JUNO T33WH H-Type Adapter Single Circuit Track Instruction Manual
- June 12, 2024
- Juno
Table of Contents
JUNO T33WH H-Type Adapter Single Circuit Track
Product Information
This product is an H-Type Adapter designed for installation purposes. It is used to connect and insert an adapter box into a track. The adapter box has a latch and a polarity line that need to be aligned correctly for proper installation.
Key Features:
- H-Type Adapter
- Latch mechanism
- Polarity line
- Track compatibility
Product Usage Instructions
-
1. Locate the latch and the polarity line on the adapter box.
-
Align the parts as shown in the diagram below.
-
Insert the adapter box into the track.
-
Rotate the adapter box in the opposite direction of the arrows until the latch snaps in place between the two track rails.
-
Continue to depress the latch until the adapter box reaches its final position.
-
- For second circuit positioning:
- Hold onto the Adapter Box with one hand.
- Place the end of a flat head screwdriver under the contact shown in the diagram below.
- Gently pull up on the screwdriver, causing the contact to move vertically until it hits a hard stop.
- Follow the instructions for inserting the adapter box into the track.
INSTALLATION INSTRUCTIONS
-
Find the latch and the polarity line.
Align parts as shown below and insert the adapter box into the track. -
Rotate the adapter box opposite the arrows until the latch snaps in place between the two track rails
-
Final Position
Second Circuit Positioning
- Hold onto Adapter Box with one hand
- Place the end of a flat head screw driver under the contact shown below
- Gently pull up, the contact should move vertically until hitting a hard stop
- Follow instructions for inserting into track
1300 S. Wolf Road • Des Plaines, IL 60018 •
800-323-5068
•www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>