Globlazer US-0016001 Cactus Cat Tree For Indoor Multiple Instruction Manual
- June 1, 2024
- Globlazer
Table of Contents
Globlazer US-0016001 Cactus Cat Tree For Indoor Multiple
Product Information
Specifications
- Product Name: CAT TREE
- Model Number: US-0016001
General Guidelines
Please read the following instructions carefully and use the product
accordingly. Please keep this manual and hand it over when you transfer the
product. This summary may not include every detail of all variations and
necessary steps. Please contact us when further information and help are
needed.
Notes
Warnings:
- This product is not a toy. Do not stand or climb to avoid the risk of injuries. Keep away from children.
- Be aware of danger! If your cat starts to chew or eat the furry balls or elastic band, please remove the toys and keep them out of the reach of your cat.
- Persons with allergies should avoid assembling the product.
- Keep children away during assembly as small parts may be fatal if swallowed or inhaled.
- Keep all packaging materials (film, plastic bag, foam, etc.) out of the reach of children and babies to avoid choking, suffocation, and other potential risks.
Additional Information
Even the box it comes in can be made into a cat box with a pair of scissors
and some tape in just a few simple steps (scissors and tape are not included).
Product Usage Instructions
- Step 1: Unbox all parts carefully and lay them out in an organized manner.
- Step 2: Follow the provided assembly instructions to build the CAT TREE.
- Step 3: Ensure all parts are securely connected and tightened to prevent any accidents.
- Step 4: Place the CAT TREE in a suitable location away from hazards or edges.
- Step 5: Introduce your cat to the CAT TREE and supervise initial interactions.
- Step 6: Regularly inspect the CAT TREE for any signs of wear or damage, and make repairs or replacements as needed.
FAQ
-
Q: Can the CAT TREE be disassembled for storage or relocation?
A: Yes, the CAT TREE can be disassembled following the reverse steps of assembly for storage or relocation. -
Q: How should I clean the CAT TREE?
A: Use a soft damp cloth to wipe down the surfaces of the CAT TREE. Avoid using harsh chemicals that may harm your cat.
General Guidelines
- Please read the following instructions carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and necessary steps. Please contact us when further information and help are needed.
Notes
- The scratching post is only intended for cats to play, climb, and sharpen their claws. The seller does not assume any responsibility or liability with respect to any damage caused by incorrect assembly or improper use.
- The product is intended for indoor use only, not for commercial use or outdoor use.
- During the installation, please follow the correct steps and take necessary security measures, such as wearing a pair of gloves, to avoid injuring your hands.
- After installation, please check and tighten all screws. Then, 2-3 days later, check again to ensure that the screws are properly tightened.
- Check the firmness of all the screws at least once a month.
- Do not put any other objects on the cat tree.
- After assembly, place the product in a well-ventilated area for 3-5 days to eliminate the smell.
- Make sure the product is placed on an even floor to prevent toppling hazards. It is recommended to place it against a wall corner and use the included anti-toppling fittings to secure it to the wall.
- Use a hair remover for daily care. Do not clean with water or other liquid detergents. Always keep the cat tree dry.
- Keep away from heat sources, humidity, and corrosive chemicals, and avoid direct sunlight.
Warnings
- This product is not a toy. Do not stand or climb to avoid the risk of injuries. Keep away from children. Be aware of danger!
- If your cat starts to chew or eat the furry balls or elastic band, please remove the toys and keep them out of the reach of your cat.
- Persons with allergies should avoid assembling the product.
- Keep children away during assembly as small parts may be fatal if swallowed or inhaled. Keep all packaging materials (film, plastic bag, foam, etc.) out of the reach of children and babies to avoid choking, suffocation, and other potential risks.
PARTS
INSTALLATION
Even the box it comes in can be made to a cat box with a pair of scissors and some tape in just a few simple steps (scissors and tape are not included
Your love,We prove
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>