is required that the shipment be insured and FOB our service center.

IMPORTANT! When returning products to Vari-Lite for repairs (warranty or out-of-warranty) from a country other than the USA, “Vari-Lite LLC”, must appear in the address block as the Importer of Record (IOR) on all shipping documentation, Commercial Invoices, etc. This must be done in order to clear customs in a timely manner and prevent returns.

DESCRIPTION

FEATURES

• Delivers the performance of a 500 W cyclight with a maximum power consumption of 145 W with a smooth even field for cycloramas up to 5m / 16ft high.
• Simple spacing system 1.2m – 4ft from cyc surface 1.4m / 4.5ft on center spacing.
• Designed for top or floor mounting with kick stand yoke.
• Infinite color choice from the RGBL engine and color temperatures in white.
• Homogenized fully mixed color output light, no multiple color shadows.
• Constant color balance down to very low light levels irrespective of intensity setting.
• True asymmetrical patented reflector technology.
• RDM controls and setup of fixture allows device settings to be configured remotely.
• Color Calibration.
• Multiple fan/noise control modes and options.
• Fresnel, Profile Light engine and Zoomspot available

For detailed product information, please refer to the Product Guide at https://www.vari-lite.com/global/products/acclaim-led-cyc.

COMPONENTS

The document provides installation and operation instructions for the following products:

• VL600 Acclaim Cyc

Read all instructions before installing or using this product. Retain this manual for future reference. Additional product information and descriptions may be found on the product specification sheet.

INCLUDED ITEMS
Each VL600 Acclaim Cyc luminaire includes the following items:

• VL600 Acclaim Cyc
• Quick Start Guide

INSTALLATION

MOUNTING
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. When installing the fixture, always use a safety cable that is certified to hold up to 12 times the fixture’s own weight.
The luminaire must be installed by qualified professionals.

CONNECTING DATA AND POWER

• A maximum of 32 luminaires may be connected in any one DMX data link.
• A maximum of 9 luminaires may be connected in 120V, 60Hz.
• A maximum of 16 luminaires may be connected in 230V, 50Hz.

NOTE: This maximum limit applies to the luminaire “daisy chain” only. Your system or console may require fewer luminaires on a single data link path. Consult your console documentation for more information.

To connect power and data:

• Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
• Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN connectors of remaining luminaires in link.
• Step 3. At last luminaire in link, install male termination connector at DATA THRU connector. (Luminaires and other devices on the same DMX chain may not function properly without termination.)
• Step 4. Connect AC Input Cable connector to power input source.
• Step 5. Dress AC input and data cables and secure them so that they will not interfere with luminaire head and yoke movement.

MENU OPERATION

CONTROL PANEL
Press the MENU button to select any functions, until the required function is shown in the display. Select the desired function by pressing ENTER, which will cause the display to blink. Use the UP and DOWN button to change the mode. Once the required mode has been selected, press the ENTER button to accept the selection. Press MENU to return to the previous menu or let the unit idle for one minute to exit menu mode automatically.

QUICK REFERENCE MENU KEY SHORTCUTS

• DMX MENU

  • Address
    To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the address from 001 to 512, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • DMX Mode
    To select DMX Mode, press the ENTER button to confirm. Use the UP/DOWN button to select 8 – Bit or 16 – Bit, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Data
    To select Data, press the ENTER button to confirm. Use the UP/DOWN button to select Ch1 – Intensity xxx(value), Ch2 – Intensity Fine xxx(Value), …. All functions, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Dmx Fail
    To select Dmx Fail, press the ENTER button to confirm. Use the UP/DOWN button to select DMX Hold or Blackout, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

• MANUAL MENU
  To select Manual, press the ENTER button to confirm, use the UP/DOWN button to select Red, Green, Blue and Lime. Use the UP/DOWN button to adjust the value from 0 to 255, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

• SETTINGS MENU
  To select Settings, press the ENTER button to confirm, use the UP/DOWN button to select LED, Display On Time and Reset Defaults.

• LED
  To select LED, press the ENTER button to confirm. Use the UP/DOWN button to select Dimming Curve, Output Mode, Color Calibration, Fan Mode and Refresh Rate. Press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Dimming Curve — To select Dimming Curve, press the ENTER button to confirm. Use the UP/DOWN button to select Square Law, S Curve or Linear, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Output Mode — To select Output Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Standard, Studio or Whisper, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Color Calibration — To select Color Calibration, press the ENTER button to confirm. Use the UP/DOWN button to select On or Off, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Fan Mode — To select Fan Mode, press the ENTER button to confirm. Use the UP/DOWN button to select On or Auto, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Refresh Rate — To select Refresh Rate, press the ENTER button to confirm. Use the UP/DOWN button to select 500Hz, 1000Hz, 1500Hz, 2000Hz, 2500Hz, 3000Hz, 3500Hz, 4000Hz, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Display On Time
    To select Display On Time, press the ENTER button to confirm. Use the UP/DOWN button to select Auto(30 seconds since last press) or On, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Reset Defaults
    To select Reset Defaults, press the ENTER button to confirm, Are You Sure? will show on the display, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

• SERVICE MENU
  To select Service, press the ENTER button to confirm, use the UP/DOWN button to select Status, Diagnostics, Version, Fixture Hours, Crossload(Software) and Password(2606).

  • Status
    To select Status, press the ENTER button to confirm, No Errors or a list of errors will show on the display, press the MENU button back to exit.

  • Diagnostics
    To select Diagnostics, press the ENTER button to confirm. Use the UP/DOWN button to select Fan Check or Temp, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Version
    To select Version, press the ENTER button to confirm, Version will show on the display, press the MENU button back to exit.

  • Fixture Hours
    To select Fixture Hours, press the ENTER button to confirm, Fixture Hours will show on the display, press the MENU button back to exit.

  • Crossload(Software)
    Select Crossload(Software), press the ENTER button to confirm, Are You Sure? will show on the display, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
    NOTE: Incoming DMX must be removed from the fixture or software crossload will not be activated.

  • Password(2606)
    Select Password(2606), press the ENTER button to confirm. Use the UP/DOWN button to select White Balance or Change Mode, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • White Balance — To select White Balance, press the ENTER button to confirm. Use the UP/DOWN button to select Red, Green, Blue, Lime or Reset to Defaults (Reset to White Balance), press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

  • Change Mode — To select Change Mode, press the ENTER button to confirm. Use the UP/DOWN button to select ZOOMSPOTM, PLE, Fresnel or CYC, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DMX MAPPING

The fixture can be operated by DMX controller. The following tables assumes a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence.

TABLE 1. 8-BIT MODE

TABLE 2. 16-BIT MODE

0

| 0-255| Intensity (Dimmer) control channel
2| Intensity (low)| 0-65535

3

| ****

strobe

| ****

0

| 0

1-255

| Open strobe speed slow>>>>>>>>>>>>>>>>>>>Fast
4| red (High)| 255| 0-255| red leD output level
5| red (low)| 65535| 0-65535
6| Green (High)| 255| 0-255| Green leD output level
7| Green (low)| 65535| 0-65535
8| Blue (High)| 255| 0-255| Blue leD output level
9| Blue (low)| 65535| 0-65535
10| lime (High)| 255| 0-255| lime leD output level
11| lime (low)| 65535| 0-65535
COLOR PRESET

R| G| B| L| CCT TARGET| CRI (RA)
255| 0| 16| 255| 2700K| 85.5
255| 10| 52| 255| 3200K| 83.6
255| 68| 89| 255| 4500K| 85.9
255| 88| 141| 255| 5600K| 85
184| 157| 197| 242| 6500K| 85.9
165| 223| 243| 247| 7000K| 84.6
255| 255| 255| 255| 7103K| 85.6

RDM PARAMETER IDS

The following tables outline and describe all the RDM parameters IDs associated with the Acclaim LED Cyc luminaire.

Category – network Management
 |  | DIsC_UnIQUe_BranCH| 0x0001|  | X| X|
 |  | DIsC_MUTe| 0x0002|  | X| X|
 |  | DIsC_Un_MUTe| 0x0003|  | X| X|
X|  | PrOXIeD_DeVICes| 0x0010|  |  |  |
X|  | PrOXIeD_DeVICes_COUnT| 0x0011|  |  |  |
X| X| COMMs_sTaTUs| 0x0015|  |  |  |
Category – status Collection
X|  | QUeUeD_MessaGe| 0x0020|  |  |  |
X|  | sTaTUs_MessaGes| 0x0030|  |  | X| status
X|  | sTaTUs_ID_DesCrIPTIOn| 0x0031|  |  | X|
 | X| Clear_sTaTUs_ID| 0x0032|  |  |  |
X| X| sUB_DeVICesTaTUs rePOrT_THresHOlD| 0x0033|  |  |  |
Category – rDM Information
X|  | sUPPOrTeD_ParaMeTers| 0x0050|  | X| X|
X|  | ParaMeTer_DesCrIPTIOn| 0x0051|  | X| X|
Category – Product Information
X|  | DeVICe_InFO| 0x0060|  | X| X|
X|  | PrODUCT_DeTaIl_ID_lIsT| 0x0070|  |  |  |
X|  | DeVICeMODel DesCrIPTIOn| 0x0080|  |  | X|
X|  | ManUFaCTUrer_laBel| 0x0081|  |  | X|
X| X| DeVICe_laBel| 0x0082|  |  | X|
X| X| FaCTOrY_DeFaUlTs| 0x0090|  |  | X| reset Defaults
X|  | lanGUaGe_CaPaBIlITIes| 0x00a0|  |  |  |
X| X| lanGUaGe| 0x00B0|  |  |  |
X|  | sOFTWareVersIOn laBel| 0x00C0|  | X| X| Version
X|  | BOOTsOFTWare VersIOn_ID| 0x00C1|  |  |  |
X|  | BOOTsOFTWare VersIOn_laBel| 0x00C2|  |  |  |
Category – DMX512 setup
X| X| DMX_PersOnalITY| 0x00e0|  |  | X| DMX Mode
X|  | DMXPersOnalITY DesCrIPTIOn| 0x00e1|  |  | X|
X| X| DMX_sTarT_aDDress| 0x00F0|  | X| X| address
X|  | slOT_InFO| 0x0120|  |  | X|
X|  | slOT_DesCrIPTIOn| 0x0121|  |  | X|
X|  | DeFaUlT_slOT_ValUe| 0x0122|  |  | X|
Category – sensors 0x02xx Use
X|  | sensOr_DeFInITIOn| 0x0200|  |  | X|
X| X| sensOr_ValUe| 0x0201| Fan speed and|  | X| Diagnostics
 | X| reCOrD_sensOrs| 0x0202|  |  |  |
Category – Dimmer settings 0x03xx – FUTUre Use
X| X| Dimmer Curve| 0x0343|  |  | X|
GET ALLOWED| SET ALLOWED| RDM PARAMETER IDS| VALUE| COMMENT| ESTA STANDARD| REQUIRED /| DMX / UI DESCRIPTION
---|---|---|---|---|---|---|---
X|  | Dimmer Curve Description| 0x0344|  |  | X|
X| X| Modulation Frequency| 0x0347|  |  | X|
X|  | Modulation Frequency Description| 0x0348|  |  | X|
Category – Power / lamp settings 0x04xx
X| X| DeVICe_HOUrs| 0x0400|  |  | X| Fixture Hours
X| X| laMP_HOUrs| 0x0401|  |  |  |
X| X| laMP_sTrIKes| 0x0402|  |  |  |
X| X| laMP_sTaTe| 0x0403|  |  |  |
X| X| laMP_On_MODe| 0x0404|  |  |  |
X| X| DeVICe_POWer_CYCles| 0x0405|  |  |  |
Category – Display settings 0x05xx
X| X| DIsPlaY_InVerT| 0x0500|  |  |  |
X| X| DIsPlaY_leVel| 0x0501|  |  |  |
 |  | Category – Configuration 0x06xx|  |  |  |  |
X| X| Pan_InVerT| 0x0600|  |  |  |
X| X| TIlT_InVerT| 0x0601|  |  |  |
X| X| Pan_TIlT_sWaP| 0x0602|  |  |  |
X| X| real_TIMe_ClOCK| 0x0603|  |  |  |
Category – Control 0x10xx
X| X| IDenTIFY_DeVICe| 0x1000|  | X| X|
 | X| reseT_DeVICe| 0x1001|  |  | X|
X| X| POWer_sTaTe| 0x1010|  |  |  |
X| X| PerFOrM_selFTesT| 0x1020| all Test, Pan/Tilt, encoder|  |  |
X|  | selF_TesT_DesCrIPTIOn| 0x1021|  |  |  |
 | X| CaPTUre PreseT| 0x1030| see e1- 20_2010a|  |  |
X| X| PreseT PlaYBaCK| 0x1031| Table a-7 defines|  |  |
 |  | esTa reserved Future rDM| 0x7Fe0- 0x7FFF|  |  |  |
 |  | Manufacturer-specific PIDs| 0x8000-

0xFFDF

|  |  |  |
X| X| Output Power Mode| 0x8a97| Value range depends on options (standard, studio, etc)|  | X| leD Output Mode
X| X| Pan/Tilt Feedback (On/Off)| 0x8aD3|  |  |  |
X| X| Display On Time| 0x8aa0| Value range depends on options|  | X| Display On Time
X| X| leD Dimmer Curve| 0x8aa1| Value range depends on options|  |  | leD Dimming Curve
X| X| Pan Tilt Movement (On/Off)| 0x8aa2|  |  |  |
X| X| Head Motor Movement (On/ Off)| 0x8aa3|  |  |  |
GET ALLOWED| SET ALLOWED| RDM PARAMETER IDS| VALUE| COMMENT| ESTA STANDARD| REQUIRED /| DMX / UI DESCIPTION
---|---|---|---|---|---|---|---
X| X| auto shutdown Mode|

0x8aa4

| Value range depends on options|  |  |
X| X| leD Hours| 0x8aa5|  |  |  |
X| X| Dim snap (On/Off)| 0x8aa6|  |  |  |
X| X| Color snap (On/Off)| 0x8aa7|  |  |  |
X| X| auto Fan Mode (On/Off)| 0x8aa8|  |  |  | leD Fan Mode
X| X| Gamma shift| 0x8aa9| Value range depends on options|  |  |
X| X| Tungsten Dimming (On/ Off)| 0x8aaa|  |  |  |
X| X| CTB Correction (On/Off)| 0x8aaB|  |  |  |
X| X| leD refresh rate| 0x8aaC| Value range depends on options|  |  | leD refresh rate
X| X| side Hang (On/Off)| 0x8aaD|  |  |  |
X| X| Focus Track (On/Off)| 0x8aae|  |  |  |
 | X| Control signel select DMX only/artneT (On/Off)| 0x8aaF|  |  |  |
| X| recalibrate Fixture (level)|

0x8aB0

| different levels (all, position, color, etc)|  |  |
X| X| DMX Fail (Hold, Blackout, GOTO Preset)| 0x8aB1|  |  |  | DMX Fail
X| X| artnet Universe| 0x8aB2|  |  |  |
X| X| artnet net| 0x8aB3|  |  |  |
X| X| artnet sub-net| 0x8aB4|  |  |  |
X| X| artnet ethernet IP| 0x8aB5|  |  |  |
X| X| artnet ethernet sub-net Mask| 0x8aB6|  |  |  |
X| X| Manual PreseT Playback Power Up Preset| 0x8aB7|  |  |  |
X| X| Manual PreseT Playback Preset Intensity| 0x8aB8|  |  |  |
X| X| Manual PreseT Playback Priority| 0x8aB9|  |  |  |
X| X| Manual PreseT Playback Power Up?| 0x8aBa|  |  |  |
X| X| leD Color Calibration (On/ Off)| 0x8aBB|  |  | X| leD Color Calibration

CARE AND MAINTENANCE

TROUBLESHOOTING
The following are a few common problems that may occur during operation.

• The luminaire does not work; light and fan do not turn on.
  • Check power connection and main fuse.
  • Measure the mains voltage on the main connector.
• Not responding to DMX controller.
  • If DMX LED is not illuminated, verify that the DMX cables are properly connected.
  • If the DMX LED is illuminated and there is no response, verify DMX address settings and the DMX polarity.
  • If you experience intermittent DMX signal problems, check the pins on the connectors or on the PCB.
  • Test with a different DMX controller.
  • Check if the DMX cables run near or alongside high-voltage cables that may cause interference to the DMX interface circuit.

CLEANING
Cleaning the inside of the luminaire must be carried out periodically in order to optimize the light output. Cleaning frequency depends on the environment in which the fixture operates. Damp, smoky or particularly dusty surroundings can cause greater accumulation of dirt on the fixture’s optics.

• Clean with a soft cloth using glass cleaning fl uid.
• Dry parts carefully.
• Clean the external optics at least every 30 days.

FAN SPEED AND CONTROL

All Vari-lite luminaires will be governed by the same Fan speed v Noise levels v Maximum power output rules as details below. These noises related to these levels will confirm to Noise Criteria levels details of which are contained within the document.
There are 3 control parameters can be selected separately or in conjunction when permitted to manage Fan speed v Noise levels v Maximum power output.
NOTE: Not all fixture have all modes or functions refer to DMX map and User interface menu tree to see if you product has one of more of these functions.

Item 1 – Fan ‘v’ Output Preset Modes
These modes are selectable at either/or the fixtures DMX control channel or via the fixture user interface screen. The section of the modes works in conjunction with Items 3 and will also active or deactivate the Item 2.

• Boost mode – LED output boosted to >120% of standard output fan speeds increased manage heat level of LED (may be limited to only run for XXhrs). Fixture will not exceed NC45 – NC55 sound levels in this mode
• Standard mode – Full LED Output + Fan Spin at top speed (loudest setting). Fixture will not exceed NC40 sound levels in this mode
• Studio Mode – Fan speed reduced to appropriate amount to reduce dB levels 10% of full speed + LED @ max output approximately 80% of Standard output at appropriate level to ensure LED work at optimum temperature and output efficiency (fan speed remains at a constant speed and do not ramp up or down) NC35
• Whisper mode – Fan speed reduced to appropriate amount to reduce dB levels to >30% of the full speed + LED Max output approximately 60% of Standard output at appropriate level to ensure LED work at optimum temperature and output efficiency (Fan speed remains at a constant speed and do not ramp up or down) NC25
• Silent Mode – ideally Fans do not spin + output capped at appropriate level to ensure LED work at optimum temperature and output efficiency (Fan should never switch on in this mode or change speed if they on) NC15 target level.

MODE| LED OUTPUT| FAN SPEED| NOISE CRITERIONEQUIVALENT SOUND
LEVEL DBA (@3M)|
---|---|---|---|---
Boost Mode| >100%| Boosted fan speed constant| NC45| 50
Standard Mode| Full 100%| Full 100% constant| NC40| 45
Studio Mode| 80%| Appropriate speed to reduce dB levels >10% of full speed| NC35| 40
Whisper Mode| 60%| Appropriate speed to reduce dB levels >30% of full speed| NC25| 35
Silent Mode| TBC| Fan off| NC15| 25
NOISE CRITERION| OCTAVE BAND CENTER FREQUENCY (HZ)
---|---
63| 125| 250| 500| 1000| 2000| 4000| 8000
SOUND PRESSURE LEVELS (DB)
NC-15| 47| 36| 29| 22| 17| 14| 12| 11
NC-20| 51| 40| 33| 26| 22| 19| 17| 16
NC-25| 54| 44| 37| 31| 27| 24| 22| 21
NC-30| 57| 48| 41| 35| 31| 29| 28| 27
NC-35| 60| 52| 45| 40| 36| 34| 33| 32
NC-40| 64| 56| 50| 45| 41| 39| 38| 37
NC-45| 67| 60| 54| 49| 46| 44| 43| 42
NC-50| 71| 64| 58| 54| 51| 49| 48| 47
NC-55| 74| 67| 62| 58| 56| 54| 53| 52
NC-60| 77| 71| 67| 63| 61| 59| 58| 57
NC-65| 80| 75| 71| 68| 66| 64| 63| 62
NC-70| 83| 79| 75| 72| 71| 70| 69| 68

TECHNICAL SUPPORT

GLOBAL 24HR TECHNICAL SUPPORT:
Call: +1 214 647 7880
entertainment.service@signify.com

NORTH AMERICA SUPPORT:
Call: 877-VARI-LITE (877-827-4583)
entertainment.service@signify.com

EUROPEAN CUSTOMER SERVICE CENTER:
Call: +31 (0) 543 542 531
entertainment.europe@signify.com

©2024 Signify Holding. All rights reserved.
All trademarks are owned by Signify Holding or their respective owners. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Data subject to change.

References

• Home | Vari-Lite

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>