Globlazer US-0015001 Cat Tree User Guide
- June 1, 2024
- Globlazer
Table of Contents
Globlazer US-0015001 Cat Tree
Product Specifications
- X2: 400mm x 300mm
- X2: 300mm x 200mm
- X8: 280mm
- X6: 300mm x 300mm X25
- X3: M8X30mm
- X2: M8X35mm
- X1: M8X65mm
Product Usage Instructions
Assembly Steps:
- Start by identifying the different components and hardware based on the provided list.
- Follow the assembly sequence specified in the manual for proper installation.
- Use the appropriate tools to secure the components together using the provided hardware.
- Double-check all connections and ensure everything is properly aligned before tightening.
Maintenance Tips
- Regularly inspect the product for any signs of wear or damage.
- Tighten any loose hardware to maintain structural integrity.
- Clean the product using a damp cloth and mild detergent, avoiding harsh chemicals.
- Store the product in a dry and stable environment when not in use to prolong its lifespan.
Safety Precautions
- Wear appropriate protective gear, such as gloves and safety goggles, when handling the product.
- Avoid overloading the product beyond its specified weight capacity.
- Keep small parts away from children to prevent choking hazards.
- If unsure about assembly or usage, seek professional assistance or contact customer support.
Frequently Asked Questions (FAQ)
Q: How do I know if I am using the correct hardware for assembly?
A: Refer to the provided list of hardware specifications in the manual and
match them with the components during assembly.
Q: Can I customize the dimensions of the product?
A: It is recommended to follow the specified dimensions for proper assembly
and structural integrity. Customizations may affect stability.
Q: What should I do if a component is missing from the package?
A: Contact customer support immediately with your purchase details to
request a replacement component.
General Guidelines
- Please read the following instructions carefully and use the product accordingly.
- Please keep this manual and hand ii over when you transfer the product.
- This summary may not include every detail of all variations and necessary steps. Please contact us when further information and help are needed.
Notes
- The scratching post is only intended for cats to play, climb, and sharpen their claws. The seller does not assume any responsibility or liability concerning any damage caused by incorrect assembly or improper use.
- The product is intended for indoor use only, not for commercial use or outdoor use.
- During the installation, please follow the correct steps and take necessary security measures, such as wearing a pair of gloves, to avoid injuring your hands.
- After installation, please check and tighten all screws. Then, 2-3 days later, check again to ensure that the screws are properly tightened.
- Check the firmness of all the screws at leas t once a month.
- Do not put any other objects on the cat tree.
- After assembly, place the product in a well-ventilated area for 3-5 days to eliminate the smell.
- Make sure the product is placed on an even floor to prevent toppling hazards. It is recommended to place it against a wall comer and use the included anti-toppling fittings to secure ii to the wall.
- Use a hair remover for daily care. Do not clean with water or other liquid detergents. Always keep the cat tree dry.
- Keep away from heat sources, humidity, and corrosive chemicals, and avoid direct sunlight.
Warnings
- This product is not a toy. Do not stand or climb to avoid the risk of injuries. Keep away from children. Be aware of danger!
- If your cat starts to chew or eat the furry balls or elastic bands, please remove the toys and keep them out of the reach of your cat.
- Persons with allergies should avoid assembling the product.
- Keep children away during assembly as small parts may be fatal if’ swallowed or inhaled. Keep all packaging materials (film, plastic bag, foam, etc.) out of the reach of children and babies to avoid choking, suffocation, and other potential risks.
WHAT IN THE BOX
INSTALLATION INSTRUCTION
- Even the box it comes in can be made to a cat box with a pair of scissors and some tape in just a few simple steps (scissors and tape are not included).
- Your love,We prove
Read User Manual Online (PDF format)
Loading......