V-TAC VT-7605 Led Designer Surface Pendant Instruction Manual

V-TAC VT-7605 Led Designer Surface Pendant

Product Information

The LED Designer Surface Pendant is a stylish lighting fixture that combines a modern design with energy-efficient LED technology.
It features an aluminum and PC lamp body, providing durability and a sleek appearance. The pendant operates on AC power with a voltage range of 220-240V and a frequency of 50/60Hz. The model VT-7605 has a power output of 3 watts and produces a dimmable light with adjustable color temperature.

The pendant comes with a remote control that uses 2.4G RF technology for easy operation. It is also TRIAC dimmable, allowing you to adjust the brightness according to your preference. The product comes with a warranty period of 3 years, ensuring quality and customer satisfaction.

INSTALLATION DIAGRAM:

Installation

1. Switch off the power before starting the installation.
2. Fix the ceiling plate to the ceiling using screws.
3. Connect the supply wires to the luminaire following the wiring diagram.
4. Attach the ceiling base to the ceiling plate using screws.
5. Switch on the lamp to check the light.

Maintenance

1. Clean and check the lamp regularly for safety and optimal performance.
2. Switch off the power before cleaning.

Remote Control Instructions

The pendant comes with a remote control for convenient operation. Here are the functions of the remote control buttons:

• Turn On: Press and hold the turn on button within 4 seconds to turn on the LED lamps.
• Brightness +: Adjusts the brightness level of the fixture.
• Cold Light: Activates the cold light mode.
• Turn Off: Press and hold the turn off button within 4 seconds to turn off the LED lamps.
• Brightness -: Adjusts the brightness level of the fixture.
• Warm Light: Activates the warm light mode.
• Night Light: Activates the night light mode.

Connecting/Disconnecting Remote Control

To connect the remote control with the fixture, follow these steps:

1. Ensure that the LED lamps are powered on.
2. Press and hold the turn on button within 4 seconds. The LED lamp will flash once slowly, indicating a successful match code.

To disconnect the remote control from the fixture, follow these steps:

1. Turn off the LED power supply for 10 seconds.
2. Turn on the LED power supply.
3. Press and hold the turn off button within 4 seconds. The LED lamp will flash twice slowly, indicating a successful clear code.

Note: The clear code function is only applicable if the fixture has already been matched with a code. If there is no previous match code, or if a new remote control is used to match code again, the previous remote control record will be automatically cleared by the system.

HOW TO CONNECT/DISCONNECT THE REMOTE CONTROL WITH THE FIXTURE

1. Match Code function:
   [The remote control only can be used after matching code with the LED lamps], follow the below method

   • Turn off LED power supply for 10s (seconds), then turn on LED power supply, long press turn on button within 4s (seconds) at once, if LED lamp will flash once slowly, it means match code is successful.
     Note: Lighting fixture can only control by last successful match code.

   • For instance, one lighting fixture can match code with many remote controls successfully, but only recent matched remote control can control this lamp, those previous remote control record will be auto-clear by the system.

2. Clear code function: Turn off LED power supply for 10s (seconds), then turn on LED power supply, long press turn off button within 4s (seconds) at once, if LED lamp will flash twice slowly, it means clear code successfully. Note: Clear code function based on fixture has matched code already, if not matched then long pressing the turn off button will result in no effect.
   For example:

3. There is no clear code function, if this remote control do not match code with fixture first.

4. Finish match code and then process clear code.

5. If fixture already match code and then you use another new remote control to match code again, the previous remote control record would be auto-cleared by system, so now LED will be without clear code function now.

6.  Remote control with remember record function after powering off. Fixture brightness and match code record will keep stay on LED remote control’s storage after using remote control adjust fixture brightness. So it can use the previous remote control to control the previous lamp after powering on.

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
4. Proper grounding should be ensured throughout the installation.
5. Installation must be performed by a certified person.
6. For Indoor use only
7. Switch off the power in case of abnormal performance and contact a professional technician or local dealer

This marking indicates that this product should not be disposed of with other household wastes.

For any queries or issues with the product, please contact us at

Email: support@v-tac.eu
For more product range and inquiries, please contact our distributor or nearest dealers.

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>