Globlazer US-0015701 F57 Cat Tree Scratching Post Instruction Manual
- June 1, 2024
- Globlazer
Table of Contents
Globlazer US-0015701 F57 Cat Tree Scratching Post
Specifications
- Dimensions: 400mm x 133mm x 280mm
- Weight: 17 lbs
- Material : Various, as indicated in the manual
Product Usage Instructions
Assembly
- Identify the components labelled with letters and numbers according to the manual.
- Use the provided screws and tools to assemble the product following the sequence in the manual.
- Ensure all parts fit securely and are tightened properly.
Installation
- Choose a suitable location for the product.
- Follow the installation steps provided in the manual to set up the product.
- Check for stability and adjust if necessary.
Maintenance
Regularly clean the product with a damp cloth. Avoid using harsh chemicals that may damage the material.
FAQ
- Q : How do I disassemble the product?
- A : To disassemble, follow the assembly instructions in reverse order. Make sure to keep track of all components for reassembly.
- Q: Can I use the product outdoors?
- A : It is recommended to use the product indoors to prevent damage from outdoor elements.
General Guidelines
- Please read the following instructions carefully and use the product accordingly.
- Please keep this manual and hand ii over when you transfer the product.
- This summary may not include every detail of all variations and necessary steps. Please contact us when further information and help are needed.
Notes
The scratching post is only intended for cats to play, climb, and sharpen
their claws. The seller does not assume any responsibility or liability with
respect to any damage caused by incorrect assembly or improper use.
The product is intended for indoor use only, not for commercial use or outdoor
use. During the installation, please follow the correct steps and take
necessary security measures, such as clearing a pair of gloves, to avoid
injuring your hands.
- After installation, please check and tighten all screws. Then, 2-3 days later, check again to ensure that the screws are properly tightened.
- Check the firmness of all the screws at least once a month.
- Do not put any other objects on the cat tree.
- After assembly, place the product in a well-ventilated area for 3-5 days to eliminate the smell. Make sure the product is placed on an even floor to prevent toppling hazards. It is recommended to place ii against a wall comer and use the included anti-toppling fittings to secure ii to the wall.
- Use a hair remover for daily care. Do not clean with water or other liquid detergents. Always keep the cat tree dry. Keep away from heat sources, humidity, and corrosive chemicals, and avoid direct sunlight.
Warnings
- This product is not a toy. Do not stand or climb to avoid the risk of injuries. Keep away from children. Be aware of danger!
- If your cat starts to chew or eat the furry balls or elastic bands, please remove the toys and keep them out of the reach of your cat.
- Persons vvith allergies should avoid assembling the product.
- Keep children away during assembly as small parts may be fatal if’ swallowed or inhaled. Keep all packaging materials (film, plastic bag, foam, etc.) out of the reach of children and babies to avoid choking, suffocation, and other potential risks.
PARTS
Dimensions
USING INSTRUCTION
WHAT IS IN THE BOX
Even the box it comes in can be made to a cat box with a pair of scissors and some tape in just a few simple steps (scissors and tape are not included).