Rocksteady B3B Portable Bluetooth Speakers/ Stadium Sound System User Guide

Rocksteady B3B Portable Bluetooth Speakers/ Stadium Sound System

Product Information

Specifications:

• Product Name: Rocksteady Stadium Firmware Updates
• Build Version: B3B and Stadium Subwoofer Only
• Release Date: April 2024
• Compatibility: Windows PC
• Connection Type: Type-C DATA cable

Product Usage Instructions

Step 1: Downloading and Installing the Firmware Update

1. Download both folders from the provided link to your Windows PC.
2. Extract the downloaded files to a new folder on your Windows PC.
3. Install the updater software by double-clicking the SETUP file.
4. Complete the software installation by following the on-screen prompts.

Step 2: Preparing the Installer to Update Your Speakers and Subwoofer

1. Locate and run the Multimedia Product Tool.
2. Select the correct *.fw firmware file for the device (Speaker or Subwoofer) and choose to replace without modifying presets.

Step 3: Updating Speakers and Subwoofer

1. Connect the speaker to your PC using a Type-C DATA cable.
2. Turn on the speaker and tap the POWER button 15 times quickly to initiate the update.
3. The down arrow icon will illuminate green when the connection is established.
4. Select the DOWN ARROW to install the firmware update. The installation process takes about 20 seconds.

Troubleshooting:

1. If the speaker is not connecting to the software, ensure you are using a Type-C DATA cable and repeat the power button tapping process.
2. If you can’t pair your source device after the update, look for the new Bluetooth ID name “Rocksteady_XXXX” to connect.

FAQs

• Q: What’s new in this firmware update?
  A: The update includes newly developed cone drivers, a new wireless system for longer range and connectivity, and improved processor, circuitry, and architecture.

Downloading and installing the firmware update

• Download both folders to your Windows PC: https://drive.google.com/drive/folders/1W_WT9NICxKC24JQmGW2YHfKaG653c4un?usp=sharing.
• Extract the downloaded files to a new folder:
• Install the updater software:
• Complete the software installation:

Preparing the installer to update

1. Preparing the installer to update your speakers and subwoofer.

Troubleshooting and FAQ’s

1. The speaker is not connecting to the software (the install down arrow does not turn green indicating a connection):
   • If the speaker is not connecting to the software, repeat the process of taping the power button 10-15 times (in other words… try again). If it still won’t connect, then it is likely that your Type-C cable is not a DATA cable.
2. You can’t pair your source device to the speakers after the firmware update.
   • The Bluetooth ID name of the speaker will change after the firmware update. You will need to pair to this speaker and connect to the new device name (Rocksteady_XXXX).

What’s new?

1. Newly developed cone drivers.
2. A new wireless system, including new antenna and drivers, for longer range and connectivity.
3. New processor, circuitry, and architecture
   • a) Runs cooler and lasts longer, now with 30 hours battery life per charge.
4. Dual EQ options
   • a) FULL MODE: Each speaker has a pleasing fullness that fills a room with smooth yet clear full sound.
   • b) CLEAR MODE:  the speakers are tuned to approximate studio sound clarity.
   • c) The Rocksteady Stadium subwoofer also features 2 EQ options, optimized for each speaker sound profile; or mix and match.
5. Overall and general fixes and updates.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>