Meat Grinder and Slicer Shredder Attachments for KitchenAid Stand Mixer User Guide

Stand Mixer User Guide

IMPORTANT SAFEGUARDS

When using this attachment, basic safety precautions should always be followed including the following:

1. For operation of stand mixer, refer to its operation instruction when you bought machine from its related sellers.
2. Close supervision is necessary when any appliance is used by or near children.
3. Avoid contacting moving/rotating parts.
4. Do not use the mixer outdoors. This product is designed for household use only.
5. Never feed food by hand. Always use combination food pusher.
6. Blades are sharp. Handle carefully.
7. Never leave your food grinder attachment unattended while the stand mixer is running..

Firstly, How To Assemble Food Grinder Attachment (FGA) Parts

1. Insert the grind worm(A) into the grinder body (B)
2. Place the grinding blade (C) over the square shank at the exposed end of the grind worm. Make sure blade in correct direction as shown above~ Sharp edge facing outside
3. Place grinding plate(D) over the blade, matching the tabs of the plate with the notches of the grinder body.
4. Place locking ring (E) on grinder body, turning by hand until secured but not tightenedseriously.
5. Place the Tray (F) into the body.
6. Combination food pusher (G) is used to feed food into the hopper.
7. Kidney Shape Plate(H) is ideal for sausage stuffing with staffer tube.

Secondly, To Attach Food Grinder Attachment (FGA) to Stand Mixer

After assemble FGA as above, then:

1. Turn Stand Mixer speed control to OFF and unplugged.

2. Loosen the attachment knob(a) fully by turning it counterclockwise.
   Even take the knob out of mixer, to insure next step to be achieved.

3. Insert the attachment shaft housing(b) into the attachment hub (c) making certain that attachment power shaft fits into square hub socket.

4. It may be necessary to rotate the attachment back and forth. When the attachment is in proper position, the pin on the attachment housing will fit into the notch on the hubrim.

5. Tighten the attachment knob by turning it clockwise until that attachment is completely secured into mixer.

To Use Food Grinder Attachment

Rotating Blade Hazard ! Always use food pusher ! Keep fingers out of openings.
Failure to do so can resultin amputations or cuts.

1. Cut food into small strips or pieces and feed them into hopper. Meat should be cut into long narrow strips/ cubes.
2. Turn mixer to Speed 4/5 and feed food into hopper using the food pusher.

Coarse Plate – Idea for grinding raw of cooked meats, firm vegetables, dried fruits and cheese
Medium Plate –Idea for grinding raw meat, cooked meats for spreads and break crumbs.
Fine Plate – Idea for grinding meat for fine grind for casing and curing, or raw meat without fat, no any tendons.
Grinding Meat – For better mix and more tender results, grind beef twice. Best texture results from grinding very cold or partially frozen meat. Frozen fatty meats should be ground only once. Recommend less fatty.
Grinding Bread – To grind bread for crumbs, be sure that bread is either oven dried thoroughly to remove all moisture, or not dried at all . Partially dried bread may jam the Food Grinder.
NOTE : Very hard, dense foods such as totally dried homemade bread should not be ground. Homemade bread should be ground fresh and then oven or air- dried.

Stuffing Sausage -With additional accessories-Sausage Stuffer Tube, FGA can become a sausage stuffer. Assembly sequence as below picture-Grind Worm (A), Blade (C), Kidney Grind Plate (H), Stuffer Tube and Locking Ring(E)
Highly recommend following steps to stuff sausage:
No Need to Grind Meat double times, Only One Time! From grinding meat directly to stuffing sausage at the same time.

1. Cut raw meat to short narrow cubes
2. Mix Sausage seasonings and other ingredients together withthe cut meat (from 1st step)
3. Freeze the Mixed meat with seasonings (from 2nd step) for a while, or just put it aside for a few minutes to let water drained.
4. Then put the waterless or partially frozen meat on food tray to stuff sausage directly.

Therefore do NOT need to grind the meat firstly before stuffing the sausage.

To Clean Food Grinder Attachment

First completely disassemble food grinder attachment. Recommend Hand Wash for all FGA parts.
All parts are Not Dishwasher Safe! Do not wash in Dishwasher! Wash by Hand.
Suggest putting the parts in warm, sudsy water for minutes before washing, clean with soft brush or cloth.
Recommend to rinse and dry them thoroughly after wash, in order to keep them not discolor and stay in peak condition.
Remark: This Food Grinder Attachment is designed for KitchenAid Stand Mixers, but not a product of Kitchenaid, KitchenAid® are registered trademarks of their respective owners and are not endorsing, sponsoring or associated with our brand.
Note : Any question or need support on product use, please contact us via Sales Channel.

SLICER/SHREDDER ATTACHMENT

Important Safeguards

When using this attachment, basic safety precautions should always be followed including the following:

1. For operation of stand mixer, refer to its operation instruction when you bought machine from its related sellers.
2. Close supervision is necessary when any appliance is used by or near children.
3. Avoid contacting moving/rotating parts. Keep hands, utensils or other objects away from the attachment with shredding, and slicing blades, or moving parts while it is in operation to reduce the risk of severe injury to persons or damage to the attachment.
4. Do not use the mixer and this attachment outdoors. This product is designed for household use only.
5. Never feed food by hand after the food reaches feed tube. Always use food pusher.
6. Blades are sharp. Handle carefully, when inserting or removing blades or cleaning.
7. Do not remove food until Stand Mixer is OFF and the blade stops.
8. Never leave this attachment to work unattended while the stand mixer is running.

Parts Name and Accessories

(shredding)
Fine Shredding Blade| Ideal for root vegetables and green vegetables to be consumed raw, to shred almonds and nuts for baking (grating)

Note : All the blades are not for hard food, it will bend the blade, then the deform blade will touch the housing when the mixer working. For better performance, please push the food slowly and use speed 6-8.
Any question or need support, please contact us via Sales Channel.

To Attach Slice/Shredder Attachment To Stand Mixer

1. Turn Stand Mixer speed control to OFF and unplugged.

2. Loosen fully the attachment knob(A) by turning it counterclockwise.

3. Slide the blade you want to use into the attachment housing.
   You will hear a click when the blade snaps into the place properly on the drive shaft (as right picture).

4. Insert the attachment shaft housing(B) into the attachment hub (C), making certain that attachment power shaft fits into square hub socket. It may be necessary to rotate the attachment back and forth. When the attachment is proper position, the pin on the attachment housing will fit into the notch on the hub rim.

5. Tighten the attachment knob by turning it clockwise until that attachment is completely secured into mixer, make sure that hub knob is properly seated in the retention hole in the attachment.

To Operate Slice/Shredder Attachment

WARNING

1. Rotating Blade Hazard
2. Always use food pusher.
3. Keep fingers out of openings.
4. Keep away from children.
5. Failure to do so can result in amputations or cuts.

After Attachment is attached to mixer, then :

1. Cut food/fruit/vegetable so that it fits within the feed tube.
2. Turn the Stand Mixer to Speed 6/8, then use the food pusher to feed the food item into the feed tube.
3.  Push up on the Release Lever and pull out the blade for changing a new blade. Refer to Above Picture.

Note :

1. In case if mixer motor head become hot, suggest stop running after every 5 minutes to let mixer cool down before next operation.
2. For best results, feed only one item at a time into the feed tube (ex. carrot).
3. Do not feed items into the feed tube by hand; always use the food pushers. If food remains in the Slicer/Shredder attachment after running, turn the Stand Mixer to “0” (Off), remove the remaining items, and place back into the feed tube to shred or slice again.

To Clean This Attachment

Suggest putting the parts in warm, sudsy water for minutes before washing, clean with a soft brush or cloth. It can also be cleaned in the top rack dishwasher, but if you want this accessory to last longer, it is recommended to wash it by hand! Dry them thoroughly after washing to prevent them from fading and keep them in their best condition.
Remark: This Slice/Shredder Attachment is designed for Kitchen-Aid Stand Mixers, but Kitchen-Aid® are registered trademarks of their respective owners and are not endorsing, sponsoring or associated with our brand.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>