EBS The Drive Boost Overdrive Owner’s Manual

June 17, 2024
EBS

EBS The Drive Boost Overdrive

EBS-The-Drive-Boost-Overdrive-PRODUCT

Product Information

Specifications

  • Power Supply Input: Stabilized 9-12V DC with a standard 2.1mm contact, center negative
  • Controls: DRIVE, OUTPUT, ON/OFF SWITCH, TONE, VOLUME, INPUT
  • Can be powered by a 9V DC battery (battery not included)

Description
EBS The Drive is an analog boost/overdrive pedal developed by EBS with input from several Swedish top session guitarists. It is designed to provide an extra boost to your tone and make it stand out. The Drive can be used with both guitar and bass and helps boost the bass tone when engaged. The DRIVE knob controls the input gain/drive level, allowing you to bring out vintage- style bass tones or keep it subtle for a cleaner boost. The TONE knob shapes the tone range of the effect from darker to brighter, while the VOLUME knob sets the output volume of the pedal. The pedal features a relay type footswitch for switching it on and off.

Usage Instructions

Powering the Pedal

  1. Connect a power supply that provides stabilized 9-12V DC with a standard 2.1mm contact, center negative to the POWER SUPPLY INPUT.
  2. Alternatively, you can use a 9V DC battery. Remove the bottom plate of the pedal and attach a 9V DC battery.

Connecting the Pedal

  1. Connect your instrument or the previous device in your signal path to the INPUT jack.
  2. Connect the output of the pedal to your amplifier or the next device in your signal path.

Adjusting the Settings:

  1. Use the DRIVE knob to control the input gain/drive level. Higher drive levels will increase the overall output as well.
  2. Use the TONE knob to shape the tone range of the effect from darker to brighter.
  3. Use the VOLUME knob to set the output volume of the pedal.

Sample Sound Settings
For sound samples and suggested settings, please visit ebssweden.com and go to the dedicated page for The Drive. However, we recommend spending some time with the pedal to find your own favorite sounds with your unique setup.

Recommended Accessories

  • EBS AD-9+ Power Supply
  • EBS DC-Split Cables (1 to 2, 4, or 6 models with straight or angled contacts) for distributing power to multiple pedals
  • EBS Flat Patch Cables for connecting pedals, available in Deluxe and Premium Gold Plated versions

Troubleshooting Guide
Please consult the following checkpoints before contacting authorized EBS service centers or [email protected]:

  1. Check if the cable(s) are working properly.
  2. Ensure that the 1/4″ plugs are properly connected all the way in.
  3. Make sure the instrument cable is attached to the right (input) jack and the amp cable is connected to the left (output) jack.
  4. Check if the pedal has a battery and if the battery is functioning.
  5. Verify if the indicator LED lights up when pressing the footswitch alternatively.

FAQ

Can I use EBS The Drive with bass?
Yes, you can use EBS The Drive with bass. It helps boost your bass tone when engaged. Use the DRIVE knob to control how much you’d like it to break up. Crank it up to bring out some nice vintage-style bass tones from your amp or keep it subtle if you prefer a cleaner boost.

USERS MANUAL

THANK YOU FOR PURCHASING THE DRIVE-ANALOG BOOST/OVERDRIVE PEDAL FROM EBS!
THE DRIVE is developed by EBS with input from several Swedish top session guitarists. The Drive gives you that extra boost you need to emphasize your tone and make it stand out. The kind of device you might leave on without thinking about it, but miss dearly when you turn it off.

Can I use it with bass too?
The Drive helps boost your bass tone when engaged. Use the Drive knob to control how much you’d like it to break up. Crank it up to bring out some nice vintage style bass tones from your amp or keep it subtle if you prefer a cleaner boost. /The EBS Team

Visit EBSSWEDEN.COM for info on all EBS effects, amps and accessories.

THE CONTROLS

EBS-The-Drive-Boost-Overdrive- \(2\)

SAMPLE SOUND SETTINGS
For sound samples and suggested settings, please visit ebssweden.com, and go to the dedicated page for The Drive.
However, we really recommend you to simply spend some time with the pedal to find your own favourite sounds with your unique setup!

RECOMMENDED ACCESSORIES
We recommend to use this pedal with the EBS AD-9+ Power Supply.
If you use more than one pedal in the setup, you can use the EBS DC daisy- chain cables to distribute power to up to 20 pedals.
We also recommend the original EBS PCF Flat Patch Cables to connect your pedals. These are available in a Deluxe (improved standard) and Premium Gold Plated version and offers ultimate space-saving and elegant setup of pedals on any pedal board!

EBS-The-Drive-Boost-Overdrive- \(3\)

TROUBLESHOOTING GUIDE

Please consult the following checkpoints, before consulting one of the authorized EBS service centers or [email protected]

Checkpoint

  1. Does the cable(s) work properly?
  2. Are the 1/4” plugs properly connected all the way in?
  3. Are the Instrument cable attached to the Right (input) jack, and the Amp cable connected to the Left (output) jack?
  4. Does the pedal have a battery, and is the battery OK?
  5. Does the indicator LED light when pressing the foot switch alternatively?
  6. Does the instrument work?
  7. Does the amplifier work and is the volume turned up?
  8. If you are using a DC adapter, Are you using an EBS AD-9?

Action if answered NO

  • Replace cable(s).
  • Push the 1/4” plugs all the way in.
  • Reconnect input and output jacks.
  • Put a new battery in the pedal.
  • Replace/put in battery, or use a DC power supply.
  • Check the instrument.
  • Turn up volume or check the amp at your nearest EBS service center.
  • Check the voltage and polarity of the adapter you are using.

EBS offers a wide range of effects for bass, guitar and beyond. Visit www.ebssweden.com to learn more.

EBS-The-Drive-Boost-Overdrive- \(4\) EBS-The-Drive-
Boost-Overdrive- \(5\)

TECHNICAL SPECIFICATIONS EBS THE DRIVE

  • Nominal Input Level -10 dBv
  • Input Impedance 900 kohms
  • Output Impedance <700 ohms
  • Tone frequency range 1-20 kHz (passive LP)
  • Dimensions: Width 2.6” (66.5 mm)
  • (including all Height 4.5” (113 mm)
  • hardware) Depth 1.9” (48 mm)
  • Weight 300g (0.66 lbs)
  • Power Requirements 9 – 12 V DC Regulated, 30 mA max.
  • Protected against accidental over voltage up to 18 V.

Specifications are subject to change without notice.
If you did not find the answer in this manual, please contact EBS at [email protected]
www.ebssweden.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

EBS User Manuals

Related Manuals