FISHER PAYKEL AHP3RD3684WDC Professional Round Flush Handle Kit User Guide
- June 1, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL AHP3RD3684WDC Professional Round Flush Handle Kit
Product Information
Specifications:
- Product Name: Professional Round Flush Handle Kit for Integrated Refrigerator Freezer, 36
- SKU: 26777
- Material: Stainless steel with PVD coating
- Finish: Brushed satin with dark copper off-stands
- Quantity: Two pieces supplied
- Designed for: Integrated Refrigerator Freezer, 36
Product Usage Instructions
- Identify the location on your Integrated Refrigerator Freezer, 36 where the handle kit will be installed.
- Remove any existing handles or hardware from that location if needed.
- Take the two pieces of the handle kit provided.
- Align the holes on the handles with the pre-drilled holes on the refrigerator door or drawer front.
- Secure the handles in place using the appropriate screws or fasteners.
- Ensure the handles are firmly attached and provide a secure grip for opening and closing the appliance.
- Check the alignment and adjust if necessary to ensure a uniform look across the appliance.
Frequently Asked Questions (FAQ):
-
Q: Can this handle kit be used on other refrigerator models?
A: This handle kit is specifically designed for use with the Integrated Refrigerator Freezer, 36. It may not be compatible with other models. -
Q: How should I clean and maintain the handle kit?
A: Use a soft cloth and mild soapy water to clean the handle kit. Avoid abrasive cleaners that may damage the finish. Regularly check the screws for tightness to prevent loosening over time. -
Q: Are installation tools included with the handle kit?
A: Installation tools such as screws or fasteners required for securing the handle kit are typically included. However, you may need additional tools like a screwdriver for installation.
QUICK REFERENCE GUIDE > AHP3RD3684WDC
Professional Round Flush Handle Kit for Integrated Refrigerator Freezer, 36″
Customize your Integrated Refrigerator Freezer, 36″ to complement your kitchen interior with this Handle Kit, featuring a brushed satin finish and dark copper off-stands.
- Designed for the Integrated Refrigerator Freezer, 36″
- Stainless steel handles with dark copper-colored off-stands, ideal for both light and dark kitchens
- PVD coated
- Two pieces supplied
- SKU 26777
The product dimensions and specifications in this page apply to the specific
product and model. Under our policy of continuous improvement, these
dimensions and specifications may change at any time. You should therefore
check with Fisher & Paykel’s Customer Care Centre to ensure this page
correctly describes the model currently available. Fisher & Paykel Appliances
Ltd 2020
Where applicable:
- All appliances use energy, and energy usage typically generates carbon emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy. This is calculated either annually or per cycle, using the product’s market-specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region.
- Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products. For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.
Other product downloads available at fisherpaykel.com
A PEACE OF MIND SALE
24 Hours 7
Days a Week Customer Support T 1.888.936.7872
www.fisherpaykel.com